PCbanter

PCbanter (http://www.pcbanter.net/index.php)
-   Networking and the Internet with Windows XP (http://www.pcbanter.net/forumdisplay.php?f=37)
-   -   LAN is working but Internet is not working (http://www.pcbanter.net/showthread.php?t=1067396)

Yagyesh Sharma March 26th 10 04:34 PM

LAN is working but Internet is not working
 
Hello Everyone,

Problem: I am able to access the computers, and the printers in my network,
but am unable to browse any website.
Error received: Internet Explorer Cannot display the webpage

Network Setup: I am on a Peer-to-Peer Network with no firewall on the
gateway. The Router is connected to the Network Switch, and my computer is
also connected o the network switch (sae or different switch, and the network
switches are interconnected).
Information about my Computer: I am running Windows XP Service Pack 3, with
Internet Explorer 8. I am also running Symantec Endpoint Protection on my
system with Windows Firewall disabled.
Notes: 1. The other computers in the Network are working fine.
2. The Ping to the default gateway (192.168.1.1), 127.0.0.1, localhost, and
other computers on the network is successful.

STEPS taken by me:-
Step I:
1. Ran - "Diagnose Connection Problems" from inside Internet Explorer 8
2. Error received: "Windows has detected a problem with the Winsock provider
catalog on this computer.........Would you like Windows to reset the catalog
to the default configuration?"...
3. Clicked Next to reset the Winsock
4. Restarted the computer
5. Not solved

Step II:
1. Followed the following more ways to reset the winsock:
a. netsh winsock reset (Command Prompt)
b. Microsoft Fixit 50203
c. WinsockXPFix.exe utility by Option^Explicit Software Solutions
2. Restarted in all the steps
3. Not Solved

Step III:
1. Ran all the different netdiag tests, which passed successfully.
2. Not Solved

Step IV:
1. System Restore
2. Not Solved

Step V:
1. Deleted the Registry Keys 'Winsock' and 'Winsock2'.
2. Restarted the system
3. Installed TCP/IP
4. Not Solved

Step VI:
1. Ran LSPFix.exe from Cexx.org
2. "No Problems Found"
3. Restarted the system
4. Still not solved

Request for your Help!
Regards,
Yagyesh



Bob Lin \(MS-MVP\) March 26th 10 06:08 PM

LAN is working but Internet is not working
 
Can you ping a public IP address, for example ping 4.2.2.1? If yes, check
the DNS settings. If not, post the result of ipconfig /all here.

--
Bob Lin, Microsoft-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com


"Yagyesh Sharma" wrote in message
...
Hello Everyone,

Problem: I am able to access the computers, and the printers in my
network,
but am unable to browse any website.
Error received: Internet Explorer Cannot display the webpage

Network Setup: I am on a Peer-to-Peer Network with no firewall on the
gateway. The Router is connected to the Network Switch, and my computer is
also connected o the network switch (sae or different switch, and the
network
switches are interconnected).
Information about my Computer: I am running Windows XP Service Pack 3,
with
Internet Explorer 8. I am also running Symantec Endpoint Protection on my
system with Windows Firewall disabled.
Notes: 1. The other computers in the Network are working fine.
2. The Ping to the default gateway (192.168.1.1), 127.0.0.1, localhost,
and
other computers on the network is successful.

STEPS taken by me:-
Step I:
1. Ran - "Diagnose Connection Problems" from inside Internet Explorer 8
2. Error received: "Windows has detected a problem with the Winsock
provider
catalog on this computer.........Would you like Windows to reset the
catalog
to the default configuration?"...
3. Clicked Next to reset the Winsock
4. Restarted the computer
5. Not solved

Step II:
1. Followed the following more ways to reset the winsock:
a. netsh winsock reset (Command Prompt)
b. Microsoft Fixit 50203
c. WinsockXPFix.exe utility by Option^Explicit Software Solutions
2. Restarted in all the steps
3. Not Solved

Step III:
1. Ran all the different netdiag tests, which passed successfully.
2. Not Solved

Step IV:
1. System Restore
2. Not Solved

Step V:
1. Deleted the Registry Keys 'Winsock' and 'Winsock2'.
2. Restarted the system
3. Installed TCP/IP
4. Not Solved

Step VI:
1. Ran LSPFix.exe from Cexx.org
2. "No Problems Found"
3. Restarted the system
4. Still not solved

Request for your Help!
Regards,
Yagyesh




Bob Lin \(MS-MVP\) March 26th 10 06:08 PM

LAN is working but Internet is not working
 
Can you ping a public IP address, for example ping 4.2.2.1? If yes, check
the DNS settings. If not, post the result of ipconfig /all here.

--
Bob Lin, Microsoft-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com


"Yagyesh Sharma" wrote in message
...
Hello Everyone,

Problem: I am able to access the computers, and the printers in my
network,
but am unable to browse any website.
Error received: Internet Explorer Cannot display the webpage

Network Setup: I am on a Peer-to-Peer Network with no firewall on the
gateway. The Router is connected to the Network Switch, and my computer is
also connected o the network switch (sae or different switch, and the
network
switches are interconnected).
Information about my Computer: I am running Windows XP Service Pack 3,
with
Internet Explorer 8. I am also running Symantec Endpoint Protection on my
system with Windows Firewall disabled.
Notes: 1. The other computers in the Network are working fine.
2. The Ping to the default gateway (192.168.1.1), 127.0.0.1, localhost,
and
other computers on the network is successful.

STEPS taken by me:-
Step I:
1. Ran - "Diagnose Connection Problems" from inside Internet Explorer 8
2. Error received: "Windows has detected a problem with the Winsock
provider
catalog on this computer.........Would you like Windows to reset the
catalog
to the default configuration?"...
3. Clicked Next to reset the Winsock
4. Restarted the computer
5. Not solved

Step II:
1. Followed the following more ways to reset the winsock:
a. netsh winsock reset (Command Prompt)
b. Microsoft Fixit 50203
c. WinsockXPFix.exe utility by Option^Explicit Software Solutions
2. Restarted in all the steps
3. Not Solved

Step III:
1. Ran all the different netdiag tests, which passed successfully.
2. Not Solved

Step IV:
1. System Restore
2. Not Solved

Step V:
1. Deleted the Registry Keys 'Winsock' and 'Winsock2'.
2. Restarted the system
3. Installed TCP/IP
4. Not Solved

Step VI:
1. Ran LSPFix.exe from Cexx.org
2. "No Problems Found"
3. Restarted the system
4. Still not solved

Request for your Help!
Regards,
Yagyesh




JimC March 28th 10 11:08 PM

LAN is working but Internet is not working
 
Try using Internet Explorer without add-ons. Go to
StartProgramsAccessoriesSystem Toolschoose Internet Explorer (no
add-ons). If your internet pages now show ok, I suspect you have a problem
with a plug-in or add-on. Open IE again and then choose ToolsInternet
OptionsAdvanced then choose 'Reset'. This will clear most problems - but
will also clear any saved passwords for websites.

Still trouble? Try disabling the adapter and then re-enabling it- solves
many issues
Failing that open device manager - uninstall the adapter. Then choose 'scan
for hardware changes' - should find the adapter and install automatically.
Saves a lot of command line work.
Good luck
Jim

"Yagyesh Sharma" wrote in message
...
Hello Everyone,

Problem: I am able to access the computers, and the printers in my
network,
but am unable to browse any website.
Error received: Internet Explorer Cannot display the webpage

Network Setup: I am on a Peer-to-Peer Network with no firewall on the
gateway. The Router is connected to the Network Switch, and my computer is
also connected o the network switch (sae or different switch, and the
network
switches are interconnected).
Information about my Computer: I am running Windows XP Service Pack 3,
with
Internet Explorer 8. I am also running Symantec Endpoint Protection on my
system with Windows Firewall disabled.
Notes: 1. The other computers in the Network are working fine.
2. The Ping to the default gateway (192.168.1.1), 127.0.0.1, localhost,
and
other computers on the network is successful.

STEPS taken by me:-
Step I:
1. Ran - "Diagnose Connection Problems" from inside Internet Explorer 8
2. Error received: "Windows has detected a problem with the Winsock
provider
catalog on this computer.........Would you like Windows to reset the
catalog
to the default configuration?"...
3. Clicked Next to reset the Winsock
4. Restarted the computer
5. Not solved

Step II:
1. Followed the following more ways to reset the winsock:
a. netsh winsock reset (Command Prompt)
b. Microsoft Fixit 50203
c. WinsockXPFix.exe utility by Option^Explicit Software Solutions
2. Restarted in all the steps
3. Not Solved

Step III:
1. Ran all the different netdiag tests, which passed successfully.
2. Not Solved

Step IV:
1. System Restore
2. Not Solved

Step V:
1. Deleted the Registry Keys 'Winsock' and 'Winsock2'.
2. Restarted the system
3. Installed TCP/IP
4. Not Solved

Step VI:
1. Ran LSPFix.exe from Cexx.org
2. "No Problems Found"
3. Restarted the system
4. Still not solved

Request for your Help!
Regards,
Yagyesh




JimC March 28th 10 11:08 PM

LAN is working but Internet is not working
 
Try using Internet Explorer without add-ons. Go to
StartProgramsAccessoriesSystem Toolschoose Internet Explorer (no
add-ons). If your internet pages now show ok, I suspect you have a problem
with a plug-in or add-on. Open IE again and then choose ToolsInternet
OptionsAdvanced then choose 'Reset'. This will clear most problems - but
will also clear any saved passwords for websites.

Still trouble? Try disabling the adapter and then re-enabling it- solves
many issues
Failing that open device manager - uninstall the adapter. Then choose 'scan
for hardware changes' - should find the adapter and install automatically.
Saves a lot of command line work.
Good luck
Jim

"Yagyesh Sharma" wrote in message
...
Hello Everyone,

Problem: I am able to access the computers, and the printers in my
network,
but am unable to browse any website.
Error received: Internet Explorer Cannot display the webpage

Network Setup: I am on a Peer-to-Peer Network with no firewall on the
gateway. The Router is connected to the Network Switch, and my computer is
also connected o the network switch (sae or different switch, and the
network
switches are interconnected).
Information about my Computer: I am running Windows XP Service Pack 3,
with
Internet Explorer 8. I am also running Symantec Endpoint Protection on my
system with Windows Firewall disabled.
Notes: 1. The other computers in the Network are working fine.
2. The Ping to the default gateway (192.168.1.1), 127.0.0.1, localhost,
and
other computers on the network is successful.

STEPS taken by me:-
Step I:
1. Ran - "Diagnose Connection Problems" from inside Internet Explorer 8
2. Error received: "Windows has detected a problem with the Winsock
provider
catalog on this computer.........Would you like Windows to reset the
catalog
to the default configuration?"...
3. Clicked Next to reset the Winsock
4. Restarted the computer
5. Not solved

Step II:
1. Followed the following more ways to reset the winsock:
a. netsh winsock reset (Command Prompt)
b. Microsoft Fixit 50203
c. WinsockXPFix.exe utility by Option^Explicit Software Solutions
2. Restarted in all the steps
3. Not Solved

Step III:
1. Ran all the different netdiag tests, which passed successfully.
2. Not Solved

Step IV:
1. System Restore
2. Not Solved

Step V:
1. Deleted the Registry Keys 'Winsock' and 'Winsock2'.
2. Restarted the system
3. Installed TCP/IP
4. Not Solved

Step VI:
1. Ran LSPFix.exe from Cexx.org
2. "No Problems Found"
3. Restarted the system
4. Still not solved

Request for your Help!
Regards,
Yagyesh




Yagyesh Sharma March 29th 10 11:54 AM

LAN is working but Internet is not working
 
Thank you very much Jim. But, surprisingly after coming back to office after
the weekend, the Internet has started to work,without me doing any thing!!!
Any ideas as to what could have happened; because, I tried resetting the
adapter many times between the steps followed by me?
Thank you
Yagyesh

"JimC" wrote:

Try using Internet Explorer without add-ons. Go to
StartProgramsAccessoriesSystem Toolschoose Internet Explorer (no
add-ons). If your internet pages now show ok, I suspect you have a problem
with a plug-in or add-on. Open IE again and then choose ToolsInternet
OptionsAdvanced then choose 'Reset'. This will clear most problems - but
will also clear any saved passwords for websites.

Still trouble? Try disabling the adapter and then re-enabling it- solves
many issues
Failing that open device manager - uninstall the adapter. Then choose 'scan
for hardware changes' - should find the adapter and install automatically.
Saves a lot of command line work.
Good luck
Jim

"Yagyesh Sharma" wrote in message
...
Hello Everyone,

Problem: I am able to access the computers, and the printers in my
network,
but am unable to browse any website.
Error received: Internet Explorer Cannot display the webpage

Network Setup: I am on a Peer-to-Peer Network with no firewall on the
gateway. The Router is connected to the Network Switch, and my computer is
also connected o the network switch (sae or different switch, and the
network
switches are interconnected).
Information about my Computer: I am running Windows XP Service Pack 3,
with
Internet Explorer 8. I am also running Symantec Endpoint Protection on my
system with Windows Firewall disabled.
Notes: 1. The other computers in the Network are working fine.
2. The Ping to the default gateway (192.168.1.1), 127.0.0.1, localhost,
and
other computers on the network is successful.

STEPS taken by me:-
Step I:
1. Ran - "Diagnose Connection Problems" from inside Internet Explorer 8
2. Error received: "Windows has detected a problem with the Winsock
provider
catalog on this computer.........Would you like Windows to reset the
catalog
to the default configuration?"...
3. Clicked Next to reset the Winsock
4. Restarted the computer
5. Not solved

Step II:
1. Followed the following more ways to reset the winsock:
a. netsh winsock reset (Command Prompt)
b. Microsoft Fixit 50203
c. WinsockXPFix.exe utility by Option^Explicit Software Solutions
2. Restarted in all the steps
3. Not Solved

Step III:
1. Ran all the different netdiag tests, which passed successfully.
2. Not Solved

Step IV:
1. System Restore
2. Not Solved

Step V:
1. Deleted the Registry Keys 'Winsock' and 'Winsock2'.
2. Restarted the system
3. Installed TCP/IP
4. Not Solved

Step VI:
1. Ran LSPFix.exe from Cexx.org
2. "No Problems Found"
3. Restarted the system
4. Still not solved

Request for your Help!
Regards,
Yagyesh




Yagyesh Sharma March 29th 10 11:54 AM

LAN is working but Internet is not working
 
Thank you very much Jim. But, surprisingly after coming back to office after
the weekend, the Internet has started to work,without me doing any thing!!!
Any ideas as to what could have happened; because, I tried resetting the
adapter many times between the steps followed by me?
Thank you
Yagyesh

"JimC" wrote:

Try using Internet Explorer without add-ons. Go to
StartProgramsAccessoriesSystem Toolschoose Internet Explorer (no
add-ons). If your internet pages now show ok, I suspect you have a problem
with a plug-in or add-on. Open IE again and then choose ToolsInternet
OptionsAdvanced then choose 'Reset'. This will clear most problems - but
will also clear any saved passwords for websites.

Still trouble? Try disabling the adapter and then re-enabling it- solves
many issues
Failing that open device manager - uninstall the adapter. Then choose 'scan
for hardware changes' - should find the adapter and install automatically.
Saves a lot of command line work.
Good luck
Jim

"Yagyesh Sharma" wrote in message
...
Hello Everyone,

Problem: I am able to access the computers, and the printers in my
network,
but am unable to browse any website.
Error received: Internet Explorer Cannot display the webpage

Network Setup: I am on a Peer-to-Peer Network with no firewall on the
gateway. The Router is connected to the Network Switch, and my computer is
also connected o the network switch (sae or different switch, and the
network
switches are interconnected).
Information about my Computer: I am running Windows XP Service Pack 3,
with
Internet Explorer 8. I am also running Symantec Endpoint Protection on my
system with Windows Firewall disabled.
Notes: 1. The other computers in the Network are working fine.
2. The Ping to the default gateway (192.168.1.1), 127.0.0.1, localhost,
and
other computers on the network is successful.

STEPS taken by me:-
Step I:
1. Ran - "Diagnose Connection Problems" from inside Internet Explorer 8
2. Error received: "Windows has detected a problem with the Winsock
provider
catalog on this computer.........Would you like Windows to reset the
catalog
to the default configuration?"...
3. Clicked Next to reset the Winsock
4. Restarted the computer
5. Not solved

Step II:
1. Followed the following more ways to reset the winsock:
a. netsh winsock reset (Command Prompt)
b. Microsoft Fixit 50203
c. WinsockXPFix.exe utility by Option^Explicit Software Solutions
2. Restarted in all the steps
3. Not Solved

Step III:
1. Ran all the different netdiag tests, which passed successfully.
2. Not Solved

Step IV:
1. System Restore
2. Not Solved

Step V:
1. Deleted the Registry Keys 'Winsock' and 'Winsock2'.
2. Restarted the system
3. Installed TCP/IP
4. Not Solved

Step VI:
1. Ran LSPFix.exe from Cexx.org
2. "No Problems Found"
3. Restarted the system
4. Still not solved

Request for your Help!
Regards,
Yagyesh




Yagyesh Sharma March 29th 10 11:55 AM

LAN is working but Internet is not working
 
Thank you very much Bob. But, surprisingly after coming back to office after
the weekend, the Internet has started to work,without me doing any thing!!!
Any ideas as to what could have happened; because, I tried pinging
"www.yahoo.com" many times between the steps followed by me?
Thank you
Yagyesh

"Bob Lin (MS-MVP)" wrote:

Can you ping a public IP address, for example ping 4.2.2.1? If yes, check
the DNS settings. If not, post the result of ipconfig /all here.

--
Bob Lin, Microsoft-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com


"Yagyesh Sharma" wrote in message
...
Hello Everyone,

Problem: I am able to access the computers, and the printers in my
network,
but am unable to browse any website.
Error received: Internet Explorer Cannot display the webpage

Network Setup: I am on a Peer-to-Peer Network with no firewall on the
gateway. The Router is connected to the Network Switch, and my computer is
also connected o the network switch (sae or different switch, and the
network
switches are interconnected).
Information about my Computer: I am running Windows XP Service Pack 3,
with
Internet Explorer 8. I am also running Symantec Endpoint Protection on my
system with Windows Firewall disabled.
Notes: 1. The other computers in the Network are working fine.
2. The Ping to the default gateway (192.168.1.1), 127.0.0.1, localhost,
and
other computers on the network is successful.

STEPS taken by me:-
Step I:
1. Ran - "Diagnose Connection Problems" from inside Internet Explorer 8
2. Error received: "Windows has detected a problem with the Winsock
provider
catalog on this computer.........Would you like Windows to reset the
catalog
to the default configuration?"...
3. Clicked Next to reset the Winsock
4. Restarted the computer
5. Not solved

Step II:
1. Followed the following more ways to reset the winsock:
a. netsh winsock reset (Command Prompt)
b. Microsoft Fixit 50203
c. WinsockXPFix.exe utility by Option^Explicit Software Solutions
2. Restarted in all the steps
3. Not Solved

Step III:
1. Ran all the different netdiag tests, which passed successfully.
2. Not Solved

Step IV:
1. System Restore
2. Not Solved

Step V:
1. Deleted the Registry Keys 'Winsock' and 'Winsock2'.
2. Restarted the system
3. Installed TCP/IP
4. Not Solved

Step VI:
1. Ran LSPFix.exe from Cexx.org
2. "No Problems Found"
3. Restarted the system
4. Still not solved

Request for your Help!
Regards,
Yagyesh




Yagyesh Sharma March 29th 10 11:55 AM

LAN is working but Internet is not working
 
Thank you very much Bob. But, surprisingly after coming back to office after
the weekend, the Internet has started to work,without me doing any thing!!!
Any ideas as to what could have happened; because, I tried pinging
"www.yahoo.com" many times between the steps followed by me?
Thank you
Yagyesh

"Bob Lin (MS-MVP)" wrote:

Can you ping a public IP address, for example ping 4.2.2.1? If yes, check
the DNS settings. If not, post the result of ipconfig /all here.

--
Bob Lin, Microsoft-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com


"Yagyesh Sharma" wrote in message
...
Hello Everyone,

Problem: I am able to access the computers, and the printers in my
network,
but am unable to browse any website.
Error received: Internet Explorer Cannot display the webpage

Network Setup: I am on a Peer-to-Peer Network with no firewall on the
gateway. The Router is connected to the Network Switch, and my computer is
also connected o the network switch (sae or different switch, and the
network
switches are interconnected).
Information about my Computer: I am running Windows XP Service Pack 3,
with
Internet Explorer 8. I am also running Symantec Endpoint Protection on my
system with Windows Firewall disabled.
Notes: 1. The other computers in the Network are working fine.
2. The Ping to the default gateway (192.168.1.1), 127.0.0.1, localhost,
and
other computers on the network is successful.

STEPS taken by me:-
Step I:
1. Ran - "Diagnose Connection Problems" from inside Internet Explorer 8
2. Error received: "Windows has detected a problem with the Winsock
provider
catalog on this computer.........Would you like Windows to reset the
catalog
to the default configuration?"...
3. Clicked Next to reset the Winsock
4. Restarted the computer
5. Not solved

Step II:
1. Followed the following more ways to reset the winsock:
a. netsh winsock reset (Command Prompt)
b. Microsoft Fixit 50203
c. WinsockXPFix.exe utility by Option^Explicit Software Solutions
2. Restarted in all the steps
3. Not Solved

Step III:
1. Ran all the different netdiag tests, which passed successfully.
2. Not Solved

Step IV:
1. System Restore
2. Not Solved

Step V:
1. Deleted the Registry Keys 'Winsock' and 'Winsock2'.
2. Restarted the system
3. Installed TCP/IP
4. Not Solved

Step VI:
1. Ran LSPFix.exe from Cexx.org
2. "No Problems Found"
3. Restarted the system
4. Still not solved

Request for your Help!
Regards,
Yagyesh




James Egan March 29th 10 01:35 PM

LAN is working but Internet is not working
 

On Mon, 29 Mar 2010 03:55:02 -0700, Yagyesh Sharma
wrote:

Thank you very much Bob. But, surprisingly after coming back to office after
the weekend, the Internet has started to work,without me doing any thing!!!
Any ideas as to what could have happened; because, I tried pinging
"www.yahoo.com" many times between the steps followed by me?


Maybe your Internet service had a temporary outtage. You certainly
wouldn't be the first to experience that..


Jim


James Egan March 29th 10 01:35 PM

LAN is working but Internet is not working
 

On Mon, 29 Mar 2010 03:55:02 -0700, Yagyesh Sharma
wrote:

Thank you very much Bob. But, surprisingly after coming back to office after
the weekend, the Internet has started to work,without me doing any thing!!!
Any ideas as to what could have happened; because, I tried pinging
"www.yahoo.com" many times between the steps followed by me?


Maybe your Internet service had a temporary outtage. You certainly
wouldn't be the first to experience that..


Jim


Yagyesh Sharma April 5th 10 12:48 PM

LAN is working but Internet is not working
 
Thanks Jim

"James Egan" wrote:


On Mon, 29 Mar 2010 03:55:02 -0700, Yagyesh Sharma
wrote:

Thank you very much Bob. But, surprisingly after coming back to office after
the weekend, the Internet has started to work,without me doing any thing!!!
Any ideas as to what could have happened; because, I tried pinging
"www.yahoo.com" many times between the steps followed by me?


Maybe your Internet service had a temporary outtage. You certainly
wouldn't be the first to experience that..


Jim

.


Yagyesh Sharma April 5th 10 12:48 PM

LAN is working but Internet is not working
 
Thanks Jim

"James Egan" wrote:


On Mon, 29 Mar 2010 03:55:02 -0700, Yagyesh Sharma
wrote:

Thank you very much Bob. But, surprisingly after coming back to office after
the weekend, the Internet has started to work,without me doing any thing!!!
Any ideas as to what could have happened; because, I tried pinging
"www.yahoo.com" many times between the steps followed by me?


Maybe your Internet service had a temporary outtage. You certainly
wouldn't be the first to experience that..


Jim

.


JimC April 7th 10 12:46 AM

LAN is working but Internet is not working
 
only reason I can think of, is a problem with your ISP. Perhaps their DNS
servers were temporarily down. It happens - but rarely, so the problem may
not arise again.
Cheers,
Jim


"Yagyesh Sharma" wrote in message
...
Thank you very much Jim. But, surprisingly after coming back to office
after
the weekend, the Internet has started to work,without me doing any
thing!!!
Any ideas as to what could have happened; because, I tried resetting the
adapter many times between the steps followed by me?
Thank you
Yagyesh

"JimC" wrote:

Try using Internet Explorer without add-ons. Go to
StartProgramsAccessoriesSystem Toolschoose Internet Explorer (no
add-ons). If your internet pages now show ok, I suspect you have a
problem
with a plug-in or add-on. Open IE again and then choose ToolsInternet
OptionsAdvanced then choose 'Reset'. This will clear most problems - but
will also clear any saved passwords for websites.

Still trouble? Try disabling the adapter and then re-enabling it- solves
many issues
Failing that open device manager - uninstall the adapter. Then choose
'scan
for hardware changes' - should find the adapter and install
automatically.
Saves a lot of command line work.
Good luck
Jim

"Yagyesh Sharma" wrote in
message
...
Hello Everyone,

Problem: I am able to access the computers, and the printers in my
network,
but am unable to browse any website.
Error received: Internet Explorer Cannot display the webpage

Network Setup: I am on a Peer-to-Peer Network with no firewall on the
gateway. The Router is connected to the Network Switch, and my computer
is
also connected o the network switch (sae or different switch, and the
network
switches are interconnected).
Information about my Computer: I am running Windows XP Service Pack 3,
with
Internet Explorer 8. I am also running Symantec Endpoint Protection on
my
system with Windows Firewall disabled.
Notes: 1. The other computers in the Network are working fine.
2. The Ping to the default gateway (192.168.1.1), 127.0.0.1, localhost,
and
other computers on the network is successful.

STEPS taken by me:-
Step I:
1. Ran - "Diagnose Connection Problems" from inside Internet Explorer 8
2. Error received: "Windows has detected a problem with the Winsock
provider
catalog on this computer.........Would you like Windows to reset the
catalog
to the default configuration?"...
3. Clicked Next to reset the Winsock
4. Restarted the computer
5. Not solved

Step II:
1. Followed the following more ways to reset the winsock:
a. netsh winsock reset (Command Prompt)
b. Microsoft Fixit 50203
c. WinsockXPFix.exe utility by Option^Explicit Software Solutions
2. Restarted in all the steps
3. Not Solved

Step III:
1. Ran all the different netdiag tests, which passed successfully.
2. Not Solved

Step IV:
1. System Restore
2. Not Solved

Step V:
1. Deleted the Registry Keys 'Winsock' and 'Winsock2'.
2. Restarted the system
3. Installed TCP/IP
4. Not Solved

Step VI:
1. Ran LSPFix.exe from Cexx.org
2. "No Problems Found"
3. Restarted the system
4. Still not solved

Request for your Help!
Regards,
Yagyesh





JimC April 7th 10 12:46 AM

LAN is working but Internet is not working
 
only reason I can think of, is a problem with your ISP. Perhaps their DNS
servers were temporarily down. It happens - but rarely, so the problem may
not arise again.
Cheers,
Jim


"Yagyesh Sharma" wrote in message
...
Thank you very much Jim. But, surprisingly after coming back to office
after
the weekend, the Internet has started to work,without me doing any
thing!!!
Any ideas as to what could have happened; because, I tried resetting the
adapter many times between the steps followed by me?
Thank you
Yagyesh

"JimC" wrote:

Try using Internet Explorer without add-ons. Go to
StartProgramsAccessoriesSystem Toolschoose Internet Explorer (no
add-ons). If your internet pages now show ok, I suspect you have a
problem
with a plug-in or add-on. Open IE again and then choose ToolsInternet
OptionsAdvanced then choose 'Reset'. This will clear most problems - but
will also clear any saved passwords for websites.

Still trouble? Try disabling the adapter and then re-enabling it- solves
many issues
Failing that open device manager - uninstall the adapter. Then choose
'scan
for hardware changes' - should find the adapter and install
automatically.
Saves a lot of command line work.
Good luck
Jim

"Yagyesh Sharma" wrote in
message
...
Hello Everyone,

Problem: I am able to access the computers, and the printers in my
network,
but am unable to browse any website.
Error received: Internet Explorer Cannot display the webpage

Network Setup: I am on a Peer-to-Peer Network with no firewall on the
gateway. The Router is connected to the Network Switch, and my computer
is
also connected o the network switch (sae or different switch, and the
network
switches are interconnected).
Information about my Computer: I am running Windows XP Service Pack 3,
with
Internet Explorer 8. I am also running Symantec Endpoint Protection on
my
system with Windows Firewall disabled.
Notes: 1. The other computers in the Network are working fine.
2. The Ping to the default gateway (192.168.1.1), 127.0.0.1, localhost,
and
other computers on the network is successful.

STEPS taken by me:-
Step I:
1. Ran - "Diagnose Connection Problems" from inside Internet Explorer 8
2. Error received: "Windows has detected a problem with the Winsock
provider
catalog on this computer.........Would you like Windows to reset the
catalog
to the default configuration?"...
3. Clicked Next to reset the Winsock
4. Restarted the computer
5. Not solved

Step II:
1. Followed the following more ways to reset the winsock:
a. netsh winsock reset (Command Prompt)
b. Microsoft Fixit 50203
c. WinsockXPFix.exe utility by Option^Explicit Software Solutions
2. Restarted in all the steps
3. Not Solved

Step III:
1. Ran all the different netdiag tests, which passed successfully.
2. Not Solved

Step IV:
1. System Restore
2. Not Solved

Step V:
1. Deleted the Registry Keys 'Winsock' and 'Winsock2'.
2. Restarted the system
3. Installed TCP/IP
4. Not Solved

Step VI:
1. Ran LSPFix.exe from Cexx.org
2. "No Problems Found"
3. Restarted the system
4. Still not solved

Request for your Help!
Regards,
Yagyesh






All times are GMT +1. The time now is 04:19 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 2004 - 2006 PCbanter
Comments are property of their posters