IDE ATA/ATAPI controller- why 2 primary and 2 secondary dual channels show up ?

[- Bobb -]

Still tweaking my PC reinstall and I was checking DMA / PIO mode for my
CD/DVD's. I noticed - under IDE ATA/ATAPI controllers, I see 2 primary
IDE channels ( each with primary/secondary device ) , 2 secondary
(ditto) and 2 Dual channel. When

I have dual channel IDE with 2 devices per channel for max of 4 devices
I checked Adv Settings for each of the primary and secondaries they each
have Device 0 and Dev 1.
Since I only have 2 channels with 2 devices each, ( 1 primary and 1
secondary) , why am I seeing :
2 primaries listed with 2 devices each = 4 and 2 secondaries with 2 each
= 4. I can only have 4 not 8 - what's going on ?

Bobb

PS I just moved my OE stuff to a common drive so can access it from
either OS - this is nice. I wrote this from new XP install and sending
from the old ( I rebooted to the old install to check dev mgr here too
before sending along)

[Kerry Brown]

- Bobb - wrote:
> Still tweaking my PC reinstall and I was checking DMA / PIO mode for
> my CD/DVD's. I noticed - under IDE ATA/ATAPI controllers, I see 2
> primary IDE channels ( each with primary/secondary device ) , 2
> secondary (ditto) and 2 Dual channel. When
>
> I have dual channel IDE with 2 devices per channel for max of 4
> devices I checked Adv Settings for each of the primary and
> secondaries they each have Device 0 and Dev 1.
> Since I only have 2 channels with 2 devices each, ( 1 primary and 1
> secondary) , why am I seeing :
> 2 primaries listed with 2 devices each = 4 and 2 secondaries with 2
> each = 4. I can only have 4 not 8 - what's going on ?
>
> Bobb
>
> PS I just moved my OE stuff to a common drive so can access it from
> either OS - this is nice. I wrote this from new XP install and sending
> from the old ( I rebooted to the old install to check dev mgr here
> too before sending along)

Does your motherboard have SATA controllers? Some SATA controllers show up
like this.

--
Kerry
MS-MVP Windows - Shell/User

[- Bobb -]

Aha ! That would do it . My only HDD is a SATA.

Thanks
Bobb

"Kerry Brown" *a*m> wrote in message
...
>- Bobb - wrote:
>> Still tweaking my PC reinstall and I was checking DMA / PIO mode for
>> my CD/DVD's. I noticed - under IDE ATA/ATAPI controllers, I see 2
>> primary IDE channels ( each with primary/secondary device ) , 2
>> secondary (ditto) and 2 Dual channel. When
>>
>> I have dual channel IDE with 2 devices per channel for max of 4
>> devices I checked Adv Settings for each of the primary and
>> secondaries they each have Device 0 and Dev 1.
>> Since I only have 2 channels with 2 devices each, ( 1 primary and 1
>> secondary) , why am I seeing :
>> 2 primaries listed with 2 devices each = 4 and 2 secondaries with 2
>> each = 4. I can only have 4 not 8 - what's going on ?
>>
>> Bobb
>>
>> PS I just moved my OE stuff to a common drive so can access it from
>> either OS - this is nice. I wrote this from new XP install and
>> sending
>> from the old ( I rebooted to the old install to check dev mgr here
>> too before sending along)
>
> Does your motherboard have SATA controllers? Some SATA controllers
> show up like this.
>
> --
> Kerry
> MS-MVP Windows - Shell/User
>