PCbanter

PCbanter (http://www.pcbanter.net/index.php)
-   Customizing Windows XP (http://www.pcbanter.net/forumdisplay.php?f=36)
-   -   memory exception error (http://www.pcbanter.net/showthread.php?t=1068672)

John Callaway May 16th 10 03:25 PM

memory exception error
 
From time to time I get a memory exception error. What is it & what
should do about it? (XP SP2)

JPC

Shenan Stanley May 16th 10 04:37 PM

memory exception error
 
John Callaway wrote:
From time to time I get a memory exception error. What is it & what
should do about it? (XP SP2)


Doing what? Running what?

Why Windows XP Service Pack 2? SP3 has been out for years.
Is it 32 or 64 bit Windows XP?
Windows XP Home or Professional or Media Center or other?

Can you be MUCH more specific about the error?

--
Shenan Stanley
MS-MVP
--
How To Ask Questions The Smart Way
http://www.catb.org/~esr/faqs/smart-questions.html



Shenan Stanley May 16th 10 04:37 PM

memory exception error
 

John Callaway wrote:
From time to time I get a memory exception error. What is it & what
should do about it? (XP SP2)


Doing what? Running what?

Why Windows XP Service Pack 2? SP3 has been out for years.
Is it 32 or 64 bit Windows XP?
Windows XP Home or Professional or Media Center or other?

Can you be MUCH more specific about the error?

--
Shenan Stanley
MS-MVP
--
How To Ask Questions The Smart Way
http://www.catb.org/~esr/faqs/smart-questions.html



John Callaway May 16th 10 05:33 PM

memory exception error
 
XP Professional 32 bit. Have had trouble updating to SP3.

JPC

On Sun, 16 May 2010 10:37:41 -0500, "Shenan Stanley"
wrote:


John Callaway wrote:
From time to time I get a memory exception error. What is it & what
should do about it? (XP SP2)


Doing what? Running what?

Why Windows XP Service Pack 2? SP3 has been out for years.
Is it 32 or 64 bit Windows XP?
Windows XP Home or Professional or Media Center or other?

Can you be MUCH more specific about the error?

--
Shenan Stanley
MS-MVP



John Callaway May 16th 10 05:33 PM

memory exception error
 
XP Professional 32 bit. Have had trouble updating to SP3.

JPC

On Sun, 16 May 2010 10:37:41 -0500, "Shenan Stanley"
wrote:


John Callaway wrote:
From time to time I get a memory exception error. What is it & what
should do about it? (XP SP2)


Doing what? Running what?

Why Windows XP Service Pack 2? SP3 has been out for years.
Is it 32 or 64 bit Windows XP?
Windows XP Home or Professional or Media Center or other?

Can you be MUCH more specific about the error?

--
Shenan Stanley
MS-MVP



Tim Meddick[_3_] May 16th 10 09:58 PM

memory exception error
 
The most important thing to include, when asking for advice on an error
message, is it's identifying error code and exact description.

Not allot can be done for you without it.

Plus, including details of what exactly you were doing at the time, may
also be helpful...

==

Cheers, Tim Meddick, Peckham, London. :-)




"John Callaway" wrote in message
...
XP Professional 32 bit. Have had trouble updating to SP3.

JPC

On Sun, 16 May 2010 10:37:41 -0500, "Shenan Stanley"
wrote:


John Callaway wrote:
From time to time I get a memory exception error. What is it & what
should do about it? (XP SP2)


Doing what? Running what?

Why Windows XP Service Pack 2? SP3 has been out for years.
Is it 32 or 64 bit Windows XP?
Windows XP Home or Professional or Media Center or other?

Can you be MUCH more specific about the error?

--
Shenan Stanley
MS-MVP




Tim Meddick[_3_] May 16th 10 09:58 PM

memory exception error
 
The most important thing to include, when asking for advice on an error
message, is it's identifying error code and exact description.

Not allot can be done for you without it.

Plus, including details of what exactly you were doing at the time, may
also be helpful...

==

Cheers, Tim Meddick, Peckham, London. :-)




"John Callaway" wrote in message
...
XP Professional 32 bit. Have had trouble updating to SP3.

JPC

On Sun, 16 May 2010 10:37:41 -0500, "Shenan Stanley"
wrote:


John Callaway wrote:
From time to time I get a memory exception error. What is it & what
should do about it? (XP SP2)


Doing what? Running what?

Why Windows XP Service Pack 2? SP3 has been out for years.
Is it 32 or 64 bit Windows XP?
Windows XP Home or Professional or Media Center or other?

Can you be MUCH more specific about the error?

--
Shenan Stanley
MS-MVP




Shenan Stanley May 16th 10 09:59 PM

memory exception error
 
John Callaway wrote:
XP Professional 32 bit. Have had trouble updating to SP3.


That's it, eh?
Out of all the questions, that is what you will give?

No specific memory error information (what it says, executable(s) it refers
to)?

Nothing that you have tried? (Scanned your memory for errors maybe?)

Not a hint of what you are running/have just done when you get the error
and/or what applications are running at all times on your machine that might
cause it?

Okay - we'll work with just that. I think, if you have had trouble
installing SP3, you will benefit from cleaning up the system and getting
that installed. Who knows - something you clean up may repair the problem
you are having.

Here's my suggestion - it's a procedure, not a 'do this and try again, if
that doesn't work, do this and try again' - but a 'do this, this, this,
this, this and this and then try' thing. Long, easy, but time consuming.
If nothing else, you will end up with a cleaner system and a lot of possible
issues will be eliminated.

This question has to do with what type of computer you own and what type
of processor it has. It's pretty straight forward: Is it an HP branded
computer and does it have an AMD processor installed?

If the answer to BOTH of those is YES, then you need to prevent a known
issue with that combination using the following instructions:
http://h10025.www1.hp.com:80/ewfrf/w...tem=pv-60484-2

If the answer to EITHER of those is NO, then you are generally safe in
continuing on. But either way - answer back here so everyone can know
what you are doing/what you have step-by-excruciating-step.

What version of Internet Explorer are you currently using? Easy to find
out. Open Internet Explorer and while that is in-focus, press and hold
the "ALT" key on your keyboard. With the "ALT" key still pressed, press
(just once, no holding) the "H" key. Now, with the "ALT" key still
pressed, press (just once, no holding) the "A" key. That will bring up
the "About Internet Explorer" window. It will give you the exact version
you are using - repeat what you see there in response to this message.

Now that we have some base information, let's cleanup and get ready to
install Windows XP SP3 onto your Windows XP system.

Reboot so you start with a fresh machine. For everything here you will
need to logon as an user with administrative (installation) priviledges.

Fix your file/registry permissions...

Ignore the title and follow the sub-section under
"Advanced Troubleshooting" titled,
"Method 1: Reset the registry and the file permissions"
http://support.microsoft.com/kb/949377
*will take time
** Ignore the last step (6) - you'll install SP3 shortly, but not now.

You will likely see errors pass by if you watching, even count up. No
worries *at this time*.

*After* that is done, continue on to the next part where you clean off
some excess (unnecessary) files. It only removes those you definitely
do not need, if you follow the directions *as given* and do not deviate.
So reboot (for each of these steps, it is just best to reboot right
before - but I will continue to point that out) and logon as an user with
administrative priviledges.

Download/install the "Windows Installer CleanUp Utility":
http://support.microsoft.com/kb/290301

After installing, do the following:

Start button -- RUN
(no "RUN"? Press the "Windows Key" + R on your keyboard)
-- type in:
"%ProgramFiles%\Windows Installer Clean Up\msizap.exe" g!
-- Click OK.
(The quotation marks and percentage signs and spacing should be exact.)

It will flash by *quick*, don't expect much out of this step to get
excited about. But the cleaner your machine is to start with, the
better your luck will be later (not really luck - more like preparedness,
but that's not as fun to think about, eh?)

Yeah - you will get tired of rebooting - but let's soldier on and reboot
again and logon as an user with administrative priviledges.

This time (and this is one of the more time-consuming steps) you will be
running (one at a time with reboots in-between each) three different
anti-spyware/anti-malware applications to ensure you come up clean.

Download, install, run, update and perform a full scan with the following
(freeware version):

SuperAntiSpyware
http://www.superantispyware.com/

Reboot and logon as administrative user.

Download, install, run, update and perform a full scan with the following
(freeware version):

MalwareBytes
http://www.malwarebytes.com/

Reboot and logon as administrative user.

Download and run the MSRT manually:
http://www.microsoft.com/security/ma...e/default.mspx

You may find nothing, you may find only cookies, you may think it is a
waste of time - but if you do all this and report back here with what you
do/don't find as you are doing all of it - you are adding more pieces to
the puzzle and the entire picture just may become clearer and your
problem resolved.

Reboot and logon as administrative user.

Download/Install the latest Windows Installer (for your OS):
( Windows XP 32-bit : WindowsXP-KB942288-v3-x86.exe )
http://www.microsoft.com/downloadS/d...displaylang=en

Reboot and logon as administrative user.

Download the latest version of the Windows Update agent from here (x86):
http://go.microsoft.com/fwlink/?LinkID=91237
.... and save it to the root of your C:\ drive. After saving it to the
root of the C:\ drive, do the following:

Close all Internet Explorer windows and other applications.

Start button -- RUN and type in:
%SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
-- Click OK.

(If asked, select "Run.) -- Click on NEXT -- Select "I agree" and click on
NEXT -- When it finishes installing, click on "Finish"...

Reboot and logon as administrative user.

Visit this web page:

How do I reset Windows Update components?
http://support.microsoft.com/kb/971058

.... and click on the "Microsoft Fix it" icon. When asked, select "RUN",
both times. Check the "I agree" box and click on "Next". Check the box
for "Run aggressive options (not recommended)" and click "Next". Let
it finish up and follow the prompts until it is done. Close/exit and
reboot when it is.

Now for SP3...

Download the full SP3 installation file.

Windows XP Service Pack 3 Network Installation Package for
IT Professionals and Developers (works just as well for you.)
http://www.microsoft.com/downloads/d...8-1E1555D4F3D4

You are just saving it right now - not running it yet. There will be no
file size deviation - it is 316.4MB.

You should now perform a full CHKDSK on your system drive (C:)...

How to scan your disks for errors
http://support.microsoft.com/kb/315265
* will take time and a reboot

You should now perform a full Defragment on your system drive (C:)...

How to Defragment your hard drives
http://support.microsoft.com/kb/314848
* will take time

Reboot right before you try to install SP3.

Disconnect from the internet before installing (physically disconnect -
pull the network cable or disable the router/modem.)

Uninstall any and all third-party firewall applications (ZoneAlarm, etc)
and utilize the built-in WIndows Firewall only.

Disable your antivirus and antispyware applications when you are about to
install SP3. Usually right-click on the icon in the taskbar gives you
a choice to do so.

Install SP3 by running the downloaded executable.

Reboot when requested to do so.

Logon and let the machine 'settle' for about 10 minutes.

Reboot.

Give it 5 minutes after logon to 'settle' - reboot.

After that - there will be more updates.

Log on as an user with administrative rights and open Internet Explorer
and visit http://windowsupdate.microsoft.com/ and select to do a
CUSTOM scan...

Every time you are about to click on something while at these web pages -
first press and hold down the CTRL key while you click on it. You can
release the CTRL key after clicking each time.

Once the scan is done, select just _ONE_ of the high priority updates
(deselect any others) and install it.

Reboot again.

If it did work - try the web page again - selecting no more than 3-5 at a
time. Rebooting as needed.

The Optional Software updates are generally safe - although I recommend
against the "Windows Search" one and any of the "Office Live" ones or
"Windows Live" ones for now. I would completely avoid the
Optional Hardware updates. Also - I do not see any urgent need to
install Internet Explorer 8 at this time.

Seriously - do all that. This is like antibiotics - don't skip a single
step, don't quit because you think things will be okay now - go through
until the end, until you have done everything given in the order given. If
you have a problem with a step come ask and let someone here get you
through that step. If you don't understand how to do a step, come back
and ask here about that step and let someone walk you through it.

Then - when done - let everyone here know if it worked for you - or if
you have more issues.

--
Shenan Stanley
MS-MVP
--
How To Ask Questions The Smart Way
http://www.catb.org/~esr/faqs/smart-questions.html



Shenan Stanley May 16th 10 09:59 PM

memory exception error
 
John Callaway wrote:
XP Professional 32 bit. Have had trouble updating to SP3.


That's it, eh?
Out of all the questions, that is what you will give?

No specific memory error information (what it says, executable(s) it refers
to)?

Nothing that you have tried? (Scanned your memory for errors maybe?)

Not a hint of what you are running/have just done when you get the error
and/or what applications are running at all times on your machine that might
cause it?

Okay - we'll work with just that. I think, if you have had trouble
installing SP3, you will benefit from cleaning up the system and getting
that installed. Who knows - something you clean up may repair the problem
you are having.

Here's my suggestion - it's a procedure, not a 'do this and try again, if
that doesn't work, do this and try again' - but a 'do this, this, this,
this, this and this and then try' thing. Long, easy, but time consuming.
If nothing else, you will end up with a cleaner system and a lot of possible
issues will be eliminated.

This question has to do with what type of computer you own and what type
of processor it has. It's pretty straight forward: Is it an HP branded
computer and does it have an AMD processor installed?

If the answer to BOTH of those is YES, then you need to prevent a known
issue with that combination using the following instructions:
http://h10025.www1.hp.com:80/ewfrf/w...tem=pv-60484-2

If the answer to EITHER of those is NO, then you are generally safe in
continuing on. But either way - answer back here so everyone can know
what you are doing/what you have step-by-excruciating-step.

What version of Internet Explorer are you currently using? Easy to find
out. Open Internet Explorer and while that is in-focus, press and hold
the "ALT" key on your keyboard. With the "ALT" key still pressed, press
(just once, no holding) the "H" key. Now, with the "ALT" key still
pressed, press (just once, no holding) the "A" key. That will bring up
the "About Internet Explorer" window. It will give you the exact version
you are using - repeat what you see there in response to this message.

Now that we have some base information, let's cleanup and get ready to
install Windows XP SP3 onto your Windows XP system.

Reboot so you start with a fresh machine. For everything here you will
need to logon as an user with administrative (installation) priviledges.

Fix your file/registry permissions...

Ignore the title and follow the sub-section under
"Advanced Troubleshooting" titled,
"Method 1: Reset the registry and the file permissions"
http://support.microsoft.com/kb/949377
*will take time
** Ignore the last step (6) - you'll install SP3 shortly, but not now.

You will likely see errors pass by if you watching, even count up. No
worries *at this time*.

*After* that is done, continue on to the next part where you clean off
some excess (unnecessary) files. It only removes those you definitely
do not need, if you follow the directions *as given* and do not deviate.
So reboot (for each of these steps, it is just best to reboot right
before - but I will continue to point that out) and logon as an user with
administrative priviledges.

Download/install the "Windows Installer CleanUp Utility":
http://support.microsoft.com/kb/290301

After installing, do the following:

Start button -- RUN
(no "RUN"? Press the "Windows Key" + R on your keyboard)
-- type in:
"%ProgramFiles%\Windows Installer Clean Up\msizap.exe" g!
-- Click OK.
(The quotation marks and percentage signs and spacing should be exact.)

It will flash by *quick*, don't expect much out of this step to get
excited about. But the cleaner your machine is to start with, the
better your luck will be later (not really luck - more like preparedness,
but that's not as fun to think about, eh?)

Yeah - you will get tired of rebooting - but let's soldier on and reboot
again and logon as an user with administrative priviledges.

This time (and this is one of the more time-consuming steps) you will be
running (one at a time with reboots in-between each) three different
anti-spyware/anti-malware applications to ensure you come up clean.

Download, install, run, update and perform a full scan with the following
(freeware version):

SuperAntiSpyware
http://www.superantispyware.com/

Reboot and logon as administrative user.

Download, install, run, update and perform a full scan with the following
(freeware version):

MalwareBytes
http://www.malwarebytes.com/

Reboot and logon as administrative user.

Download and run the MSRT manually:
http://www.microsoft.com/security/ma...e/default.mspx

You may find nothing, you may find only cookies, you may think it is a
waste of time - but if you do all this and report back here with what you
do/don't find as you are doing all of it - you are adding more pieces to
the puzzle and the entire picture just may become clearer and your
problem resolved.

Reboot and logon as administrative user.

Download/Install the latest Windows Installer (for your OS):
( Windows XP 32-bit : WindowsXP-KB942288-v3-x86.exe )
http://www.microsoft.com/downloadS/d...displaylang=en

Reboot and logon as administrative user.

Download the latest version of the Windows Update agent from here (x86):
http://go.microsoft.com/fwlink/?LinkID=91237
.... and save it to the root of your C:\ drive. After saving it to the
root of the C:\ drive, do the following:

Close all Internet Explorer windows and other applications.

Start button -- RUN and type in:
%SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
-- Click OK.

(If asked, select "Run.) -- Click on NEXT -- Select "I agree" and click on
NEXT -- When it finishes installing, click on "Finish"...

Reboot and logon as administrative user.

Visit this web page:

How do I reset Windows Update components?
http://support.microsoft.com/kb/971058

.... and click on the "Microsoft Fix it" icon. When asked, select "RUN",
both times. Check the "I agree" box and click on "Next". Check the box
for "Run aggressive options (not recommended)" and click "Next". Let
it finish up and follow the prompts until it is done. Close/exit and
reboot when it is.

Now for SP3...

Download the full SP3 installation file.

Windows XP Service Pack 3 Network Installation Package for
IT Professionals and Developers (works just as well for you.)
http://www.microsoft.com/downloads/d...8-1E1555D4F3D4

You are just saving it right now - not running it yet. There will be no
file size deviation - it is 316.4MB.

You should now perform a full CHKDSK on your system drive (C:)...

How to scan your disks for errors
http://support.microsoft.com/kb/315265
* will take time and a reboot

You should now perform a full Defragment on your system drive (C:)...

How to Defragment your hard drives
http://support.microsoft.com/kb/314848
* will take time

Reboot right before you try to install SP3.

Disconnect from the internet before installing (physically disconnect -
pull the network cable or disable the router/modem.)

Uninstall any and all third-party firewall applications (ZoneAlarm, etc)
and utilize the built-in WIndows Firewall only.

Disable your antivirus and antispyware applications when you are about to
install SP3. Usually right-click on the icon in the taskbar gives you
a choice to do so.

Install SP3 by running the downloaded executable.

Reboot when requested to do so.

Logon and let the machine 'settle' for about 10 minutes.

Reboot.

Give it 5 minutes after logon to 'settle' - reboot.

After that - there will be more updates.

Log on as an user with administrative rights and open Internet Explorer
and visit http://windowsupdate.microsoft.com/ and select to do a
CUSTOM scan...

Every time you are about to click on something while at these web pages -
first press and hold down the CTRL key while you click on it. You can
release the CTRL key after clicking each time.

Once the scan is done, select just _ONE_ of the high priority updates
(deselect any others) and install it.

Reboot again.

If it did work - try the web page again - selecting no more than 3-5 at a
time. Rebooting as needed.

The Optional Software updates are generally safe - although I recommend
against the "Windows Search" one and any of the "Office Live" ones or
"Windows Live" ones for now. I would completely avoid the
Optional Hardware updates. Also - I do not see any urgent need to
install Internet Explorer 8 at this time.

Seriously - do all that. This is like antibiotics - don't skip a single
step, don't quit because you think things will be okay now - go through
until the end, until you have done everything given in the order given. If
you have a problem with a step come ask and let someone here get you
through that step. If you don't understand how to do a step, come back
and ask here about that step and let someone walk you through it.

Then - when done - let everyone here know if it worked for you - or if
you have more issues.

--
Shenan Stanley
MS-MVP
--
How To Ask Questions The Smart Way
http://www.catb.org/~esr/faqs/smart-questions.html



Leonard Grey[_3_] May 17th 10 02:16 AM

memory exception error
 
Of course, everyone knows exactly what "memory exception error"
means...no need to explain.
---
Leonard Grey
Errare humanum est

John Callaway wrote:
From time to time I get a memory exception error. What is it & what
should do about it? (XP SP2)

JPC


Leonard Grey[_3_] May 17th 10 02:16 AM

memory exception error
 
Of course, everyone knows exactly what "memory exception error"
means...no need to explain.
---
Leonard Grey
Errare humanum est

John Callaway wrote:
From time to time I get a memory exception error. What is it & what
should do about it? (XP SP2)

JPC


John Callaway May 17th 10 02:28 AM

memory exception error - tut system.doc (0/1)
 
Here is more info on my computer. I run Firefox browser.

I tried to attach a file with all my system settings. I don't know if
it will come through. Attached file name is Tut system.doc

JPC

On Sun, 16 May 2010 15:59:20 -0500, "Shenan Stanley"
wrote:

John Callaway wrote:
XP Professional 32 bit. Have had trouble updating to SP3.


That's it, eh?
Out of all the questions, that is what you will give?

No specific memory error information (what it says, executable(s) it refers
to)?

Nothing that you have tried? (Scanned your memory for errors maybe?)

Not a hint of what you are running/have just done when you get the error
and/or what applications are running at all times on your machine that might
cause it?

Okay - we'll work with just that. I think, if you have had trouble
installing SP3, you will benefit from cleaning up the system and getting
that installed. Who knows - something you clean up may repair the problem
you are having.

Here's my suggestion - it's a procedure, not a 'do this and try again, if
that doesn't work, do this and try again' - but a 'do this, this, this,
this, this and this and then try' thing. Long, easy, but time consuming.
If nothing else, you will end up with a cleaner system and a lot of possible
issues will be eliminated.

This question has to do with what type of computer you own and what type
of processor it has. It's pretty straight forward: Is it an HP branded
computer and does it have an AMD processor installed?

If the answer to BOTH of those is YES, then you need to prevent a known
issue with that combination using the following instructions:
http://h10025.www1.hp.com:80/ewfrf/w...tem=pv-60484-2

If the answer to EITHER of those is NO, then you are generally safe in
continuing on. But either way - answer back here so everyone can know
what you are doing/what you have step-by-excruciating-step.

What version of Internet Explorer are you currently using? Easy to find
out. Open Internet Explorer and while that is in-focus, press and hold
the "ALT" key on your keyboard. With the "ALT" key still pressed, press
(just once, no holding) the "H" key. Now, with the "ALT" key still
pressed, press (just once, no holding) the "A" key. That will bring up
the "About Internet Explorer" window. It will give you the exact version
you are using - repeat what you see there in response to this message.

Now that we have some base information, let's cleanup and get ready to
install Windows XP SP3 onto your Windows XP system.

Reboot so you start with a fresh machine. For everything here you will
need to logon as an user with administrative (installation) priviledges.

Fix your file/registry permissions...

Ignore the title and follow the sub-section under
"Advanced Troubleshooting" titled,
"Method 1: Reset the registry and the file permissions"
http://support.microsoft.com/kb/949377
*will take time
** Ignore the last step (6) - you'll install SP3 shortly, but not now.

You will likely see errors pass by if you watching, even count up. No
worries *at this time*.

*After* that is done, continue on to the next part where you clean off
some excess (unnecessary) files. It only removes those you definitely
do not need, if you follow the directions *as given* and do not deviate.
So reboot (for each of these steps, it is just best to reboot right
before - but I will continue to point that out) and logon as an user with
administrative priviledges.

Download/install the "Windows Installer CleanUp Utility":
http://support.microsoft.com/kb/290301

After installing, do the following:

Start button -- RUN
(no "RUN"? Press the "Windows Key" + R on your keyboard)
-- type in:
"%ProgramFiles%\Windows Installer Clean Up\msizap.exe" g!
-- Click OK.
(The quotation marks and percentage signs and spacing should be exact.)

It will flash by *quick*, don't expect much out of this step to get
excited about. But the cleaner your machine is to start with, the
better your luck will be later (not really luck - more like preparedness,
but that's not as fun to think about, eh?)

Yeah - you will get tired of rebooting - but let's soldier on and reboot
again and logon as an user with administrative priviledges.

This time (and this is one of the more time-consuming steps) you will be
running (one at a time with reboots in-between each) three different
anti-spyware/anti-malware applications to ensure you come up clean.

Download, install, run, update and perform a full scan with the following
(freeware version):

SuperAntiSpyware
http://www.superantispyware.com/

Reboot and logon as administrative user.

Download, install, run, update and perform a full scan with the following
(freeware version):

MalwareBytes
http://www.malwarebytes.com/

Reboot and logon as administrative user.

Download and run the MSRT manually:
http://www.microsoft.com/security/ma...e/default.mspx

You may find nothing, you may find only cookies, you may think it is a
waste of time - but if you do all this and report back here with what you
do/don't find as you are doing all of it - you are adding more pieces to
the puzzle and the entire picture just may become clearer and your
problem resolved.

Reboot and logon as administrative user.

Download/Install the latest Windows Installer (for your OS):
( Windows XP 32-bit : WindowsXP-KB942288-v3-x86.exe )
http://www.microsoft.com/downloadS/d...displaylang=en

Reboot and logon as administrative user.

Download the latest version of the Windows Update agent from here (x86):
http://go.microsoft.com/fwlink/?LinkID=91237
... and save it to the root of your C:\ drive. After saving it to the
root of the C:\ drive, do the following:

Close all Internet Explorer windows and other applications.

Start button -- RUN and type in:
%SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
-- Click OK.

(If asked, select "Run.) -- Click on NEXT -- Select "I agree" and click on
NEXT -- When it finishes installing, click on "Finish"...

Reboot and logon as administrative user.

Visit this web page:

How do I reset Windows Update components?
http://support.microsoft.com/kb/971058

... and click on the "Microsoft Fix it" icon. When asked, select "RUN",
both times. Check the "I agree" box and click on "Next". Check the box
for "Run aggressive options (not recommended)" and click "Next". Let
it finish up and follow the prompts until it is done. Close/exit and
reboot when it is.

Now for SP3...

Download the full SP3 installation file.

Windows XP Service Pack 3 Network Installation Package for
IT Professionals and Developers (works just as well for you.)
http://www.microsoft.com/downloads/d...8-1E1555D4F3D4

You are just saving it right now - not running it yet. There will be no
file size deviation - it is 316.4MB.

You should now perform a full CHKDSK on your system drive (C:)...

How to scan your disks for errors
http://support.microsoft.com/kb/315265
* will take time and a reboot

You should now perform a full Defragment on your system drive (C:)...

How to Defragment your hard drives
http://support.microsoft.com/kb/314848
* will take time

Reboot right before you try to install SP3.

Disconnect from the internet before installing (physically disconnect -
pull the network cable or disable the router/modem.)

Uninstall any and all third-party firewall applications (ZoneAlarm, etc)
and utilize the built-in WIndows Firewall only.

Disable your antivirus and antispyware applications when you are about to
install SP3. Usually right-click on the icon in the taskbar gives you
a choice to do so.

Install SP3 by running the downloaded executable.

Reboot when requested to do so.

Logon and let the machine 'settle' for about 10 minutes.

Reboot.

Give it 5 minutes after logon to 'settle' - reboot.

After that - there will be more updates.

Log on as an user with administrative rights and open Internet Explorer
and visit http://windowsupdate.microsoft.com/ and select to do a
CUSTOM scan...

Every time you are about to click on something while at these web pages -
first press and hold down the CTRL key while you click on it. You can
release the CTRL key after clicking each time.

Once the scan is done, select just _ONE_ of the high priority updates
(deselect any others) and install it.

Reboot again.

If it did work - try the web page again - selecting no more than 3-5 at a
time. Rebooting as needed.

The Optional Software updates are generally safe - although I recommend
against the "Windows Search" one and any of the "Office Live" ones or
"Windows Live" ones for now. I would completely avoid the
Optional Hardware updates. Also - I do not see any urgent need to
install Internet Explorer 8 at this time.

Seriously - do all that. This is like antibiotics - don't skip a single
step, don't quit because you think things will be okay now - go through
until the end, until you have done everything given in the order given. If
you have a problem with a step come ask and let someone here get you
through that step. If you don't understand how to do a step, come back
and ask here about that step and let someone walk you through it.

Then - when done - let everyone here know if it worked for you - or if
you have more issues.

--
Shenan Stanley
MS-MVP



John Callaway May 17th 10 02:28 AM

memory exception error - tut system.doc (0/1)
 
Here is more info on my computer. I run Firefox browser.

I tried to attach a file with all my system settings. I don't know if
it will come through. Attached file name is Tut system.doc

JPC

On Sun, 16 May 2010 15:59:20 -0500, "Shenan Stanley"
wrote:

John Callaway wrote:
XP Professional 32 bit. Have had trouble updating to SP3.


That's it, eh?
Out of all the questions, that is what you will give?

No specific memory error information (what it says, executable(s) it refers
to)?

Nothing that you have tried? (Scanned your memory for errors maybe?)

Not a hint of what you are running/have just done when you get the error
and/or what applications are running at all times on your machine that might
cause it?

Okay - we'll work with just that. I think, if you have had trouble
installing SP3, you will benefit from cleaning up the system and getting
that installed. Who knows - something you clean up may repair the problem
you are having.

Here's my suggestion - it's a procedure, not a 'do this and try again, if
that doesn't work, do this and try again' - but a 'do this, this, this,
this, this and this and then try' thing. Long, easy, but time consuming.
If nothing else, you will end up with a cleaner system and a lot of possible
issues will be eliminated.

This question has to do with what type of computer you own and what type
of processor it has. It's pretty straight forward: Is it an HP branded
computer and does it have an AMD processor installed?

If the answer to BOTH of those is YES, then you need to prevent a known
issue with that combination using the following instructions:
http://h10025.www1.hp.com:80/ewfrf/w...tem=pv-60484-2

If the answer to EITHER of those is NO, then you are generally safe in
continuing on. But either way - answer back here so everyone can know
what you are doing/what you have step-by-excruciating-step.

What version of Internet Explorer are you currently using? Easy to find
out. Open Internet Explorer and while that is in-focus, press and hold
the "ALT" key on your keyboard. With the "ALT" key still pressed, press
(just once, no holding) the "H" key. Now, with the "ALT" key still
pressed, press (just once, no holding) the "A" key. That will bring up
the "About Internet Explorer" window. It will give you the exact version
you are using - repeat what you see there in response to this message.

Now that we have some base information, let's cleanup and get ready to
install Windows XP SP3 onto your Windows XP system.

Reboot so you start with a fresh machine. For everything here you will
need to logon as an user with administrative (installation) priviledges.

Fix your file/registry permissions...

Ignore the title and follow the sub-section under
"Advanced Troubleshooting" titled,
"Method 1: Reset the registry and the file permissions"
http://support.microsoft.com/kb/949377
*will take time
** Ignore the last step (6) - you'll install SP3 shortly, but not now.

You will likely see errors pass by if you watching, even count up. No
worries *at this time*.

*After* that is done, continue on to the next part where you clean off
some excess (unnecessary) files. It only removes those you definitely
do not need, if you follow the directions *as given* and do not deviate.
So reboot (for each of these steps, it is just best to reboot right
before - but I will continue to point that out) and logon as an user with
administrative priviledges.

Download/install the "Windows Installer CleanUp Utility":
http://support.microsoft.com/kb/290301

After installing, do the following:

Start button -- RUN
(no "RUN"? Press the "Windows Key" + R on your keyboard)
-- type in:
"%ProgramFiles%\Windows Installer Clean Up\msizap.exe" g!
-- Click OK.
(The quotation marks and percentage signs and spacing should be exact.)

It will flash by *quick*, don't expect much out of this step to get
excited about. But the cleaner your machine is to start with, the
better your luck will be later (not really luck - more like preparedness,
but that's not as fun to think about, eh?)

Yeah - you will get tired of rebooting - but let's soldier on and reboot
again and logon as an user with administrative priviledges.

This time (and this is one of the more time-consuming steps) you will be
running (one at a time with reboots in-between each) three different
anti-spyware/anti-malware applications to ensure you come up clean.

Download, install, run, update and perform a full scan with the following
(freeware version):

SuperAntiSpyware
http://www.superantispyware.com/

Reboot and logon as administrative user.

Download, install, run, update and perform a full scan with the following
(freeware version):

MalwareBytes
http://www.malwarebytes.com/

Reboot and logon as administrative user.

Download and run the MSRT manually:
http://www.microsoft.com/security/ma...e/default.mspx

You may find nothing, you may find only cookies, you may think it is a
waste of time - but if you do all this and report back here with what you
do/don't find as you are doing all of it - you are adding more pieces to
the puzzle and the entire picture just may become clearer and your
problem resolved.

Reboot and logon as administrative user.

Download/Install the latest Windows Installer (for your OS):
( Windows XP 32-bit : WindowsXP-KB942288-v3-x86.exe )
http://www.microsoft.com/downloadS/d...displaylang=en

Reboot and logon as administrative user.

Download the latest version of the Windows Update agent from here (x86):
http://go.microsoft.com/fwlink/?LinkID=91237
... and save it to the root of your C:\ drive. After saving it to the
root of the C:\ drive, do the following:

Close all Internet Explorer windows and other applications.

Start button -- RUN and type in:
%SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
-- Click OK.

(If asked, select "Run.) -- Click on NEXT -- Select "I agree" and click on
NEXT -- When it finishes installing, click on "Finish"...

Reboot and logon as administrative user.

Visit this web page:

How do I reset Windows Update components?
http://support.microsoft.com/kb/971058

... and click on the "Microsoft Fix it" icon. When asked, select "RUN",
both times. Check the "I agree" box and click on "Next". Check the box
for "Run aggressive options (not recommended)" and click "Next". Let
it finish up and follow the prompts until it is done. Close/exit and
reboot when it is.

Now for SP3...

Download the full SP3 installation file.

Windows XP Service Pack 3 Network Installation Package for
IT Professionals and Developers (works just as well for you.)
http://www.microsoft.com/downloads/d...8-1E1555D4F3D4

You are just saving it right now - not running it yet. There will be no
file size deviation - it is 316.4MB.

You should now perform a full CHKDSK on your system drive (C:)...

How to scan your disks for errors
http://support.microsoft.com/kb/315265
* will take time and a reboot

You should now perform a full Defragment on your system drive (C:)...

How to Defragment your hard drives
http://support.microsoft.com/kb/314848
* will take time

Reboot right before you try to install SP3.

Disconnect from the internet before installing (physically disconnect -
pull the network cable or disable the router/modem.)

Uninstall any and all third-party firewall applications (ZoneAlarm, etc)
and utilize the built-in WIndows Firewall only.

Disable your antivirus and antispyware applications when you are about to
install SP3. Usually right-click on the icon in the taskbar gives you
a choice to do so.

Install SP3 by running the downloaded executable.

Reboot when requested to do so.

Logon and let the machine 'settle' for about 10 minutes.

Reboot.

Give it 5 minutes after logon to 'settle' - reboot.

After that - there will be more updates.

Log on as an user with administrative rights and open Internet Explorer
and visit http://windowsupdate.microsoft.com/ and select to do a
CUSTOM scan...

Every time you are about to click on something while at these web pages -
first press and hold down the CTRL key while you click on it. You can
release the CTRL key after clicking each time.

Once the scan is done, select just _ONE_ of the high priority updates
(deselect any others) and install it.

Reboot again.

If it did work - try the web page again - selecting no more than 3-5 at a
time. Rebooting as needed.

The Optional Software updates are generally safe - although I recommend
against the "Windows Search" one and any of the "Office Live" ones or
"Windows Live" ones for now. I would completely avoid the
Optional Hardware updates. Also - I do not see any urgent need to
install Internet Explorer 8 at this time.

Seriously - do all that. This is like antibiotics - don't skip a single
step, don't quit because you think things will be okay now - go through
until the end, until you have done everything given in the order given. If
you have a problem with a step come ask and let someone here get you
through that step. If you don't understand how to do a step, come back
and ask here about that step and let someone walk you through it.

Then - when done - let everyone here know if it worked for you - or if
you have more issues.

--
Shenan Stanley
MS-MVP



John Callaway May 17th 10 02:36 AM

memory exception error
 
I have Firefox browser. I have not been able to update to SP3.

JPC

On Sun, 16 May 2010 15:59:20 -0500, "Shenan Stanley"
wrote:

John Callaway wrote:
XP Professional 32 bit. Have had trouble updating to SP3.


That's it, eh?
Out of all the questions, that is what you will give?

No specific memory error information (what it says, executable(s) it refers
to)?

Nothing that you have tried? (Scanned your memory for errors maybe?)

Not a hint of what you are running/have just done when you get the error
and/or what applications are running at all times on your machine that might
cause it?

Okay - we'll work with just that. I think, if you have had trouble
installing SP3, you will benefit from cleaning up the system and getting
that installed. Who knows - something you clean up may repair the problem
you are having.

Here's my suggestion - it's a procedure, not a 'do this and try again, if
that doesn't work, do this and try again' - but a 'do this, this, this,
this, this and this and then try' thing. Long, easy, but time consuming.
If nothing else, you will end up with a cleaner system and a lot of possible
issues will be eliminated.

This question has to do with what type of computer you own and what type
of processor it has. It's pretty straight forward: Is it an HP branded
computer and does it have an AMD processor installed?

If the answer to BOTH of those is YES, then you need to prevent a known
issue with that combination using the following instructions:
http://h10025.www1.hp.com:80/ewfrf/w...tem=pv-60484-2

If the answer to EITHER of those is NO, then you are generally safe in
continuing on. But either way - answer back here so everyone can know
what you are doing/what you have step-by-excruciating-step.

What version of Internet Explorer are you currently using? Easy to find
out. Open Internet Explorer and while that is in-focus, press and hold
the "ALT" key on your keyboard. With the "ALT" key still pressed, press
(just once, no holding) the "H" key. Now, with the "ALT" key still
pressed, press (just once, no holding) the "A" key. That will bring up
the "About Internet Explorer" window. It will give you the exact version
you are using - repeat what you see there in response to this message.

Now that we have some base information, let's cleanup and get ready to
install Windows XP SP3 onto your Windows XP system.

Reboot so you start with a fresh machine. For everything here you will
need to logon as an user with administrative (installation) priviledges.

Fix your file/registry permissions...

Ignore the title and follow the sub-section under
"Advanced Troubleshooting" titled,
"Method 1: Reset the registry and the file permissions"
http://support.microsoft.com/kb/949377
*will take time
** Ignore the last step (6) - you'll install SP3 shortly, but not now.

You will likely see errors pass by if you watching, even count up. No
worries *at this time*.

*After* that is done, continue on to the next part where you clean off
some excess (unnecessary) files. It only removes those you definitely
do not need, if you follow the directions *as given* and do not deviate.
So reboot (for each of these steps, it is just best to reboot right
before - but I will continue to point that out) and logon as an user with
administrative priviledges.

Download/install the "Windows Installer CleanUp Utility":
http://support.microsoft.com/kb/290301

After installing, do the following:

Start button -- RUN
(no "RUN"? Press the "Windows Key" + R on your keyboard)
-- type in:
"%ProgramFiles%\Windows Installer Clean Up\msizap.exe" g!
-- Click OK.
(The quotation marks and percentage signs and spacing should be exact.)

It will flash by *quick*, don't expect much out of this step to get
excited about. But the cleaner your machine is to start with, the
better your luck will be later (not really luck - more like preparedness,
but that's not as fun to think about, eh?)

Yeah - you will get tired of rebooting - but let's soldier on and reboot
again and logon as an user with administrative priviledges.

This time (and this is one of the more time-consuming steps) you will be
running (one at a time with reboots in-between each) three different
anti-spyware/anti-malware applications to ensure you come up clean.

Download, install, run, update and perform a full scan with the following
(freeware version):

SuperAntiSpyware
http://www.superantispyware.com/

Reboot and logon as administrative user.

Download, install, run, update and perform a full scan with the following
(freeware version):

MalwareBytes
http://www.malwarebytes.com/

Reboot and logon as administrative user.

Download and run the MSRT manually:
http://www.microsoft.com/security/ma...e/default.mspx

You may find nothing, you may find only cookies, you may think it is a
waste of time - but if you do all this and report back here with what you
do/don't find as you are doing all of it - you are adding more pieces to
the puzzle and the entire picture just may become clearer and your
problem resolved.

Reboot and logon as administrative user.

Download/Install the latest Windows Installer (for your OS):
( Windows XP 32-bit : WindowsXP-KB942288-v3-x86.exe )
http://www.microsoft.com/downloadS/d...displaylang=en

Reboot and logon as administrative user.

Download the latest version of the Windows Update agent from here (x86):
http://go.microsoft.com/fwlink/?LinkID=91237
... and save it to the root of your C:\ drive. After saving it to the
root of the C:\ drive, do the following:

Close all Internet Explorer windows and other applications.

Start button -- RUN and type in:
%SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
-- Click OK.

(If asked, select "Run.) -- Click on NEXT -- Select "I agree" and click on
NEXT -- When it finishes installing, click on "Finish"...

Reboot and logon as administrative user.

Visit this web page:

How do I reset Windows Update components?
http://support.microsoft.com/kb/971058

... and click on the "Microsoft Fix it" icon. When asked, select "RUN",
both times. Check the "I agree" box and click on "Next". Check the box
for "Run aggressive options (not recommended)" and click "Next". Let
it finish up and follow the prompts until it is done. Close/exit and
reboot when it is.

Now for SP3...

Download the full SP3 installation file.

Windows XP Service Pack 3 Network Installation Package for
IT Professionals and Developers (works just as well for you.)
http://www.microsoft.com/downloads/d...8-1E1555D4F3D4

You are just saving it right now - not running it yet. There will be no
file size deviation - it is 316.4MB.

You should now perform a full CHKDSK on your system drive (C:)...

How to scan your disks for errors
http://support.microsoft.com/kb/315265
* will take time and a reboot

You should now perform a full Defragment on your system drive (C:)...

How to Defragment your hard drives
http://support.microsoft.com/kb/314848
* will take time

Reboot right before you try to install SP3.

Disconnect from the internet before installing (physically disconnect -
pull the network cable or disable the router/modem.)

Uninstall any and all third-party firewall applications (ZoneAlarm, etc)
and utilize the built-in WIndows Firewall only.

Disable your antivirus and antispyware applications when you are about to
install SP3. Usually right-click on the icon in the taskbar gives you
a choice to do so.

Install SP3 by running the downloaded executable.

Reboot when requested to do so.

Logon and let the machine 'settle' for about 10 minutes.

Reboot.

Give it 5 minutes after logon to 'settle' - reboot.

After that - there will be more updates.

Log on as an user with administrative rights and open Internet Explorer
and visit http://windowsupdate.microsoft.com/ and select to do a
CUSTOM scan...

Every time you are about to click on something while at these web pages -
first press and hold down the CTRL key while you click on it. You can
release the CTRL key after clicking each time.

Once the scan is done, select just _ONE_ of the high priority updates
(deselect any others) and install it.

Reboot again.

If it did work - try the web page again - selecting no more than 3-5 at a
time. Rebooting as needed.

The Optional Software updates are generally safe - although I recommend
against the "Windows Search" one and any of the "Office Live" ones or
"Windows Live" ones for now. I would completely avoid the
Optional Hardware updates. Also - I do not see any urgent need to
install Internet Explorer 8 at this time.

Seriously - do all that. This is like antibiotics - don't skip a single
step, don't quit because you think things will be okay now - go through
until the end, until you have done everything given in the order given. If
you have a problem with a step come ask and let someone here get you
through that step. If you don't understand how to do a step, come back
and ask here about that step and let someone walk you through it.

Then - when done - let everyone here know if it worked for you - or if
you have more issues.

--
Shenan Stanley
MS-MVP



John Callaway May 17th 10 02:36 AM

memory exception error
 
I have Firefox browser. I have not been able to update to SP3.

JPC

On Sun, 16 May 2010 15:59:20 -0500, "Shenan Stanley"
wrote:

John Callaway wrote:
XP Professional 32 bit. Have had trouble updating to SP3.


That's it, eh?
Out of all the questions, that is what you will give?

No specific memory error information (what it says, executable(s) it refers
to)?

Nothing that you have tried? (Scanned your memory for errors maybe?)

Not a hint of what you are running/have just done when you get the error
and/or what applications are running at all times on your machine that might
cause it?

Okay - we'll work with just that. I think, if you have had trouble
installing SP3, you will benefit from cleaning up the system and getting
that installed. Who knows - something you clean up may repair the problem
you are having.

Here's my suggestion - it's a procedure, not a 'do this and try again, if
that doesn't work, do this and try again' - but a 'do this, this, this,
this, this and this and then try' thing. Long, easy, but time consuming.
If nothing else, you will end up with a cleaner system and a lot of possible
issues will be eliminated.

This question has to do with what type of computer you own and what type
of processor it has. It's pretty straight forward: Is it an HP branded
computer and does it have an AMD processor installed?

If the answer to BOTH of those is YES, then you need to prevent a known
issue with that combination using the following instructions:
http://h10025.www1.hp.com:80/ewfrf/w...tem=pv-60484-2

If the answer to EITHER of those is NO, then you are generally safe in
continuing on. But either way - answer back here so everyone can know
what you are doing/what you have step-by-excruciating-step.

What version of Internet Explorer are you currently using? Easy to find
out. Open Internet Explorer and while that is in-focus, press and hold
the "ALT" key on your keyboard. With the "ALT" key still pressed, press
(just once, no holding) the "H" key. Now, with the "ALT" key still
pressed, press (just once, no holding) the "A" key. That will bring up
the "About Internet Explorer" window. It will give you the exact version
you are using - repeat what you see there in response to this message.

Now that we have some base information, let's cleanup and get ready to
install Windows XP SP3 onto your Windows XP system.

Reboot so you start with a fresh machine. For everything here you will
need to logon as an user with administrative (installation) priviledges.

Fix your file/registry permissions...

Ignore the title and follow the sub-section under
"Advanced Troubleshooting" titled,
"Method 1: Reset the registry and the file permissions"
http://support.microsoft.com/kb/949377
*will take time
** Ignore the last step (6) - you'll install SP3 shortly, but not now.

You will likely see errors pass by if you watching, even count up. No
worries *at this time*.

*After* that is done, continue on to the next part where you clean off
some excess (unnecessary) files. It only removes those you definitely
do not need, if you follow the directions *as given* and do not deviate.
So reboot (for each of these steps, it is just best to reboot right
before - but I will continue to point that out) and logon as an user with
administrative priviledges.

Download/install the "Windows Installer CleanUp Utility":
http://support.microsoft.com/kb/290301

After installing, do the following:

Start button -- RUN
(no "RUN"? Press the "Windows Key" + R on your keyboard)
-- type in:
"%ProgramFiles%\Windows Installer Clean Up\msizap.exe" g!
-- Click OK.
(The quotation marks and percentage signs and spacing should be exact.)

It will flash by *quick*, don't expect much out of this step to get
excited about. But the cleaner your machine is to start with, the
better your luck will be later (not really luck - more like preparedness,
but that's not as fun to think about, eh?)

Yeah - you will get tired of rebooting - but let's soldier on and reboot
again and logon as an user with administrative priviledges.

This time (and this is one of the more time-consuming steps) you will be
running (one at a time with reboots in-between each) three different
anti-spyware/anti-malware applications to ensure you come up clean.

Download, install, run, update and perform a full scan with the following
(freeware version):

SuperAntiSpyware
http://www.superantispyware.com/

Reboot and logon as administrative user.

Download, install, run, update and perform a full scan with the following
(freeware version):

MalwareBytes
http://www.malwarebytes.com/

Reboot and logon as administrative user.

Download and run the MSRT manually:
http://www.microsoft.com/security/ma...e/default.mspx

You may find nothing, you may find only cookies, you may think it is a
waste of time - but if you do all this and report back here with what you
do/don't find as you are doing all of it - you are adding more pieces to
the puzzle and the entire picture just may become clearer and your
problem resolved.

Reboot and logon as administrative user.

Download/Install the latest Windows Installer (for your OS):
( Windows XP 32-bit : WindowsXP-KB942288-v3-x86.exe )
http://www.microsoft.com/downloadS/d...displaylang=en

Reboot and logon as administrative user.

Download the latest version of the Windows Update agent from here (x86):
http://go.microsoft.com/fwlink/?LinkID=91237
... and save it to the root of your C:\ drive. After saving it to the
root of the C:\ drive, do the following:

Close all Internet Explorer windows and other applications.

Start button -- RUN and type in:
%SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
-- Click OK.

(If asked, select "Run.) -- Click on NEXT -- Select "I agree" and click on
NEXT -- When it finishes installing, click on "Finish"...

Reboot and logon as administrative user.

Visit this web page:

How do I reset Windows Update components?
http://support.microsoft.com/kb/971058

... and click on the "Microsoft Fix it" icon. When asked, select "RUN",
both times. Check the "I agree" box and click on "Next". Check the box
for "Run aggressive options (not recommended)" and click "Next". Let
it finish up and follow the prompts until it is done. Close/exit and
reboot when it is.

Now for SP3...

Download the full SP3 installation file.

Windows XP Service Pack 3 Network Installation Package for
IT Professionals and Developers (works just as well for you.)
http://www.microsoft.com/downloads/d...8-1E1555D4F3D4

You are just saving it right now - not running it yet. There will be no
file size deviation - it is 316.4MB.

You should now perform a full CHKDSK on your system drive (C:)...

How to scan your disks for errors
http://support.microsoft.com/kb/315265
* will take time and a reboot

You should now perform a full Defragment on your system drive (C:)...

How to Defragment your hard drives
http://support.microsoft.com/kb/314848
* will take time

Reboot right before you try to install SP3.

Disconnect from the internet before installing (physically disconnect -
pull the network cable or disable the router/modem.)

Uninstall any and all third-party firewall applications (ZoneAlarm, etc)
and utilize the built-in WIndows Firewall only.

Disable your antivirus and antispyware applications when you are about to
install SP3. Usually right-click on the icon in the taskbar gives you
a choice to do so.

Install SP3 by running the downloaded executable.

Reboot when requested to do so.

Logon and let the machine 'settle' for about 10 minutes.

Reboot.

Give it 5 minutes after logon to 'settle' - reboot.

After that - there will be more updates.

Log on as an user with administrative rights and open Internet Explorer
and visit http://windowsupdate.microsoft.com/ and select to do a
CUSTOM scan...

Every time you are about to click on something while at these web pages -
first press and hold down the CTRL key while you click on it. You can
release the CTRL key after clicking each time.

Once the scan is done, select just _ONE_ of the high priority updates
(deselect any others) and install it.

Reboot again.

If it did work - try the web page again - selecting no more than 3-5 at a
time. Rebooting as needed.

The Optional Software updates are generally safe - although I recommend
against the "Windows Search" one and any of the "Office Live" ones or
"Windows Live" ones for now. I would completely avoid the
Optional Hardware updates. Also - I do not see any urgent need to
install Internet Explorer 8 at this time.

Seriously - do all that. This is like antibiotics - don't skip a single
step, don't quit because you think things will be okay now - go through
until the end, until you have done everything given in the order given. If
you have a problem with a step come ask and let someone here get you
through that step. If you don't understand how to do a step, come back
and ask here about that step and let someone walk you through it.

Then - when done - let everyone here know if it worked for you - or if
you have more issues.

--
Shenan Stanley
MS-MVP




All times are GMT +1. The time now is 09:50 AM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 2004 - 2006 PCbanter
Comments are property of their posters