Can't identify "Other Device" in Device Manager

[Fruit2O]

My physical drive has two partitions and both use the identical version
of WinXP Pro. However, one of the drives keeps telling me that I have
new hardware (USB) but it cannot find the driver. So, for now, I
disabled it. But I would really like to know what this device is. Is
there a way to find out?

[dean-dean]

Try this KB Article:

How to use Registry Editor to identify an unknown PCI device ->

http://support.microsoft.com/kb/298837

(Contrary to the article's "Apply's to" section, the information is
legitimate for XP, as well.)

Dean

"Fruit2O" > wrote in message
...
> My physical drive has two partitions and both use the identical version
> of WinXP Pro. However, one of the drives keeps telling me that I have
> new hardware (USB) but it cannot find the driver. So, for now, I
> disabled it. But I would really like to know what this device is. Is
> there a way to find out?

[Fruit2O]

On Fri, 17 Nov 2006 19:28:30 -0600, "dean-dean"
> wrote:

>Try this KB Article:
>
>How to use Registry Editor to identify an unknown PCI device ->
>
>http://support.microsoft.com/kb/298837
>
>(Contrary to the article's "Apply's to" section, the information is
>legitimate for XP, as well.)
>
>Dean

But my unidentified device is USB.
>

[dean-dean]

Open Device Manager, and on Device Manager's menu click View, then click
"Devices by connection". Expand the trees. Usually USB's are under the PCI
Bus, and are therefore "PCI devices".

Dean

"Fruit2O" > wrote in message
...
> On Fri, 17 Nov 2006 19:28:30 -0600, "dean-dean"
> > wrote:
>
>>Try this KB Article:
>>
>>How to use Registry Editor to identify an unknown PCI device ->
>>
>>http://support.microsoft.com/kb/298837
>>
>>(Contrary to the article's "Apply's to" section, the information is
>>legitimate for XP, as well.)
>>
>>Dean
>
> But my unidentified device is USB.
>>

[Wesley Vogel]

<quote>
When a device driver for a device is not available, Device Manager displays
the device as Unknown Device, and places it in the Other devices branch.
This is very common with Universal Serial Bus (USB) and Institute of
Electrical and Electronics Engineering (IEEE) 1394 composite devices. Also,
a status of Error Code 1 or Error Code 10 may be displayed when you view the
properties of the device in Device Manager.

NOTE: Most USB and IEEE 1394 devices are designed to function properly
without additional device drivers, because they are configured by the
drivers included with Windows for these bus types. However, an additional
device driver is needed if the device does not fit the defined and supplied
Windows class drivers. If the bus cannot identify the device, it interprets
the device as a composite device and then reports it as such in Device
Manager.
<quote>
How to troubleshoot unknown devices that are listed in Device Manager in
Windows XP
http://support.microsoft.com/kb/314464

How to troubleshoot unknown devices that are listed in Device Manager in
Windows XP
http://support.microsoft.com/kb/314464

Unknown Devices
Unknown Devices helps you find what those unknown devices in Device Manager
really are.
http://www.halfdone.com/Development/UnknownDevices/

Unknown Devices
http://web.archive.org/web/20050205222855/www.halfdone.com/Development/UnknownDevices/

--
Hope this helps. Let us know.

Wes
MS-MVP Windows Shell/User

In ,
Fruit2O > hunted and pecked:
> On Fri, 17 Nov 2006 19:28:30 -0600, "dean-dean"
> > wrote:
>
>> Try this KB Article:
>>
>> How to use Registry Editor to identify an unknown PCI device ->
>>
>> http://support.microsoft.com/kb/298837
>>
>> (Contrary to the article's "Apply's to" section, the information is
>> legitimate for XP, as well.)
>>
>> Dean
>
> But my unidentified device is USB.

[Dean-Dean]

Here's another way to go at it:

1.Open Device Manager.

2.Open the properties for the device in question. Click the Details tab.
Make sure that "Device Instance Id" is selected in the drop-down menu on this
tab.

3.You will see a string like this one:

PCI\VEN_8086&DEV_2658&SUBSYS....

In this example, 8086 (after VEN_) is the Vendor ID and 2658 (after &DEV_)
is the Device ID.

4.Go to http://pcidatabase.com and type the appropriate numbers/letters into
Vendor Search and Device Search, using the Vendor ID and Device ID that you
just found. In the example above, it was "USB UHCI Controller #1", made by
the "Intel Corporation".

5.Refer to vendor's web site for appropriate drivers for device.

Hope this helps.
Dean

"Fruit2O" wrote:

> On Fri, 17 Nov 2006 19:28:30 -0600, "dean-dean"
> > wrote:
>
> >Try this KB Article:
> >
> >How to use Registry Editor to identify an unknown PCI device ->
> >
> >http://support.microsoft.com/kb/298837
> >
> >(Contrary to the article's "Apply's to" section, the information is
> >legitimate for XP, as well.)
> >
> >Dean
>
> But my unidentified device is USB.
> >
>

[Wesley Vogel]

General USB troubleshooting in Windows XP
http://support.microsoft.com/kb/310575

--
Hope this helps. Let us know.

Wes
MS-MVP Windows Shell/User

In ,
Wesley Vogel > hunted and pecked:
> <quote>
> When a device driver for a device is not available, Device Manager
> displays the device as Unknown Device, and places it in the Other devices
> branch. This is very common with Universal Serial Bus (USB) and Institute
> of Electrical and Electronics Engineering (IEEE) 1394 composite devices.
> Also, a status of Error Code 1 or Error Code 10 may be displayed when you
> view the properties of the device in Device Manager.
>
> NOTE: Most USB and IEEE 1394 devices are designed to function properly
> without additional device drivers, because they are configured by the
> drivers included with Windows for these bus types. However, an additional
> device driver is needed if the device does not fit the defined and
> supplied Windows class drivers. If the bus cannot identify the device, it
> interprets the device as a composite device and then reports it as such
> in Device Manager.
> <quote>
> How to troubleshoot unknown devices that are listed in Device Manager in
> Windows XP
> http://support.microsoft.com/kb/314464
>
> How to troubleshoot unknown devices that are listed in Device Manager in
> Windows XP
> http://support.microsoft.com/kb/314464
>
> Unknown Devices
> Unknown Devices helps you find what those unknown devices in Device
> Manager really are.
> http://www.halfdone.com/Development/UnknownDevices/
>
> Unknown Devices
>
http://web.archive.org/web/20050205222855/www.halfdone.com/Development/UnknownDevices/
>
> --
> Hope this helps. Let us know.
>
> Wes
> MS-MVP Windows Shell/User
>
> In ,
> Fruit2O > hunted and pecked:
>> On Fri, 17 Nov 2006 19:28:30 -0600, "dean-dean"
>> > wrote:
>>
>>> Try this KB Article:
>>>
>>> How to use Registry Editor to identify an unknown PCI device ->
>>>
>>> http://support.microsoft.com/kb/298837
>>>
>>> (Contrary to the article's "Apply's to" section, the information is
>>> legitimate for XP, as well.)
>>>
>>> Dean
>>
>> But my unidentified device is USB.