PDA

View Full Version : Remote assistance only partly working


ejhines
July 9th 06, 03:00 PM
Hi gang,

environment is:

My brother in Florida has a wireless network
I have a wireless network in Indiana

While in Florida visiting, i installed MSN messenger 7.5 on my brothers
computer and mine, and used "remote assistance" without problems at his
house.

After returning to Indiana, I installed MSN messenger 7.5 on my wife's
computer and can use it in the house without problems on out two machines.


*** PROBLEM ****
When I attempt to start remote assistance over the internet to my brother.
- he requests remote assistance
- I accept
- it says it is starting, and then:
- "Remote Assistance connection disconnected, Please try again" and
we can't connect.


Thanks for any help.

Estel J Hines

ejhines
July 9th 06, 03:33 PM
Additional information:

I have installed msn messenger 7.5 on a couple other machines in this area,
and have the exact same results .

it is clear that if I am behind the router, it works, but if I want to go
thru the internet via the router on either end, it will not work.


"ejhines" > wrote in message
. ..
> Hi gang,
>
> environment is:
>
> My brother in Florida has a wireless network
> I have a wireless network in Indiana
>
> While in Florida visiting, i installed MSN messenger 7.5 on my brothers
> computer and mine, and used "remote assistance" without problems at his
> house.
>
> After returning to Indiana, I installed MSN messenger 7.5 on my wife's
> computer and can use it in the house without problems on out two machines.
>
>
> *** PROBLEM ****
> When I attempt to start remote assistance over the internet to my brother.
> - he requests remote assistance
> - I accept
> - it says it is starting, and then:
> - "Remote Assistance connection disconnected, Please try again" and
> we can't connect.
>
>
> Thanks for any help.
>
> Estel J Hines
>

ejhines
July 9th 06, 04:55 PM
OK, I now have over 15 hours invested in trying the MSN messenger 7.5
approach, so I tried the www.logmein.com site and downloaded their free
version.

It ran, right off the bat, and I tested it on my wife's computer, no
problem. I still have to get it installed on a couple of computers so that I
prove to myself that I can access them thru my/their routers over the
internet. I'll keep you posted.

Estel J Hines
"ejhines" > wrote in message
. ..
> Hi gang,
>
> environment is:
>
> My brother in Florida has a wireless network
> I have a wireless network in Indiana
>
> While in Florida visiting, i installed MSN messenger 7.5 on my brothers
> computer and mine, and used "remote assistance" without problems at his
> house.
>
> After returning to Indiana, I installed MSN messenger 7.5 on my wife's
> computer and can use it in the house without problems on out two machines.
>
>
> *** PROBLEM ****
> When I attempt to start remote assistance over the internet to my brother.
> - he requests remote assistance
> - I accept
> - it says it is starting, and then:
> - "Remote Assistance connection disconnected, Please try again" and
> we can't connect.
>
>
> Thanks for any help.
>
> Estel J Hines
>

Darrell
July 9th 06, 04:56 PM
Hi,

One of you will need to enable UPnP on your router and it should work.

Darrell

"ejhines" wrote:

> Additional information:
>
> I have installed msn messenger 7.5 on a couple other machines in this area,
> and have the exact same results .
>
> it is clear that if I am behind the router, it works, but if I want to go
> thru the internet via the router on either end, it will not work.
>
>
> "ejhines" > wrote in message
> . ..
> > Hi gang,
> >
> > environment is:
> >
> > My brother in Florida has a wireless network
> > I have a wireless network in Indiana
> >
> > While in Florida visiting, i installed MSN messenger 7.5 on my brothers
> > computer and mine, and used "remote assistance" without problems at his
> > house.
> >
> > After returning to Indiana, I installed MSN messenger 7.5 on my wife's
> > computer and can use it in the house without problems on out two machines.
> >
> >
> > *** PROBLEM ****
> > When I attempt to start remote assistance over the internet to my brother.
> > - he requests remote assistance
> > - I accept
> > - it says it is starting, and then:
> > - "Remote Assistance connection disconnected, Please try again" and
> > we can't connect.
> >
> >
> > Thanks for any help.
> >
> > Estel J Hines
> >
>
>
>

ejhines
July 9th 06, 08:38 PM
Thanks for responding Darrell,

I just checked my Router, and uPnP is enabled

"Darrell" > wrote in message
...
> Hi,
>
> One of you will need to enable UPnP on your router and it should work.
>
> Darrell
>
> "ejhines" wrote:
>
>> Additional information:
>>
>> I have installed msn messenger 7.5 on a couple other machines in this
>> area,
>> and have the exact same results .
>>
>> it is clear that if I am behind the router, it works, but if I want to go
>> thru the internet via the router on either end, it will not work.
>>
>>
>> "ejhines" > wrote in message
>> . ..
>> > Hi gang,
>> >
>> > environment is:
>> >
>> > My brother in Florida has a wireless network
>> > I have a wireless network in Indiana
>> >
>> > While in Florida visiting, i installed MSN messenger 7.5 on my brothers
>> > computer and mine, and used "remote assistance" without problems at his
>> > house.
>> >
>> > After returning to Indiana, I installed MSN messenger 7.5 on my wife's
>> > computer and can use it in the house without problems on out two
>> > machines.
>> >
>> >
>> > *** PROBLEM ****
>> > When I attempt to start remote assistance over the internet to my
>> > brother.
>> > - he requests remote assistance
>> > - I accept
>> > - it says it is starting, and then:
>> > - "Remote Assistance connection disconnected, Please try again"
>> > and
>> > we can't connect.
>> >
>> >
>> > Thanks for any help.
>> >
>> > Estel J Hines
>> >
>>
>>
>>

Darrell
July 9th 06, 09:26 PM
Go to Start/Run. "Type in services.msc" without the quotes. Look for "SSDP
Discovery Services" and "Universal Plug and Play Device Host". Make sure the
Status for both of these services is "Started" and the Startup Type is set to
"Automatic" on both systems. Also have your brother enable UPnP on his
router if it is not. Restart your systems then try a Remote Assistance
session.

"ejhines" wrote:

> Thanks for responding Darrell,
>
> I just checked my Router, and uPnP is enabled
>
> "Darrell" > wrote in message
> ...
> > Hi,
> >
> > One of you will need to enable UPnP on your router and it should work.
> >
> > Darrell
> >
> > "ejhines" wrote:
> >
> >> Additional information:
> >>
> >> I have installed msn messenger 7.5 on a couple other machines in this
> >> area,
> >> and have the exact same results .
> >>
> >> it is clear that if I am behind the router, it works, but if I want to go
> >> thru the internet via the router on either end, it will not work.
> >>
> >>
> >> "ejhines" > wrote in message
> >> . ..
> >> > Hi gang,
> >> >
> >> > environment is:
> >> >
> >> > My brother in Florida has a wireless network
> >> > I have a wireless network in Indiana
> >> >
> >> > While in Florida visiting, i installed MSN messenger 7.5 on my brothers
> >> > computer and mine, and used "remote assistance" without problems at his
> >> > house.
> >> >
> >> > After returning to Indiana, I installed MSN messenger 7.5 on my wife's
> >> > computer and can use it in the house without problems on out two
> >> > machines.
> >> >
> >> >
> >> > *** PROBLEM ****
> >> > When I attempt to start remote assistance over the internet to my
> >> > brother.
> >> > - he requests remote assistance
> >> > - I accept
> >> > - it says it is starting, and then:
> >> > - "Remote Assistance connection disconnected, Please try again"
> >> > and
> >> > we can't connect.
> >> >
> >> >
> >> > Thanks for any help.
> >> >
> >> > Estel J Hines
> >> >
> >>
> >>
> >>
>
>
>

Dave
July 11th 06, 01:51 AM
Thanks for this post Darrell. I was having the exact same issues as ejhines
and your services.msc post resolved it. Thanks!!!

"Darrell" wrote:

> Go to Start/Run. "Type in services.msc" without the quotes. Look for "SSDP
> Discovery Services" and "Universal Plug and Play Device Host". Make sure the
> Status for both of these services is "Started" and the Startup Type is set to
> "Automatic" on both systems. Also have your brother enable UPnP on his
> router if it is not. Restart your systems then try a Remote Assistance
> session.
>
> "ejhines" wrote:
>
> > Thanks for responding Darrell,
> >
> > I just checked my Router, and uPnP is enabled
> >
> > "Darrell" > wrote in message
> > ...
> > > Hi,
> > >
> > > One of you will need to enable UPnP on your router and it should work.
> > >
> > > Darrell
> > >
> > > "ejhines" wrote:
> > >
> > >> Additional information:
> > >>
> > >> I have installed msn messenger 7.5 on a couple other machines in this
> > >> area,
> > >> and have the exact same results .
> > >>
> > >> it is clear that if I am behind the router, it works, but if I want to go
> > >> thru the internet via the router on either end, it will not work.
> > >>
> > >>
> > >> "ejhines" > wrote in message
> > >> . ..
> > >> > Hi gang,
> > >> >
> > >> > environment is:
> > >> >
> > >> > My brother in Florida has a wireless network
> > >> > I have a wireless network in Indiana
> > >> >
> > >> > While in Florida visiting, i installed MSN messenger 7.5 on my brothers
> > >> > computer and mine, and used "remote assistance" without problems at his
> > >> > house.
> > >> >
> > >> > After returning to Indiana, I installed MSN messenger 7.5 on my wife's
> > >> > computer and can use it in the house without problems on out two
> > >> > machines.
> > >> >
> > >> >
> > >> > *** PROBLEM ****
> > >> > When I attempt to start remote assistance over the internet to my
> > >> > brother.
> > >> > - he requests remote assistance
> > >> > - I accept
> > >> > - it says it is starting, and then:
> > >> > - "Remote Assistance connection disconnected, Please try again"
> > >> > and
> > >> > we can't connect.
> > >> >
> > >> >
> > >> > Thanks for any help.
> > >> >
> > >> > Estel J Hines
> > >> >
> > >>
> > >>
> > >>
> >
> >
> >

Google