Application Sharing doesn't work

[Rojo]

No matter what I do. I'm in an IM session and I click Application Sharing or
Whiteboard and then the other party accepts. If I'm lucky enough to get the
Sharing dialog box, every setting is unavailable, and the top says "Not in a
call." But I am in a call. I opened ports on my router, but I can't even use
these features between the two computers in my LAN. I downloaded the latest
Windows Messenger (5.1) and installed it on both machines in my LAN. Does
anybody have any suggestions?

Rojo

[RAYBANKER2@msn.com]

I HAVE THE SAME PROBLEM. IT DOES NOT WORK EVER. NOT ONCE. IT JUST HANGS
AND HANGS AND HANGS PLEASE LE ME KNOW IF YOUR PROBLEM GETS RESOLVED

"Rojo" wrote:

> No matter what I do. I'm in an IM session and I click Application Sharing or
> Whiteboard and then the other party accepts. If I'm lucky enough to get the
> Sharing dialog box, every setting is unavailable, and the top says "Not in a
> call." But I am in a call. I opened ports on my router, but I can't even use
> these features between the two computers in my LAN. I downloaded the latest
> Windows Messenger (5.1) and installed it on both machines in my LAN. Does
> anybody have any suggestions?
>
> Rojo
>
>
>

[Rojo]

I can't get any help on this. Do any MVPs have any suggestions?

" > wrote in
message ...
>I HAVE THE SAME PROBLEM. IT DOES NOT WORK EVER. NOT ONCE. IT JUST
>HANGS
> AND HANGS AND HANGS PLEASE LE ME KNOW IF YOUR PROBLEM GETS RESOLVED
>
> "Rojo" wrote:
>
>> No matter what I do. I'm in an IM session and I click Application Sharing
>> or
>> Whiteboard and then the other party accepts. If I'm lucky enough to get
>> the
>> Sharing dialog box, every setting is unavailable, and the top says "Not
>> in a
>> call." But I am in a call. I opened ports on my router, but I can't even
>> use
>> these features between the two computers in my LAN. I downloaded the
>> latest
>> Windows Messenger (5.1) and installed it on both machines in my LAN. Does
>> anybody have any suggestions?
>>
>> Rojo
>>
>>
>>

[Nick_Q]

Not sure yet if I have the same problem as I am a newcomer to Messenger.

I dont seem to be able to set up application sharing, either initiating a
request or accepting one.

I was using 4.7, now upgraded to 5.1 and I still could have issues with the
set up of Norton IS which is my next investigation. I have read some info on
firewall set up but not clear as yet...

Interestingly i also connect to the internet via a wireless router...

text chat works fine, voice connect works fine, Application sharing does not
and I am not sure about remote assistance.

Any adivce as to where to start?
--
Regards,

Nick


"Rojo" wrote:

> I can't get any help on this. Do any MVPs have any suggestions?
>
> " > wrote in
> message ...
> >I HAVE THE SAME PROBLEM. IT DOES NOT WORK EVER. NOT ONCE. IT JUST
> >HANGS
> > AND HANGS AND HANGS PLEASE LE ME KNOW IF YOUR PROBLEM GETS RESOLVED
> >
> > "Rojo" wrote:
> >
> >> No matter what I do. I'm in an IM session and I click Application Sharing
> >> or
> >> Whiteboard and then the other party accepts. If I'm lucky enough to get
> >> the
> >> Sharing dialog box, every setting is unavailable, and the top says "Not
> >> in a
> >> call." But I am in a call. I opened ports on my router, but I can't even
> >> use
> >> these features between the two computers in my LAN. I downloaded the
> >> latest
> >> Windows Messenger (5.1) and installed it on both machines in my LAN. Does
> >> anybody have any suggestions?
> >>
> >> Rojo
> >>
> >>
> >>
>
>
>

[MB]

I too am experiencing this issue. Remote Assistance DOES work but
Application Sharing and Whiteboard do not. D-Link DI-614+ Wireless Router.
It used to work but think it may have quit working after XP SP2 install.
Just installed the latest firmware upgrade on D-link router but that didn't
resolve the problem.

"Nick_Q" wrote:

> Not sure yet if I have the same problem as I am a newcomer to Messenger.
>
> I dont seem to be able to set up application sharing, either initiating a
> request or accepting one.
>
> I was using 4.7, now upgraded to 5.1 and I still could have issues with the
> set up of Norton IS which is my next investigation. I have read some info on
> firewall set up but not clear as yet...
>
> Interestingly i also connect to the internet via a wireless router...
>
> text chat works fine, voice connect works fine, Application sharing does not
> and I am not sure about remote assistance.
>
> Any adivce as to where to start?
> --
> Regards,
>
> Nick
>
>
> "Rojo" wrote:
>
> > I can't get any help on this. Do any MVPs have any suggestions?
> >
> > " > wrote in
> > message ...
> > >I HAVE THE SAME PROBLEM. IT DOES NOT WORK EVER. NOT ONCE. IT JUST
> > >HANGS
> > > AND HANGS AND HANGS PLEASE LE ME KNOW IF YOUR PROBLEM GETS RESOLVED
> > >
> > > "Rojo" wrote:
> > >
> > >> No matter what I do. I'm in an IM session and I click Application Sharing
> > >> or
> > >> Whiteboard and then the other party accepts. If I'm lucky enough to get
> > >> the
> > >> Sharing dialog box, every setting is unavailable, and the top says "Not
> > >> in a
> > >> call." But I am in a call. I opened ports on my router, but I can't even
> > >> use
> > >> these features between the two computers in my LAN. I downloaded the
> > >> latest
> > >> Windows Messenger (5.1) and installed it on both machines in my LAN. Does
> > >> anybody have any suggestions?
> > >>
> > >> Rojo
> > >>
> > >>
> > >>
> >
> >
> >

[jlm]

Same problem here. I can receive and accept an invitation for application
sharing but it doesn't reach the other party. When I try it on my LAN
between two computers same problem - doesn't matter which one initiates the
sharing.

I have Linksys BEFSX41 firewall router and McAfee firewall 7.0.

Text works fine.

Glad to know I'm not alone....

"MB" wrote:

> I too am experiencing this issue. Remote Assistance DOES work but
> Application Sharing and Whiteboard do not. D-Link DI-614+ Wireless Router.
> It used to work but think it may have quit working after XP SP2 install.
> Just installed the latest firmware upgrade on D-link router but that didn't
> resolve the problem.
>
> "Nick_Q" wrote:
>
> > Not sure yet if I have the same problem as I am a newcomer to Messenger.
> >
> > I dont seem to be able to set up application sharing, either initiating a
> > request or accepting one.
> >
> > I was using 4.7, now upgraded to 5.1 and I still could have issues with the
> > set up of Norton IS which is my next investigation. I have read some info on
> > firewall set up but not clear as yet...
> >
> > Interestingly i also connect to the internet via a wireless router...
> >
> > text chat works fine, voice connect works fine, Application sharing does not
> > and I am not sure about remote assistance.
> >
> > Any adivce as to where to start?
> > --
> > Regards,
> >
> > Nick
> >
> >
> > "Rojo" wrote:
> >
> > > I can't get any help on this. Do any MVPs have any suggestions?
> > >
> > > " > wrote in
> > > message ...
> > > >I HAVE THE SAME PROBLEM. IT DOES NOT WORK EVER. NOT ONCE. IT JUST
> > > >HANGS
> > > > AND HANGS AND HANGS PLEASE LE ME KNOW IF YOUR PROBLEM GETS RESOLVED
> > > >
> > > > "Rojo" wrote:
> > > >
> > > >> No matter what I do. I'm in an IM session and I click Application Sharing
> > > >> or
> > > >> Whiteboard and then the other party accepts. If I'm lucky enough to get
> > > >> the
> > > >> Sharing dialog box, every setting is unavailable, and the top says "Not
> > > >> in a
> > > >> call." But I am in a call. I opened ports on my router, but I can't even
> > > >> use
> > > >> these features between the two computers in my LAN. I downloaded the
> > > >> latest
> > > >> Windows Messenger (5.1) and installed it on both machines in my LAN. Does
> > > >> anybody have any suggestions?
> > > >>
> > > >> Rojo
> > > >>
> > > >>
> > > >>
> > >
> > >
> > >

[Sheldon S]

Add me to your list as well, tried to tweak every setting I know but no
success.
Unable to find solution, lots of people looking for answers but nothing
yet....

"jlm" wrote:

> Same problem here. I can receive and accept an invitation for application
> sharing but it doesn't reach the other party. When I try it on my LAN
> between two computers same problem - doesn't matter which one initiates the
> sharing.
>
> I have Linksys BEFSX41 firewall router and McAfee firewall 7.0.
>
> Text works fine.
>
> Glad to know I'm not alone....
>
> "MB" wrote:
>
> > I too am experiencing this issue. Remote Assistance DOES work but
> > Application Sharing and Whiteboard do not. D-Link DI-614+ Wireless Router.
> > It used to work but think it may have quit working after XP SP2 install.
> > Just installed the latest firmware upgrade on D-link router but that didn't
> > resolve the problem.
> >
> > "Nick_Q" wrote:
> >
> > > Not sure yet if I have the same problem as I am a newcomer to Messenger.
> > >
> > > I dont seem to be able to set up application sharing, either initiating a
> > > request or accepting one.
> > >
> > > I was using 4.7, now upgraded to 5.1 and I still could have issues with the
> > > set up of Norton IS which is my next investigation. I have read some info on
> > > firewall set up but not clear as yet...
> > >
> > > Interestingly i also connect to the internet via a wireless router...
> > >
> > > text chat works fine, voice connect works fine, Application sharing does not
> > > and I am not sure about remote assistance.
> > >
> > > Any adivce as to where to start?
> > > --
> > > Regards,
> > >
> > > Nick
> > >
> > >
> > > "Rojo" wrote:
> > >
> > > > I can't get any help on this. Do any MVPs have any suggestions?
> > > >
> > > > " > wrote in
> > > > message ...
> > > > >I HAVE THE SAME PROBLEM. IT DOES NOT WORK EVER. NOT ONCE. IT JUST
> > > > >HANGS
> > > > > AND HANGS AND HANGS PLEASE LE ME KNOW IF YOUR PROBLEM GETS RESOLVED
> > > > >
> > > > > "Rojo" wrote:
> > > > >
> > > > >> No matter what I do. I'm in an IM session and I click Application Sharing
> > > > >> or
> > > > >> Whiteboard and then the other party accepts. If I'm lucky enough to get
> > > > >> the
> > > > >> Sharing dialog box, every setting is unavailable, and the top says "Not
> > > > >> in a
> > > > >> call." But I am in a call. I opened ports on my router, but I can't even
> > > > >> use
> > > > >> these features between the two computers in my LAN. I downloaded the
> > > > >> latest
> > > > >> Windows Messenger (5.1) and installed it on both machines in my LAN. Does
> > > > >> anybody have any suggestions?
> > > > >>
> > > > >> Rojo
> > > > >>
> > > > >>
> > > > >>
> > > >
> > > >
> > > >

[canopus56@yahoo.com]

Me, too, accept as to file sharing. See my recent query post on
"firewalls."

[AndyPopely]

I had that problem with a contact who was behind a hardware firewall. To
correct the problem the person behind the firewall had to do these 2 things.
1) Go to ControlPanel -> Administrative Tools -> Services and start the
"Universal Plug and Play Device Host" service
2) Go to the ControlPanel -> Windows Firewall and tick the box against "UPNP
Framework" in the Exceptions tab
"Rojo" wrote:

> No matter what I do. I'm in an IM session and I click Application Sharing or
> Whiteboard and then the other party accepts. If I'm lucky enough to get the
> Sharing dialog box, every setting is unavailable, and the top says "Not in a
> call." But I am in a call. I opened ports on my router, but I can't even use
> these features between the two computers in my LAN. I downloaded the latest
> Windows Messenger (5.1) and installed it on both machines in my LAN. Does
> anybody have any suggestions?
>
> Rojo
>
>
>