MMC cannot open the file c:\windows\system32\compmgmt.msc

[jay]

When I attempt to "Manage" my computer, I get the error message:

MMC cannot open the file C:\WINDOWS\SYSTEM32\COMPMGMT.MSC
This may be because the file does not exist, is not an MMC console, or was
created by a later version of MMC. This may also be because you do not have
sufficient access rights to the file.

I get the same erro when I attempt to open the Event Viewer, Services, etc.
(basically anything in Administrative Tools).

So, I clicked START-->RUN and keyed in MMC and pressed ENTER.
I added the necessary snap-ins and attempted to save the MMC console as
"console1" and put it in:
DOCS&SETTINGS\ALLUSERS\STARTMENU\PROGRAMS\ADMINISTRATIV E-TOOLS and I get an
error message stating:
"MMC cannot save the console"

I am logged into the system as Local Administrator with full security
privileges to the entire machine.

I found Knowledge Base article 326574, and have verified that "C:\windows;
c:\windows\system32; c:\windows\system32\wbem" are all contained in my PATH.

What could the problem be? Does it appear that I need to reinstall the O/S?

[Wesley Vogel]

Error Message "Snap-in Failed to Initialize" When You Use Microsoft
Management Console
http://support.microsoft.com/kb/297064

"Snap-in Failed to Initialize" Error Message When You Open Microsoft
Management Console
http://support.microsoft.com/kb/826282

You receive a "Cannot open <Snap-in Name>" error message when you try to
start MMC on a Windows XP-based computer
http://support.microsoft.com/kb/326574

Device Manager Snap-in fails to initialize
http://windowsxp.mvps.org/devmgr.htm

"Action Canceled" error while opening Device Manager
http://windowsxp.mvps.org/dmocx.htm

Make sure that %SystemRoot%\System32\WBEM is in the PATH.

Note: %SystemRoot% is usually the same thing as C:\WINDOWS

I.e. %SystemRoot%\System32 = C:\WINDOWS\system32

Open a command prompt...
Start | Run | Type: cmd | Click OK |
When the command prompt opens, type: path and then hit your Enter key.

It should look something like this...

PATH=C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\Sys tem32\Wbem

There may be more items, but make sure that you see WINDOWS\System32\Wbem

This behavior can also occur if your PATH environment variable ends with \

To resolve the problem
1. Right-click My Computer and press Properties.
2. Select the Advanced tab.
3. Press the Environment Variables button.
4. Double-click PATH in the System variables area.
5. Remove the \ from the end of the string.
6. Press OK and OK.

--
Hope this helps. Let us know.

Wes
MS-MVP Windows Shell/User

In ,
Jay > hunted and pecked:
> When I attempt to "Manage" my computer, I get the error message:
>
> MMC cannot open the file C:\WINDOWS\SYSTEM32\COMPMGMT.MSC
> This may be because the file does not exist, is not an MMC console, or was
> created by a later version of MMC. This may also be because you do not
> have sufficient access rights to the file.
>
> I get the same erro when I attempt to open the Event Viewer, Services,
> etc. (basically anything in Administrative Tools).
>
> So, I clicked START-->RUN and keyed in MMC and pressed ENTER.
> I added the necessary snap-ins and attempted to save the MMC console as
> "console1" and put it in:
> DOCS&SETTINGS\ALLUSERS\STARTMENU\PROGRAMS\ADMINISTRATIV E-TOOLS and I get
> an error message stating:
> "MMC cannot save the console"
>
> I am logged into the system as Local Administrator with full security
> privileges to the entire machine.
>
> I found Knowledge Base article 326574, and have verified that "C:\windows;
> c:\windows\system32; c:\windows\system32\wbem" are all contained in my
> PATH.
>
> What could the problem be? Does it appear that I need to reinstall the
> O/S?

[jay]

These solutions did NOT resolve the problem.
As I stated in my original post, I already reviewed and tried KB326574 and
confirmed that the correct PATH variables are in place.

Any other suggestions?

"Wesley Vogel" wrote:

> Error Message "Snap-in Failed to Initialize" When You Use Microsoft
> Management Console
> http://support.microsoft.com/kb/297064
>
> "Snap-in Failed to Initialize" Error Message When You Open Microsoft
> Management Console
> http://support.microsoft.com/kb/826282
>
> You receive a "Cannot open <Snap-in Name>" error message when you try to
> start MMC on a Windows XP-based computer
> http://support.microsoft.com/kb/326574
>
> Device Manager Snap-in fails to initialize
> http://windowsxp.mvps.org/devmgr.htm
>
> "Action Canceled" error while opening Device Manager
> http://windowsxp.mvps.org/dmocx.htm
>
> Make sure that %SystemRoot%\System32\WBEM is in the PATH.
>
> Note: %SystemRoot% is usually the same thing as C:\WINDOWS
>
> I.e. %SystemRoot%\System32 = C:\WINDOWS\system32
>
> Open a command prompt...
> Start | Run | Type: cmd | Click OK |
> When the command prompt opens, type: path and then hit your Enter key.
>
> It should look something like this...
>
> PATH=C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\Sys tem32\Wbem
>
> There may be more items, but make sure that you see WINDOWS\System32\Wbem
>
> This behavior can also occur if your PATH environment variable ends with \
>
> To resolve the problem
> 1. Right-click My Computer and press Properties.
> 2. Select the Advanced tab.
> 3. Press the Environment Variables button.
> 4. Double-click PATH in the System variables area.
> 5. Remove the \ from the end of the string.
> 6. Press OK and OK.
>
> --
> Hope this helps. Let us know.
>
> Wes
> MS-MVP Windows Shell/User
>
> In ,
> Jay > hunted and pecked:
> > When I attempt to "Manage" my computer, I get the error message:
> >
> > MMC cannot open the file C:\WINDOWS\SYSTEM32\COMPMGMT.MSC
> > This may be because the file does not exist, is not an MMC console, or was
> > created by a later version of MMC. This may also be because you do not
> > have sufficient access rights to the file.
> >
> > I get the same erro when I attempt to open the Event Viewer, Services,
> > etc. (basically anything in Administrative Tools).
> >
> > So, I clicked START-->RUN and keyed in MMC and pressed ENTER.
> > I added the necessary snap-ins and attempted to save the MMC console as
> > "console1" and put it in:
> > DOCS&SETTINGS\ALLUSERS\STARTMENU\PROGRAMS\ADMINISTRATIV E-TOOLS and I get
> > an error message stating:
> > "MMC cannot save the console"
> >
> > I am logged into the system as Local Administrator with full security
> > privileges to the entire machine.
> >
> > I found Knowledge Base article 326574, and have verified that "C:\windows;
> > c:\windows\system32; c:\windows\system32\wbem" are all contained in my
> > PATH.
> >
> > What could the problem be? Does it appear that I need to reinstall the
> > O/S?
>
>

[Wesley Vogel]

Is there a slash (\) in the environement variables?

--
Hope this helps. Let us know.

Wes
MS-MVP Windows Shell/User

In ,
Jay > hunted and pecked:
> These solutions did NOT resolve the problem.
> As I stated in my original post, I already reviewed and tried KB326574 and
> confirmed that the correct PATH variables are in place.
>
> Any other suggestions?
>
> "Wesley Vogel" wrote:
>
>> Error Message "Snap-in Failed to Initialize" When You Use Microsoft
>> Management Console
>> http://support.microsoft.com/kb/297064
>>
>> "Snap-in Failed to Initialize" Error Message When You Open Microsoft
>> Management Console
>> http://support.microsoft.com/kb/826282
>>
>> You receive a "Cannot open <Snap-in Name>" error message when you try to
>> start MMC on a Windows XP-based computer
>> http://support.microsoft.com/kb/326574
>>
>> Device Manager Snap-in fails to initialize
>> http://windowsxp.mvps.org/devmgr.htm
>>
>> "Action Canceled" error while opening Device Manager
>> http://windowsxp.mvps.org/dmocx.htm
>>
>> Make sure that %SystemRoot%\System32\WBEM is in the PATH.
>>
>> Note: %SystemRoot% is usually the same thing as C:\WINDOWS
>>
>> I.e. %SystemRoot%\System32 = C:\WINDOWS\system32
>>
>> Open a command prompt...
>> Start | Run | Type: cmd | Click OK |
>> When the command prompt opens, type: path and then hit your Enter key.
>>
>> It should look something like this...
>>
>> PATH=C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\Sys tem32\Wbem
>>
>> There may be more items, but make sure that you see WINDOWS\System32\Wbem
>>
>> This behavior can also occur if your PATH environment variable ends with
>> \
>>
>> To resolve the problem
>> 1. Right-click My Computer and press Properties.
>> 2. Select the Advanced tab.
>> 3. Press the Environment Variables button.
>> 4. Double-click PATH in the System variables area.
>> 5. Remove the \ from the end of the string.
>> 6. Press OK and OK.
>>
>> --
>> Hope this helps. Let us know.
>>
>> Wes
>> MS-MVP Windows Shell/User
>>
>> In ,
>> Jay > hunted and pecked:
>>> When I attempt to "Manage" my computer, I get the error message:
>>>
>>> MMC cannot open the file C:\WINDOWS\SYSTEM32\COMPMGMT.MSC
>>> This may be because the file does not exist, is not an MMC console, or
>>> was created by a later version of MMC. This may also be because you do
>>> not have sufficient access rights to the file.
>>>
>>> I get the same erro when I attempt to open the Event Viewer, Services,
>>> etc. (basically anything in Administrative Tools).
>>>
>>> So, I clicked START-->RUN and keyed in MMC and pressed ENTER.
>>> I added the necessary snap-ins and attempted to save the MMC console as
>>> "console1" and put it in:
>>> DOCS&SETTINGS\ALLUSERS\STARTMENU\PROGRAMS\ADMINISTRATIV E-TOOLS and I get
>>> an error message stating:
>>> "MMC cannot save the console"
>>>
>>> I am logged into the system as Local Administrator with full security
>>> privileges to the entire machine.
>>>
>>> I found Knowledge Base article 326574, and have verified that
>>> "C:\windows; c:\windows\system32; c:\windows\system32\wbem" are all
>>> contained in my PATH.
>>>
>>> What could the problem be? Does it appear that I need to reinstall the
>>> O/S?

[nass]

Hi Jay,
What version of MSXML you have installed now on your server?.
Read this article:
http://support.microsoft.com/kb/816598

Open the Run Command and type in these DLLs (you may need just one but try
both if the first didn't help):
regsvr32 msxml4.dll Click [OK] and Reboot the machine Note if you have
MSXML3 replace the number and re-register the DLL.
regsvr32 /u msxml4.dll
HTH.
Let us know.
Regards,
nass

"Jay" wrote:

> These solutions did NOT resolve the problem.
> As I stated in my original post, I already reviewed and tried KB326574 and
> confirmed that the correct PATH variables are in place.
>
> Any other suggestions?
>
> "Wesley Vogel" wrote:
>
> > Error Message "Snap-in Failed to Initialize" When You Use Microsoft
> > Management Console
> > http://support.microsoft.com/kb/297064
> >
> > "Snap-in Failed to Initialize" Error Message When You Open Microsoft
> > Management Console
> > http://support.microsoft.com/kb/826282
> >
> > You receive a "Cannot open <Snap-in Name>" error message when you try to
> > start MMC on a Windows XP-based computer
> > http://support.microsoft.com/kb/326574
> >
> > Device Manager Snap-in fails to initialize
> > http://windowsxp.mvps.org/devmgr.htm
> >
> > "Action Canceled" error while opening Device Manager
> > http://windowsxp.mvps.org/dmocx.htm
> >
> > Make sure that %SystemRoot%\System32\WBEM is in the PATH.
> >
> > Note: %SystemRoot% is usually the same thing as C:\WINDOWS
> >
> > I.e. %SystemRoot%\System32 = C:\WINDOWS\system32
> >
> > Open a command prompt...
> > Start | Run | Type: cmd | Click OK |
> > When the command prompt opens, type: path and then hit your Enter key.
> >
> > It should look something like this...
> >
> > PATH=C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\Sys tem32\Wbem
> >
> > There may be more items, but make sure that you see WINDOWS\System32\Wbem
> >
> > This behavior can also occur if your PATH environment variable ends with \
> >
> > To resolve the problem
> > 1. Right-click My Computer and press Properties.
> > 2. Select the Advanced tab.
> > 3. Press the Environment Variables button.
> > 4. Double-click PATH in the System variables area.
> > 5. Remove the \ from the end of the string.
> > 6. Press OK and OK.
> >
> > --
> > Hope this helps. Let us know.
> >
> > Wes
> > MS-MVP Windows Shell/User
> >
> > In ,
> > Jay > hunted and pecked:
> > > When I attempt to "Manage" my computer, I get the error message:
> > >
> > > MMC cannot open the file C:\WINDOWS\SYSTEM32\COMPMGMT.MSC
> > > This may be because the file does not exist, is not an MMC console, or was
> > > created by a later version of MMC. This may also be because you do not
> > > have sufficient access rights to the file.
> > >
> > > I get the same erro when I attempt to open the Event Viewer, Services,
> > > etc. (basically anything in Administrative Tools).
> > >
> > > So, I clicked START-->RUN and keyed in MMC and pressed ENTER.
> > > I added the necessary snap-ins and attempted to save the MMC console as
> > > "console1" and put it in:
> > > DOCS&SETTINGS\ALLUSERS\STARTMENU\PROGRAMS\ADMINISTRATIV E-TOOLS and I get
> > > an error message stating:
> > > "MMC cannot save the console"
> > >
> > > I am logged into the system as Local Administrator with full security
> > > privileges to the entire machine.
> > >
> > > I found Knowledge Base article 326574, and have verified that "C:\windows;
> > > c:\windows\system32; c:\windows\system32\wbem" are all contained in my
> > > PATH.
> > >
> > > What could the problem be? Does it appear that I need to reinstall the
> > > O/S?
> >
> >

[jay]

Wesley: YES, there are slashes ("\") in the PATH variable. My path was
fairly long:

%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\Sy stem32\Wbem;C:\oracle\reports\bin;C:\oracle\report s9i\bin;C:\Program
Files\Oracle\jre\1.1.8\bin;c:\Program Files\Microsoft SQL
Server\90\Tools\binn\;C:\Program Files\Dell\SysMgt\RAC


Nass: The installed version of MSXML is 4, sp2 from Windows Update KB927978.
The installed MSXML Parser is version 6.


"nass" wrote:

> Hi Jay,
> What version of MSXML you have installed now on your server?.
> Read this article:
> http://support.microsoft.com/kb/816598
>
> Open the Run Command and type in these DLLs (you may need just one but try
> both if the first didn't help):
> regsvr32 msxml4.dll Click [OK] and Reboot the machine Note if you have
> MSXML3 replace the number and re-register the DLL.
> regsvr32 /u msxml4.dll
> HTH.
> Let us know.
> Regards,
> nass
>
> "Jay" wrote:
>
> > These solutions did NOT resolve the problem.
> > As I stated in my original post, I already reviewed and tried KB326574 and
> > confirmed that the correct PATH variables are in place.
> >
> > Any other suggestions?
> >
> > "Wesley Vogel" wrote:
> >
> > > Error Message "Snap-in Failed to Initialize" When You Use Microsoft
> > > Management Console
> > > http://support.microsoft.com/kb/297064
> > >
> > > "Snap-in Failed to Initialize" Error Message When You Open Microsoft
> > > Management Console
> > > http://support.microsoft.com/kb/826282
> > >
> > > You receive a "Cannot open <Snap-in Name>" error message when you try to
> > > start MMC on a Windows XP-based computer
> > > http://support.microsoft.com/kb/326574
> > >
> > > Device Manager Snap-in fails to initialize
> > > http://windowsxp.mvps.org/devmgr.htm
> > >
> > > "Action Canceled" error while opening Device Manager
> > > http://windowsxp.mvps.org/dmocx.htm
> > >
> > > Make sure that %SystemRoot%\System32\WBEM is in the PATH.
> > >
> > > Note: %SystemRoot% is usually the same thing as C:\WINDOWS
> > >
> > > I.e. %SystemRoot%\System32 = C:\WINDOWS\system32
> > >
> > > Open a command prompt...
> > > Start | Run | Type: cmd | Click OK |
> > > When the command prompt opens, type: path and then hit your Enter key.
> > >
> > > It should look something like this...
> > >
> > > PATH=C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\Sys tem32\Wbem
> > >
> > > There may be more items, but make sure that you see WINDOWS\System32\Wbem
> > >
> > > This behavior can also occur if your PATH environment variable ends with \
> > >
> > > To resolve the problem
> > > 1. Right-click My Computer and press Properties.
> > > 2. Select the Advanced tab.
> > > 3. Press the Environment Variables button.
> > > 4. Double-click PATH in the System variables area.
> > > 5. Remove the \ from the end of the string.
> > > 6. Press OK and OK.
> > >
> > > --
> > > Hope this helps. Let us know.
> > >
> > > Wes
> > > MS-MVP Windows Shell/User
> > >
> > > In ,
> > > Jay > hunted and pecked:
> > > > When I attempt to "Manage" my computer, I get the error message:
> > > >
> > > > MMC cannot open the file C:\WINDOWS\SYSTEM32\COMPMGMT.MSC
> > > > This may be because the file does not exist, is not an MMC console, or was
> > > > created by a later version of MMC. This may also be because you do not
> > > > have sufficient access rights to the file.
> > > >
> > > > I get the same erro when I attempt to open the Event Viewer, Services,
> > > > etc. (basically anything in Administrative Tools).
> > > >
> > > > So, I clicked START-->RUN and keyed in MMC and pressed ENTER.
> > > > I added the necessary snap-ins and attempted to save the MMC console as
> > > > "console1" and put it in:
> > > > DOCS&SETTINGS\ALLUSERS\STARTMENU\PROGRAMS\ADMINISTRATIV E-TOOLS and I get
> > > > an error message stating:
> > > > "MMC cannot save the console"
> > > >
> > > > I am logged into the system as Local Administrator with full security
> > > > privileges to the entire machine.
> > > >
> > > > I found Knowledge Base article 326574, and have verified that "C:\windows;
> > > > c:\windows\system32; c:\windows\system32\wbem" are all contained in my
> > > > PATH.
> > > >
> > > > What could the problem be? Does it appear that I need to reinstall the
> > > > O/S?
> > >
> > >

[Dan P. Beckner]

Jay,

did you ever get an answer to this. I suddenly got the same exact
problem you have. It was after I reinstalled a clean install of XP
and SP2. I had the exact same install on exactly the same machine
before the reinstall. Previous install had become unstable after
about 9 months of use, so I was reinstalling.

Thanks,

Dan P. Beckner


On Wed, 14 Feb 2007 10:10:23 -0800, Jay
> wrote:

>When I attempt to "Manage" my computer, I get the error message:
>
>MMC cannot open the file C:\WINDOWS\SYSTEM32\COMPMGMT.MSC
>This may be because the file does not exist, is not an MMC console, or was
>created by a later version of MMC. This may also be because you do not have
>sufficient access rights to the file.
>
>I get the same erro when I attempt to open the Event Viewer, Services, etc.
>(basically anything in Administrative Tools).
>
>So, I clicked START-->RUN and keyed in MMC and pressed ENTER.
>I added the necessary snap-ins and attempted to save the MMC console as
>"console1" and put it in:
>DOCS&SETTINGS\ALLUSERS\STARTMENU\PROGRAMS\ADMINISTRATIV E-TOOLS and I get an
>error message stating:
>"MMC cannot save the console"
>
>I am logged into the system as Local Administrator with full security
>privileges to the entire machine.
>
>I found Knowledge Base article 326574, and have verified that "C:\windows;
>c:\windows\system32; c:\windows\system32\wbem" are all contained in my PATH.
>
>What could the problem be? Does it appear that I need to reinstall the O/S?