Stop: 0xC000026c {Fatal System Error}

[DL]

Winxp home sp2;
the rest of the stop being; status(0x00000000 ox00000000)

From looking at ms kb it appears this may be caused by corrupt user32.dll,
as I dont have access to the origonal Dell disks right now, can I copy this
dll from another winxp home sp2 installation.

Background sys crashed, last good etc didnt, all options resulted in
windows\system32\config\system may be corrupt msg
I created the 6 boot disks, used recovery consol to rename the 5 sys hives
and copied origonal from \repair
The sys now boots, but in the final process results in the latest err

Or is there anything else I can do, other than waiting for the Dell disks to
arrive?
Thanks

[philo]

"DL" <address@invalid> wrote in message
...
> Winxp home sp2;
> the rest of the stop being; status(0x00000000 ox00000000)
>
> From looking at ms kb it appears this may be caused by corrupt user32.dll,
> as I dont have access to the origonal Dell disks right now, can I copy
this
> dll from another winxp home sp2 installation.
>
> Background sys crashed, last good etc didnt, all options resulted in
> windows\system32\config\system may be corrupt msg
> I created the 6 boot disks, used recovery consol to rename the 5 sys hives
> and copied origonal from \repair
> The sys now boots, but in the final process results in the latest err
>

If you can get to safe mode by hitting F8 while booting

you could try a system restore

[DL]

Thanks, problem now diagnosed.
I found an winxp sp2 slipstreamed cd and was able, at last, to run chkdsk,
which reported unrecoverable errors.
Once I found the hd make, I ran the diagnostics which reported 'another
Maxtor bites the dust'
Thanks again


"philo" > wrote in message
...
>
> "DL" <address@invalid> wrote in message
> ...
> > Winxp home sp2;
> > the rest of the stop being; status(0x00000000 ox00000000)
> >
> > From looking at ms kb it appears this may be caused by corrupt
user32.dll,
> > as I dont have access to the origonal Dell disks right now, can I copy
> this
> > dll from another winxp home sp2 installation.
> >
> > Background sys crashed, last good etc didnt, all options resulted in
> > windows\system32\config\system may be corrupt msg
> > I created the 6 boot disks, used recovery consol to rename the 5 sys
hives
> > and copied origonal from \repair
> > The sys now boots, but in the final process results in the latest err
> >
>
> If you can get to safe mode by hitting F8 while booting
>
> you could try a system restore
>
>

[philo]

"DL" <address@invalid> wrote in message
...
> Thanks, problem now diagnosed.
> I found an winxp sp2 slipstreamed cd and was able, at last, to run chkdsk,
> which reported unrecoverable errors.
> Once I found the hd make, I ran the diagnostics which reported 'another
> Maxtor bites the dust'
> Thanks again
>
>

Well at least you figured out the problem!