standby mode...

[CoMpMaStErRyAn]

is there any way to make it so that when the computer is on standby mode,
moving the mouse will NOT take it off standby? I have a cat and i put my
computer on standby every night, and she always jumps onto my desk, bumps the
mouse, and turns the computer on all night. I want to make it so that the
only way the computer can come off standby is by either pressing the power
button on the computer or pressing a key on the keyboard. Is this possible?

[Ayush]

Replied to [CoMpMaStErRyAn]s message :
> is there any way to make it so that when the computer is on standby mode,
> moving the mouse will NOT take it off standby? I have a cat and i put my
> computer on standby every night, and she always jumps onto my desk, bumps the
> mouse, and turns the computer on all night. I want to make it so that the
> only way the computer can come off standby is by either pressing the power
> button on the computer or pressing a key on the keyboard. Is this possible?

Use Hibernation :
http://en.wikipedia.org/wiki/Hibernate_(OS_feature)




Good Luck, Ayush.
--
XP-Tips [Set up XP so that only authorized people can use it] :
http://www.microsoft.com/windowsxp/using/setup/tips/soleuser.mspx

[Tx2]

In article >,
CoMpMaStErRyAn
of , felt we'd be interested in
the following...


> is there any way to make it so that when the computer is on standby mode,
> moving the mouse will NOT take it off standby? I have a cat and i put my
> computer on standby every night, and she always jumps onto my desk, bumps the
> mouse, and turns the computer on all night. I want to make it so that the
> only way the computer can come off standby is by either pressing the power
> button on the computer or pressing a key on the keyboard. Is this possible?

Something in the BIOS I would suggest. Not sure without knowing which
BIOS you have, but that would be my guess at where to look.

Don't let any eco-warrior's know it's left on without good reason
though!

:-)

--
My reply address is invalid.
Please post replies to the group.
Messages posted via Google Groups are set to 'auto-ignore'
XPS M1710 / 2.16 GHz dual core / 2Gb DDR2 / nVidia GeForce 7950GTX

[CoMpMaStErRyAn]

hibernation doesn't work on my computer. whenever i try to hibernate it, it
just restarts.

"CoMpMaStErRyAn" wrote:

> is there any way to make it so that when the computer is on standby mode,
> moving the mouse will NOT take it off standby? I have a cat and i put my
> computer on standby every night, and she always jumps onto my desk, bumps the
> mouse, and turns the computer on all night. I want to make it so that the
> only way the computer can come off standby is by either pressing the power
> button on the computer or pressing a key on the keyboard. Is this possible?

[Milt]

This won't answer your question, but it may make it easier for you to live
with it:

http://video.google.com/videoplay?docid=-6497257644936185526


Milt

"CoMpMaStErRyAn" wrote:

> is there any way to make it so that when the computer is on standby mode,
> moving the mouse will NOT take it off standby? I have a cat and i put my
> computer on standby every night, and she always jumps onto my desk, bumps the
> mouse, and turns the computer on all night. I want to make it so that the
> only way the computer can come off standby is by either pressing the power
> button on the computer or pressing a key on the keyboard. Is this possible?

[Poprivet]

CoMpMaStErRyAn wrote:
> is there any way to make it so that when the computer is on standby
> mode, moving the mouse will NOT take it off standby? I have a cat and
> i put my computer on standby every night, and she always jumps onto
> my desk, bumps the mouse, and turns the computer on all night. I want
> to make it so that the only way the computer can come off standby is
> by either pressing the power button on the computer or pressing a key
> on the keyboard. Is this possible?

Not much to go on here, and having read that Hibernation just Restarts, not
sure how much this will help, but ... in view of the little information
given:

-- There might be a CMOS setting for the mouse to bring the system out of
standby with the mouse. Check there first. My current machine has no such
thing, but my last one did.

-- There might be an option in your Mouse Properties; check that.

-- Also, check Control Panel's Power Options; there is usually such a
setting there. That's also where you turn hibernation on/off and adjust hte
room it needs.

Part of your problem -could- be whatever is preventing Hibernation from
working, assuming it's turned on. It sounds like it is? If so, check the
amount of space reserved for it; I think there is a recommended size given
in the dialog somewhere.

Two safe to use things come to mind that may help with problems like
this:
1. UPHClean from Microsoft. That's a User Hive Cleanup app that makes NO
changes, but cleans up fodder and chaff. Most useful for slow shut downs,
but helps other things, too.
2. NTRegopt is a registry optimizer from, I think, Sysinternals (now owned
by MS). It also makes no changes to the registry, but does re-organize the
sequence of the hives during boot. Try it and see if it doesn't help. If
you can't find it, Google will turn up lots of sources for it, including
sysinternal's site, which will redirect you to the right place at MS. Or,
just go to sysinternals.com and let it redirect you.

HTH
Pop`

[CoMpMaStErRyAn]

thanks for all the info. unfortunately, there are no settings in mouse
properties for the standby option on my computer. How do i check the CMOS
settings that you mentioned?

"Poprivet" wrote:

> CoMpMaStErRyAn wrote:
> > is there any way to make it so that when the computer is on standby
> > mode, moving the mouse will NOT take it off standby? I have a cat and
> > i put my computer on standby every night, and she always jumps onto
> > my desk, bumps the mouse, and turns the computer on all night. I want
> > to make it so that the only way the computer can come off standby is
> > by either pressing the power button on the computer or pressing a key
> > on the keyboard. Is this possible?
>
> Not much to go on here, and having read that Hibernation just Restarts, not
> sure how much this will help, but ... in view of the little information
> given:
>
> -- There might be a CMOS setting for the mouse to bring the system out of
> standby with the mouse. Check there first. My current machine has no such
> thing, but my last one did.
>
> -- There might be an option in your Mouse Properties; check that.
>
> -- Also, check Control Panel's Power Options; there is usually such a
> setting there. That's also where you turn hibernation on/off and adjust hte
> room it needs.
>
> Part of your problem -could- be whatever is preventing Hibernation from
> working, assuming it's turned on. It sounds like it is? If so, check the
> amount of space reserved for it; I think there is a recommended size given
> in the dialog somewhere.
>
> Two safe to use things come to mind that may help with problems like
> this:
> 1. UPHClean from Microsoft. That's a User Hive Cleanup app that makes NO
> changes, but cleans up fodder and chaff. Most useful for slow shut downs,
> but helps other things, too.
> 2. NTRegopt is a registry optimizer from, I think, Sysinternals (now owned
> by MS). It also makes no changes to the registry, but does re-organize the
> sequence of the hives during boot. Try it and see if it doesn't help. If
> you can't find it, Google will turn up lots of sources for it, including
> sysinternal's site, which will redirect you to the right place at MS. Or,
> just go to sysinternals.com and let it redirect you.
>
> HTH
> Pop`
>
>
>
>
>
>
>

[Tx2]

In article >,
CoMpMaStErRyAn
of , felt we'd be interested in
the following...


> thanks for all the info. unfortunately, there are no settings in mouse
> properties for the standby option on my computer. How do i check the CMOS
> settings that you mentioned?

You usually hit the DEL key as the PC is booting, right after you turn
it on. Look for a message that says something like "hit DEL to enter
setup". On my Dell though, for example, I have to hit F2.

This will get you entry where you can change CMOS settings.

The BIOS and CMOS are different, but for whatever reason, this 'area' of
the PC is commonly referred to only as the BIOS.

http://www.computerhope.com/issues/ch000707.htm refers.

Do be careful though, this is not a place you want to be fiddling in if
you don't know what you are doing.

--
My reply address is invalid.
Please post replies to the group.
Messages posted via Google Groups are set to 'auto-ignore'
XPS M1710 / 2.16 GHz dual core / 2Gb DDR2 / nVidia GeForce 7950GTX

[CoMpMaStErRyAn]

okay, i went into the BIOS setup when my computer started up, i looked
through every menu and submenu on there, and i could not find anything about
standby or CMOS settings. now what do i do??

"Tx2" wrote:

> In article >,
> CoMpMaStErRyAn
> of , felt we'd be interested in
> the following...
>
>
> > thanks for all the info. unfortunately, there are no settings in mouse
> > properties for the standby option on my computer. How do i check the CMOS
> > settings that you mentioned?
>
> You usually hit the DEL key as the PC is booting, right after you turn
> it on. Look for a message that says something like "hit DEL to enter
> setup". On my Dell though, for example, I have to hit F2.
>
> This will get you entry where you can change CMOS settings.
>
> The BIOS and CMOS are different, but for whatever reason, this 'area' of
> the PC is commonly referred to only as the BIOS.
>
> http://www.computerhope.com/issues/ch000707.htm refers.
>
> Do be careful though, this is not a place you want to be fiddling in if
> you don't know what you are doing.
>
> --
> My reply address is invalid.
> Please post replies to the group.
> Messages posted via Google Groups are set to 'auto-ignore'
> XPS M1710 / 2.16 GHz dual core / 2Gb DDR2 / nVidia GeForce 7950GTX
>

[Tx2]

In article >,
CoMpMaStErRyAn of ,
felt we'd be interested in the following...

[top posting fixed]

> "Tx2" wrote:
>
> > In article >,
> > CoMpMaStErRyAn
> > of , felt we'd be interested in
> > the following...
> >
> >
> > > thanks for all the info. unfortunately, there are no settings in mouse
> > > properties for the standby option on my computer. How do i check the CMOS
> > > settings that you mentioned?
> >
> > You usually hit the DEL key as the PC is booting, right after you turn
> > it on. Look for a message that says something like "hit DEL to enter
> > setup". On my Dell though, for example, I have to hit F2.
> >
> > This will get you entry where you can change CMOS settings.
> >
> > The BIOS and CMOS are different, but for whatever reason, this 'area' of
> > the PC is commonly referred to only as the BIOS.
> >
> > http://www.computerhope.com/issues/ch000707.htm refers.
> >
> > Do be careful though, this is not a place you want to be fiddling in if
> > you don't know what you are doing.

> okay, i went into the BIOS setup when my computer started up, i looked
> through every menu and submenu on there, and i could not find anything about
> standby or CMOS settings. now what do i do??

If you can't find it, it might not be there at all, which ultimately
means you can't prevent whatever it is you are trying to prevent from
occurring.

What machine is it?


--
My reply address is invalid.
Please post replies to the group.
Messages posted via Google Groups are set to 'auto-ignore'
XPS M1710 / 2.16 GHz dual core / 2Gb DDR2 / nVidia GeForce 7950GTX

[CoMpMaStErRyAn]

Gateway 507GR

"Tx2" wrote:

> In article >,
> CoMpMaStErRyAn of ,
> felt we'd be interested in the following...
>
> [top posting fixed]
>
> > "Tx2" wrote:
> >
> > > In article >,
> > > CoMpMaStErRyAn
> > > of , felt we'd be interested in
> > > the following...
> > >
> > >
> > > > thanks for all the info. unfortunately, there are no settings in mouse
> > > > properties for the standby option on my computer. How do i check the CMOS
> > > > settings that you mentioned?
> > >
> > > You usually hit the DEL key as the PC is booting, right after you turn
> > > it on. Look for a message that says something like "hit DEL to enter
> > > setup". On my Dell though, for example, I have to hit F2.
> > >
> > > This will get you entry where you can change CMOS settings.
> > >
> > > The BIOS and CMOS are different, but for whatever reason, this 'area' of
> > > the PC is commonly referred to only as the BIOS.
> > >
> > > http://www.computerhope.com/issues/ch000707.htm refers.
> > >
> > > Do be careful though, this is not a place you want to be fiddling in if
> > > you don't know what you are doing.
>
> > okay, i went into the BIOS setup when my computer started up, i looked
> > through every menu and submenu on there, and i could not find anything about
> > standby or CMOS settings. now what do i do??
>
> If you can't find it, it might not be there at all, which ultimately
> means you can't prevent whatever it is you are trying to prevent from
> occurring.
>
> What machine is it?
>
>
> --
> My reply address is invalid.
> Please post replies to the group.
> Messages posted via Google Groups are set to 'auto-ignore'
> XPS M1710 / 2.16 GHz dual core / 2Gb DDR2 / nVidia GeForce 7950GTX
>

[bxf]

On Feb 25, 4:39 pm, CoMpMaStErRyAn
> wrote:
> is there any way to make it so that when the computer is on standby mode,
> moving the mouse will NOT take it off standby? I have a cat and i put my
> computer on standby every night, and she always jumps onto my desk, bumps the
> mouse, and turns the computer on all night. I want to make it so that the
> only way the computer can come off standby is by either pressing the power
> button on the computer or pressing a key on the keyboard. Is this possible?

The following is the technique used to do the opposite of what you
want to accomplish:

In order to enable wake-up from S3 Standby by moving the USB mouse,
the following Registry entry was added:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\usb
USBBIOSx=DWORD:00000000

Therefore, you may want to try deleting this entry (USBBIOSx) from the
Registry and see if it helps. You can always re-add it if necessary.

[Andrew Murray]

unplug the mouse?

"CoMpMaStErRyAn" > wrote in message
...
> is there any way to make it so that when the computer is on standby mode,
> moving the mouse will NOT take it off standby? I have a cat and i put my
> computer on standby every night, and she always jumps onto my desk, bumps
> the
> mouse, and turns the computer on all night. I want to make it so that the
> only way the computer can come off standby is by either pressing the power
> button on the computer or pressing a key on the keyboard. Is this
> possible?

[Andrew Murray]

unplug the mouse...but what's to stop the cat wallking on the keyboard,
therefore waking up the PC anyway?


"CoMpMaStErRyAn" > wrote in message
...
> is there any way to make it so that when the computer is on standby mode,
> moving the mouse will NOT take it off standby? I have a cat and i put my
> computer on standby every night, and she always jumps onto my desk, bumps
> the
> mouse, and turns the computer on all night. I want to make it so that the
> only way the computer can come off standby is by either pressing the power
> button on the computer or pressing a key on the keyboard. Is this
> possible?

[Janelle Lister]

Yes, it is possible to stop the mouse from bringing your computer out of
stand by or hibernation. It's very easy. Do this:

Open "Control Panel"
Open "Mouse"
Click "Hardware" tab (A second menu will pop open)
Click "Power Management" tab

You will see two questions, each with a check box:

Allow the computer to turn off this device to save power.
and
Allow this device to bring the computer out of standby

You check the box for yes, leave it unchecked for no.

You definitely don't have to delete or enter any code. If you don't know
how to do this you probably shouldn't be messing with your BIOS or CMOS
settings.





"CoMpMaStErRyAn" wrote:

> is there any way to make it so that when the computer is on standby mode,
> moving the mouse will NOT take it off standby? I have a cat and i put my
> computer on standby every night, and she always jumps onto my desk, bumps the
> mouse, and turns the computer on all night. I want to make it so that the
> only way the computer can come off standby is by either pressing the power
> button on the computer or pressing a key on the keyboard. Is this possible?