2.4 gig Network AND 2.4 gig Video
Hi these two suckers interfere with each other. What do i do?
Thanks |
2.4 gig Network AND 2.4 gig Video
Interfere in what way? We're just about to start up the same.
-- Regards, Dave Patrick ....Please no email replies - reply in newsgroup. Microsoft MVP [Windows NT/2000 Operating Systems] "Jeff Clark" wrote: Hi these two suckers interfere with each other. What do i do? Thanks |
2.4 gig Network AND 2.4 gig Video
I can only get one or the other. The Network blocks out the camera.
dell wireless router vs x10 4 channel web sender "Dave Patrick" wrote in message ... Interfere in what way? We're just about to start up the same. -- Regards, Dave Patrick ....Please no email replies - reply in newsgroup. Microsoft MVP [Windows NT/2000 Operating Systems] "Jeff Clark" wrote: Hi these two suckers interfere with each other. What do i do? Thanks |
2.4 gig Network AND 2.4 gig Video
Not too surprising when both use the same frequency... Does the video have
switches to change band? If not, there's not a lot you can do about it except change one or the other to different frequencies... You'll also find microwave ovens interfere too... :( Lorne "Jeff Clark" wrote in message ... Hi these two suckers interfere with each other. What do i do? Thanks |
2.4 gig Network AND 2.4 gig Video
i have changed to all 4 frequncies - no help
What can i do, meaning what other solutions are out there? "Lorne Smith" wrote in message ... Not too surprising when both use the same frequency... Does the video have switches to change band? If not, there's not a lot you can do about it except change one or the other to different frequencies... You'll also find microwave ovens interfere too... :( Lorne "Jeff Clark" wrote in message ... Hi these two suckers interfere with each other. What do i do? Thanks |
2.4 gig Network AND 2.4 gig Video
"Jeff Clark" wrote in message ... i have changed to all 4 frequncies - no help What can i do, meaning what other solutions are out there? "Lorne Smith" wrote in message ... Not too surprising when both use the same frequency... Does the video have switches to change band? If not, there's not a lot you can do about it except change one or the other to different frequencies... You'll also find microwave ovens interfere too... :( Lorne "Jeff Clark" wrote in message ... Hi these two suckers interfere with each other. What do i do? Thanks Typically, the video repeaters will wipe out the routers, but the routers will only cause noise to the video repeaters (popping sound and streak in the video at about 1 or 2 pps). The video repeaters (at least the ones I've seen) have a switch on each end that lets you pick one of four channels. If you try any of this stuff, try it first with the video set on the first channel, then the last. Avoid the channels in the middle. Some of the 802.11 stuff is spread spectrum, so it's constantly changing frequencies and doesn't put all of it's energy into one. Others, have a channel selection choice in their configuration. You'll have to play around with the setup on both the router and any wireless cards if you change any of the configurations. (THEY MUST MATCH EXACTLY.) If you're using a D-Link router & wireless card that have the "super-duper-speed-thing" turned on, turn it off. That'll make reception better regardless of any interference. Try to set the video repeater up first and make it as directional as possible. If it's the kind with the little panel antennas, try to point the sender at the receiver and vice-vera. If the sender has a little mast antenna in addition to the panel, fold it down, but make sure that you can still get a signal. If you're traversing floors inside a house with the router, but not the video (or vice-versa) consider putting one of the units on a high shelf and its complement on the floor. If you're only working in one plane, then it's just geography (not geometry g). Figure out if there's a place to put your wireless access point so that it's not directly in the path of the video repeater's signal. If it's a regular wireless router, like a D-Link or a Linksys, chances are that it has one or two little stubby antennas on the back. Unlike the video repeater antennas, these aren't directional; they are omni-directional so they're going to "spray" all over the place. You can prevent some of that, again, by pointing the antennas to where you need the signal and by trying to avoid overlapping with the video repeater's path. Again, depending on the type or routers you have, a good healthy reset (and configuration reload) wouldn't hurt every time you move something. I don't know it for fact, but have heard that some of the 802.11 stuff is "smart" enough to avoid interference, but may only look around when it's initialized. If this gets you anywhere close, there are some directional antennas that you can buy for the wireless routers that might help, but before I spent any money, I'd consider looking at the newer wireless stuff that's on 5.8Ghz. A whole new set of frequencies for everybody to muck up, but they'll be clean for a while. Also, you might look for some older video repeaters (?eBay?). IIRC, there were some that operated on 900Mhz and that shouldn't interfere. Finally, as you're playing around with the antennas, if you find that you can get the video signal lined up reasonably well, it does work to make a little shield out of any kind of metal (aluminum foil worked for me). Wrap this around the back of the panel antennas and let it stick out to protect the sides. (It probably should be grounded, but I didn't worry about it and it helped.) I never had to do it, but you could probably do the same thing on the router's antennas with foil and tape. trebor |
2.4 gig Network AND 2.4 gig Video
thank you very much
"trebor4258" wrote in message ... "Jeff Clark" wrote in message ... i have changed to all 4 frequncies - no help What can i do, meaning what other solutions are out there? "Lorne Smith" wrote in message ... Not too surprising when both use the same frequency... Does the video have switches to change band? If not, there's not a lot you can do about it except change one or the other to different frequencies... You'll also find microwave ovens interfere too... :( Lorne "Jeff Clark" wrote in message ... Hi these two suckers interfere with each other. What do i do? Thanks Typically, the video repeaters will wipe out the routers, but the routers will only cause noise to the video repeaters (popping sound and streak in the video at about 1 or 2 pps). The video repeaters (at least the ones I've seen) have a switch on each end that lets you pick one of four channels. If you try any of this stuff, try it first with the video set on the first channel, then the last. Avoid the channels in the middle. Some of the 802.11 stuff is spread spectrum, so it's constantly changing frequencies and doesn't put all of it's energy into one. Others, have a channel selection choice in their configuration. You'll have to play around with the setup on both the router and any wireless cards if you change any of the configurations. (THEY MUST MATCH EXACTLY.) If you're using a D-Link router & wireless card that have the "super-duper-speed-thing" turned on, turn it off. That'll make reception better regardless of any interference. Try to set the video repeater up first and make it as directional as possible. If it's the kind with the little panel antennas, try to point the sender at the receiver and vice-vera. If the sender has a little mast antenna in addition to the panel, fold it down, but make sure that you can still get a signal. If you're traversing floors inside a house with the router, but not the video (or vice-versa) consider putting one of the units on a high shelf and its complement on the floor. If you're only working in one plane, then it's just geography (not geometry g). Figure out if there's a place to put your wireless access point so that it's not directly in the path of the video repeater's signal. If it's a regular wireless router, like a D-Link or a Linksys, chances are that it has one or two little stubby antennas on the back. Unlike the video repeater antennas, these aren't directional; they are omni-directional so they're going to "spray" all over the place. You can prevent some of that, again, by pointing the antennas to where you need the signal and by trying to avoid overlapping with the video repeater's path. Again, depending on the type or routers you have, a good healthy reset (and configuration reload) wouldn't hurt every time you move something. I don't know it for fact, but have heard that some of the 802.11 stuff is "smart" enough to avoid interference, but may only look around when it's initialized. If this gets you anywhere close, there are some directional antennas that you can buy for the wireless routers that might help, but before I spent any money, I'd consider looking at the newer wireless stuff that's on 5.8Ghz. A whole new set of frequencies for everybody to muck up, but they'll be clean for a while. Also, you might look for some older video repeaters (?eBay?). IIRC, there were some that operated on 900Mhz and that shouldn't interfere. Finally, as you're playing around with the antennas, if you find that you can get the video signal lined up reasonably well, it does work to make a little shield out of any kind of metal (aluminum foil worked for me). Wrap this around the back of the panel antennas and let it stick out to protect the sides. (It probably should be grounded, but I didn't worry about it and it helped.) I never had to do it, but you could probably do the same thing on the router's antennas with foil and tape. trebor |
2.4 gig Network AND 2.4 gig Video
No problem; Let us know how it all comes out.
trebor (with apologies for top posting) "Jeff Clark" wrote in message ... thank you very much "trebor4258" wrote in message ... "Jeff Clark" wrote in message ... i have changed to all 4 frequncies - no help What can i do, meaning what other solutions are out there? "Lorne Smith" wrote in message ... Not too surprising when both use the same frequency... Does the video have switches to change band? If not, there's not a lot you can do about it except change one or the other to different frequencies... You'll also find microwave ovens interfere too... :( Lorne "Jeff Clark" wrote in message ... Hi these two suckers interfere with each other. What do i do? Thanks Typically, the video repeaters will wipe out the routers, but the routers will only cause noise to the video repeaters (popping sound and streak in the video at about 1 or 2 pps). The video repeaters (at least the ones I've seen) have a switch on each end that lets you pick one of four channels. If you try any of this stuff, try it first with the video set on the first channel, then the last. Avoid the channels in the middle. Some of the 802.11 stuff is spread spectrum, so it's constantly changing frequencies and doesn't put all of it's energy into one. Others, have a channel selection choice in their configuration. You'll have to play around with the setup on both the router and any wireless cards if you change any of the configurations. (THEY MUST MATCH EXACTLY.) If you're using a D-Link router & wireless card that have the "super-duper-speed-thing" turned on, turn it off. That'll make reception better regardless of any interference. Try to set the video repeater up first and make it as directional as possible. If it's the kind with the little panel antennas, try to point the sender at the receiver and vice-vera. If the sender has a little mast antenna in addition to the panel, fold it down, but make sure that you can still get a signal. If you're traversing floors inside a house with the router, but not the video (or vice-versa) consider putting one of the units on a high shelf and its complement on the floor. If you're only working in one plane, then it's just geography (not geometry g). Figure out if there's a place to put your wireless access point so that it's not directly in the path of the video repeater's signal. If it's a regular wireless router, like a D-Link or a Linksys, chances are that it has one or two little stubby antennas on the back. Unlike the video repeater antennas, these aren't directional; they are omni-directional so they're going to "spray" all over the place. You can prevent some of that, again, by pointing the antennas to where you need the signal and by trying to avoid overlapping with the video repeater's path. Again, depending on the type or routers you have, a good healthy reset (and configuration reload) wouldn't hurt every time you move something. I don't know it for fact, but have heard that some of the 802.11 stuff is "smart" enough to avoid interference, but may only look around when it's initialized. If this gets you anywhere close, there are some directional antennas that you can buy for the wireless routers that might help, but before I spent any money, I'd consider looking at the newer wireless stuff that's on 5.8Ghz. A whole new set of frequencies for everybody to muck up, but they'll be clean for a while. Also, you might look for some older video repeaters (?eBay?). IIRC, there were some that operated on 900Mhz and that shouldn't interfere. Finally, as you're playing around with the antennas, if you find that you can get the video signal lined up reasonably well, it does work to make a little shield out of any kind of metal (aluminum foil worked for me). Wrap this around the back of the panel antennas and let it stick out to protect the sides. (It probably should be grounded, but I didn't worry about it and it helped.) I never had to do it, but you could probably do the same thing on the router's antennas with foil and tape. trebor |
2.4 gig Network AND 2.4 gig Video
i will but i may not have a final outcome for a while
"trebor4258" wrote in message ... No problem; Let us know how it all comes out. trebor (with apologies for top posting) "Jeff Clark" wrote in message ... thank you very much "trebor4258" wrote in message ... "Jeff Clark" wrote in message ... i have changed to all 4 frequncies - no help What can i do, meaning what other solutions are out there? "Lorne Smith" wrote in message ... Not too surprising when both use the same frequency... Does the video have switches to change band? If not, there's not a lot you can do about it except change one or the other to different frequencies... You'll also find microwave ovens interfere too... :( Lorne "Jeff Clark" wrote in message ... Hi these two suckers interfere with each other. What do i do? Thanks Typically, the video repeaters will wipe out the routers, but the routers will only cause noise to the video repeaters (popping sound and streak in the video at about 1 or 2 pps). The video repeaters (at least the ones I've seen) have a switch on each end that lets you pick one of four channels. If you try any of this stuff, try it first with the video set on the first channel, then the last. Avoid the channels in the middle. Some of the 802.11 stuff is spread spectrum, so it's constantly changing frequencies and doesn't put all of it's energy into one. Others, have a channel selection choice in their configuration. You'll have to play around with the setup on both the router and any wireless cards if you change any of the configurations. (THEY MUST MATCH EXACTLY.) If you're using a D-Link router & wireless card that have the "super-duper-speed-thing" turned on, turn it off. That'll make reception better regardless of any interference. Try to set the video repeater up first and make it as directional as possible. If it's the kind with the little panel antennas, try to point the sender at the receiver and vice-vera. If the sender has a little mast antenna in addition to the panel, fold it down, but make sure that you can still get a signal. If you're traversing floors inside a house with the router, but not the video (or vice-versa) consider putting one of the units on a high shelf and its complement on the floor. If you're only working in one plane, then it's just geography (not geometry g). Figure out if there's a place to put your wireless access point so that it's not directly in the path of the video repeater's signal. If it's a regular wireless router, like a D-Link or a Linksys, chances are that it has one or two little stubby antennas on the back. Unlike the video repeater antennas, these aren't directional; they are omni-directional so they're going to "spray" all over the place. You can prevent some of that, again, by pointing the antennas to where you need the signal and by trying to avoid overlapping with the video repeater's path. Again, depending on the type or routers you have, a good healthy reset (and configuration reload) wouldn't hurt every time you move something. I don't know it for fact, but have heard that some of the 802.11 stuff is "smart" enough to avoid interference, but may only look around when it's initialized. If this gets you anywhere close, there are some directional antennas that you can buy for the wireless routers that might help, but before I spent any money, I'd consider looking at the newer wireless stuff that's on 5.8Ghz. A whole new set of frequencies for everybody to muck up, but they'll be clean for a while. Also, you might look for some older video repeaters (?eBay?). IIRC, there were some that operated on 900Mhz and that shouldn't interfere. Finally, as you're playing around with the antennas, if you find that you can get the video signal lined up reasonably well, it does work to make a little shield out of any kind of metal (aluminum foil worked for me). Wrap this around the back of the panel antennas and let it stick out to protect the sides. (It probably should be grounded, but I didn't worry about it and it helped.) I never had to do it, but you could probably do the same thing on the router's antennas with foil and tape. trebor |
All times are GMT +1. The time now is 03:17 AM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 2004 - 2006 PCbanter
Comments are property of their posters