New applications do install but won't run
 

Hi all,

Recently I moved from W7 pro 64b to W10 pro 64b. A fresh install on a
newly formatted SSD. It runs OK but as from yesterday there is something
wrong. I am able to install a program without a problem, but after that
it won't run. The application starts, but closes with the message: "xxx
has stopped working. A problem caused the program to stop working
correctly. Windows will close the program and notify you if a solution
is available."
This happened for three new programs I wanted to have.

All other programs which were installed run OK. Only the new ones don't.
What can be wrong?

Thanks in advance.

Kind regards,
Fokke Nauta

New applications do install but won't run
 

Fokke Nauta wrote:

Recently I moved from W7 pro 64b to W10 pro 64b. A fresh install on a
newly formatted SSD. It runs OK but as from yesterday there is something
wrong. I am able to install a program without a problem, but after that
it won't run. The application starts, but closes with the message: "xxx
has stopped working. A problem caused the program to stop working
correctly. Windows will close the program and notify you if a solution
is available."
This happened for three new programs I wanted to have.

All other programs which were installed run OK. Only the new ones don't.
What can be wrong?

That's a bit hard to say. It depends on any number of things.

Personally, I would assume that the Windows install was bad and start over,
but that's just me.

--
- Is there to be a trial? May I defend myself? I mean, I'll do that if
you attack and most likely kill you all quite horribly, but I mean
in the legal sense.
- He really will. If I don't first, that is.

New applications do install but won't run
 

On 4/7/2018 1:51 PM, Fokke Nauta wrote:
Hi all,

Recently I moved from W7 pro 64b to W10 pro 64b. A fresh install on a
newly formatted SSD. It runs OK but as from yesterday there is something
wrong. I am able to install a program without a problem, but after that
it won't run. The application starts, but closes with the message: "xxx
has stopped working. A problem caused the program to stop working
correctly. Windows will close the program and notify you if a solution
is available."
This happened for three new programs I wanted to have.

All other programs which were installed run OK. Only the new ones don't.
What can be wrong?

Thanks in advance.

Kind regards,
Fokke Nauta

Right-click the program or shortcut and select
"Troubleshoot Compatibility".

Ben

New applications do install but won't run
 

On 07/04/2018 20:27, Wolf K wrote:
On 2018-04-07 13:51, Fokke Nauta wrote:
Hi all,

Recently I moved from W7 pro 64b to W10 pro 64b. A fresh install on a
newly formatted SSD. It runs OK but as from yesterday there is
something wrong. I am able to install a program without a problem, but
after that it won't run. The application starts, but closes with the
message: "xxx has stopped working. A problem caused the program to
stop working correctly. Windows will close the program and notify you
if a solution is available."
This happened for three new programs I wanted to have.

All other programs which were installed run OK. Only the new ones don't.
What can be wrong?

Thanks in advance.

Kind regards,
Fokke Nauta

Might help to know which programs. If they are new-to-you but otherwise
old, they may not play nice with Win7 and later. Check the compatibility
specs.

Good luck,


They are Sonar Professional, MuseScore 2 and Sibelius First, all
compatible with W10.
I used tu run Sonar on my old W7 pc, the other two are new to me.

Fokke

New applications do install but won't run
 

On 07/04/2018 21:00, Ben Myers wrote:
On 4/7/2018 1:51 PM, Fokke Nauta wrote:
Hi all,

Recently I moved from W7 pro 64b to W10 pro 64b. A fresh install on a
newly formatted SSD. It runs OK but as from yesterday there is
something wrong. I am able to install a program without a problem, but
after that it won't run. The application starts, but closes with the
message: "xxx has stopped working. A problem caused the program to
stop working correctly. Windows will close the program and notify you
if a solution is available."
This happened for three new programs I wanted to have.

All other programs which were installed run OK. Only the new ones don't.
What can be wrong?

Thanks in advance.

Kind regards,
Fokke Nauta

Right-click the program or shortcut and select
"Troubleshoot Compatibility".

Ben

They are all compatible. Nevertheless I did, but it did not make a
difference.

Fokke

New applications do install but won't run
 

On Sat, 7 Apr 2018 21:29:31 +0200, Fokke Nauta
wrote:

On 07/04/2018 20:27, Wolf K wrote:
On 2018-04-07 13:51, Fokke Nauta wrote:
Hi all,

Recently I moved from W7 pro 64b to W10 pro 64b. A fresh install on a
newly formatted SSD. It runs OK but as from yesterday there is
something wrong. I am able to install a program without a problem, but
after that it won't run. The application starts, but closes with the
message: "xxx has stopped working. A problem caused the program to
stop working correctly. Windows will close the program and notify you
if a solution is available."
This happened for three new programs I wanted to have.

All other programs which were installed run OK. Only the new ones don't.
What can be wrong?

Thanks in advance.

Kind regards,
Fokke Nauta

Might help to know which programs. If they are new-to-you but otherwise
old, they may not play nice with Win7 and later. Check the compatibility
specs.

Good luck,


They are Sonar Professional, MuseScore 2 and Sibelius First, all
compatible with W10.
I used tu run Sonar on my old W7 pc, the other two are new to me.



I don't know Sonar Professional and Sibelius First, but I'll attest to
MuseScore 2 running under Windows 10. It runs without a problem here.

It's still installed here, but I never use it. I can't remember why,
but I didn't like it.

New applications do install but won't run
 

On 4/7/2018 12:00 PM, Ben Myers wrote:
On 4/7/2018 1:51 PM, Fokke Nauta wrote:
Hi all,

Recently I moved from W7 pro 64b to W10 pro 64b. A fresh install on a
newly formatted SSD. It runs OK but as from yesterday there is
something wrong. I am able to install a program without a problem, but
after that it won't run. The application starts, but closes with the
message: "xxx has stopped working. A problem caused the program to
stop working correctly. Windows will close the program and notify you
if a solution is available."
This happened for three new programs I wanted to have.

All other programs which were installed run OK. Only the new ones don't.
What can be wrong?

Thanks in advance.

Kind regards,
Fokke Nauta

Right-click the program or shortcut and select
"Troubleshoot Compatibility".

Ben
That's an excellent thing to try.
The compatibility troubleshooter attempts go get it right.
Sometimes, you can make it work by manually setting the compatibility
mode for the OS version that your program originally supported.
I've had programs install in compatibility mode, but
misbehave in some manner or other.

If the failure has no decipherable error message, the program
may not be at fault. The underlying problem may be some incompatible
function of a hardware driver.

One question is, "what is the definition of new?"
Is this a "new" win10-compatible program"?
Or a "different" "old" program you're trying to install
on for the first time on win10?
If it's the latter, now would be a good time to look
for an upgraded version or an alternative win10-compatible
program.
If that's not possible, do some googling for a solution for
that particular program. I've found chasing compatibility
issues to be frustrating if someone hasn't already figgered it out.

New applications do install but won't run
 

On 07/04/2018 21:34, Ken Blake wrote:
On Sat, 7 Apr 2018 21:29:31 +0200, Fokke Nauta
wrote:

On 07/04/2018 20:27, Wolf K wrote:
On 2018-04-07 13:51, Fokke Nauta wrote:
Hi all,

Recently I moved from W7 pro 64b to W10 pro 64b. A fresh install on a
newly formatted SSD. It runs OK but as from yesterday there is
something wrong. I am able to install a program without a problem, but
after that it won't run. The application starts, but closes with the
message: "xxx has stopped working. A problem caused the program to
stop working correctly. Windows will close the program and notify you
if a solution is available."
This happened for three new programs I wanted to have.

All other programs which were installed run OK. Only the new ones don't.
What can be wrong?

Thanks in advance.

Kind regards,
Fokke Nauta

Might help to know which programs. If they are new-to-you but otherwise
old, they may not play nice with Win7 and later. Check the compatibility
specs.

Good luck,


They are Sonar Professional, MuseScore 2 and Sibelius First, all
compatible with W10.
I used tu run Sonar on my old W7 pc, the other two are new to me.



I don't know Sonar Professional and Sibelius First, but I'll attest to
MuseScore 2 running under Windows 10. It runs without a problem here.

It's still installed here, but I never use it. I can't remember why,
but I didn't like it.


I'd like to try it, but something is wong with my system.
Got an installation log from Sibelius First, and the installation was
completely succesfull. So - that's not the point. Somehow Windows stops
running these programs, all with the same message.

New applications do install but won't run
 

On 07/04/2018 21:37, mike wrote:
On 4/7/2018 12:00 PM, Ben Myers wrote:
On 4/7/2018 1:51 PM, Fokke Nauta wrote:
Hi all,

Recently I moved from W7 pro 64b to W10 pro 64b. A fresh install on a
newly formatted SSD. It runs OK but as from yesterday there is
something wrong. I am able to install a program without a problem, but
after that it won't run. The application starts, but closes with the
message: "xxx has stopped working. A problem caused the program to
stop working correctly. Windows will close the program and notify you
if a solution is available."
This happened for three new programs I wanted to have.

All other programs which were installed run OK. Only the new ones don't.
What can be wrong?

Thanks in advance.

Kind regards,
Fokke Nauta

Right-click the program or shortcut and select
"Troubleshoot Compatibility".

Ben
That's an excellent thing to try.
The compatibility troubleshooter attempts go get it right.
Sometimes, you can make it work by manually setting the compatibility
mode for the OS version that your program originally supported.
I've had programs install in compatibility mode, but
misbehave in some manner or other.

If the failure has no decipherable error message, the program
may not be at fault. The underlying problem may be some incompatible
function of a hardware driver.

One question is, "what is the definition of new?"
Is this a "new" win10-compatible program"?
Or a "different" "old" program you're trying to install
on for the first time on win10?
If it's the latter, now would be a good time to look
for an upgraded version or an alternative win10-compatible
program.
If that's not possible, do some googling for a solution for
that particular program. I've found chasing compatibility
issues to be frustrating if someone hasn't already figgered it out.

The old program was Sonar Professional, which I ran on W7. It's
compatible with W10, though.
The other two, MuseScore 2 and Sibelius First, are new to me but they
are both compatible with W10.

New applications do install but won't run
 

On 07/04/2018 18:51, Fokke Nauta wrote:
Hi all,

Recently I moved from W7 pro 64b to W10 pro 64b. A fresh install on a
newly formatted SSD. It runs OK but as from yesterday there is
something wrong. I am able to install a program without a problem, but
after that it won't run. The application starts, but closes with the
message: "xxx has stopped working. A problem caused the program to
stop working correctly. Windows will close the program and notify you
if a solution is available."
This happened for three new programs I wanted to have.

All other programs which were installed run OK. Only the new ones don't.
What can be wrong?

Thanks in advance.

Kind regards,
Fokke Nauta

Hey ****er Nauta,

Have you tried running them as Administrator? They should run if they
are installed "correctly" and installation didn't report any errors.

Do you know how to run apps as administrator?

/--- This email has been checked for viruses by
Windows Defender software.
//https://www.microsoft.com/en-gb/windows/comprehensive-security/


--
With over 600 million devices now running Windows 10, customer
satisfaction is higher than any previous version of windows.

New applications do install but won't run
 

On 07/04/2018 21:52, Good Guy wrote:
On 07/04/2018 18:51, Fokke Nauta wrote:
Hi all,

Recently I moved from W7 pro 64b to W10 pro 64b. A fresh install on a
newly formatted SSD. It runs OK but as from yesterday there is
something wrong. I am able to install a program without a problem, but
after that it won't run. The application starts, but closes with the
message: "xxx has stopped working. A problem caused the program to
stop working correctly. Windows will close the program and notify you
if a solution is available."
This happened for three new programs I wanted to have.

All other programs which were installed run OK. Only the new ones don't.
What can be wrong?

Thanks in advance.

Kind regards,
Fokke Nauta

Hey ****er Nauta,

Have you tried running them as Administrator? They should run if they
are installed "correctly" and installation didn't report any errors.

Do you know how to run apps as administrator?

/--- This email has been checked for viruses by
Windows Defender software.
//https://www.microsoft.com/en-gb/windows/comprehensive-security/


--
With over 600 million devices now running Windows 10, customer
satisfaction is higher than any previous version of windows.

**** off and go mess somewhere else.

New applications do install but won't run
 

On 4/7/2018 12:44 PM, Fokke Nauta wrote:
On 07/04/2018 21:37, mike wrote:
On 4/7/2018 12:00 PM, Ben Myers wrote:
On 4/7/2018 1:51 PM, Fokke Nauta wrote:
Hi all,

Recently I moved from W7 pro 64b to W10 pro 64b. A fresh install on a
newly formatted SSD. It runs OK but as from yesterday there is
something wrong. I am able to install a program without a problem, but
after that it won't run. The application starts, but closes with the
message: "xxx has stopped working. A problem caused the program to
stop working correctly. Windows will close the program and notify you
if a solution is available."
This happened for three new programs I wanted to have.

Did you install all three then test? Or install/test one at a time?
Sometimes, high-performance programs cheat by reconfiguring hardware
setups. That can cause conflicts with other programs.
When you uninstall, sometimes you don't get everything removed.
Paid software has incentives to prevent piracy by any means necessary.
But paid software should have a support group you can consult.


All other programs which were installed run OK. Only the new ones
don't.
What can be wrong?

Thanks in advance.

Kind regards,
Fokke Nauta

Right-click the program or shortcut and select
"Troubleshoot Compatibility".

Ben
That's an excellent thing to try.
The compatibility troubleshooter attempts go get it right.
Sometimes, you can make it work by manually setting the compatibility
mode for the OS version that your program originally supported.
I've had programs install in compatibility mode, but
misbehave in some manner or other.

If the failure has no decipherable error message, the program
may not be at fault. The underlying problem may be some incompatible
function of a hardware driver.

One question is, "what is the definition of new?"
Is this a "new" win10-compatible program"?
Or a "different" "old" program you're trying to install
on for the first time on win10?
If it's the latter, now would be a good time to look
for an upgraded version or an alternative win10-compatible
program.
If that's not possible, do some googling for a solution for
that particular program. I've found chasing compatibility
issues to be frustrating if someone hasn't already figgered it out.

The old program was Sonar Professional, which I ran on W7. It's
compatible with W10, though.
The other two, MuseScore 2 and Sibelius First, are new to me but they
are both compatible with W10.

I'd look at the sound driver and sound configuration.
If you have motherboard sound hardware and plugin sound-related
devices, you may be able to disable the onboard in the bios or thru
device manager.

This computer has a PCI gigabit ethernet card. The only way I could make
it work was to disable the onboard LAN in the BIOS. Disabling in Device
Manager didn't help.

New applications do install but won't run
 

On 07/04/2018 19:51, Fokke Nauta wrote:
Hi all,

Recently I moved from W7 pro 64b to W10 pro 64b. A fresh install on a
newly formatted SSD. It runs OK but as from yesterday there is something
wrong. I am able to install a program without a problem, but after that
it won't run. The application starts, but closes with the message: "xxx
has stopped working. A problem caused the program to stop working
correctly. Windows will close the program and notify you if a solution
is available."
This happened for three new programs I wanted to have.

All other programs which were installed run OK. Only the new ones don't.
What can be wrong?

Thanks in advance.

Kind regards,
Fokke Nauta

This what the event viewer shows:

Faulting application name: Sibelius First.exe, version: 8.7.2.1234, time
stamp: 0x5a0a0ae6
Faulting module name: revoasio64.dll, version: 5.10.0.5064, time stamp:
0x49beac89
Exception code: 0xc0000409
Fault offset: 0x0000000000004e6a
Faulting process ID: 0x14f0
Faulting application start time: 0x01d3ceaa40adfdb2
Faulting application path: C:\Program Files\Avid\Sibelius First\Sibelius
First.exe
Faulting module path: C:\Windows\system32\revoasio64.dll
Report ID: 50c3d65c-d87e-4eb9-8d49-19111598282c
Faulting package full name:
Faulting package-relative application ID:

Perhaps this makes sense?

Fokke

New applications do install but won't run
 

On 07/04/2018 21:06, Fokke Nauta wrote:
On 07/04/2018 19:51, Fokke Nauta wrote:


Perhaps this makes sense?

Fokke

Yes it does make sense. It's telling us that some ****er idiot is using
the machine.

/--- This email has been checked for viruses by
Windows Defender software.
//https://www.microsoft.com/en-gb/windows/comprehensive-security/


--
With over 600 million devices now running Windows 10, customer
satisfaction is higher than any previous version of windows.

New applications do install but won't run
 

On 07/04/2018 22:01, mike wrote:
On 4/7/2018 12:44 PM, Fokke Nauta wrote:
On 07/04/2018 21:37, mike wrote:
On 4/7/2018 12:00 PM, Ben Myers wrote:
On 4/7/2018 1:51 PM, Fokke Nauta wrote:
Hi all,

Recently I moved from W7 pro 64b to W10 pro 64b. A fresh install on a
newly formatted SSD. It runs OK but as from yesterday there is
something wrong. I am able to install a program without a problem, but
after that it won't run. The application starts, but closes with the
message: "xxx has stopped working. A problem caused the program to
stop working correctly. Windows will close the program and notify you
if a solution is available."
This happened for three new programs I wanted to have.

Did you install all three then test? Or install/test one at a time?
Sometimes, high-performance programs cheat by reconfiguring hardware
setups. That can cause conflicts with other programs.
When you uninstall, sometimes you don't get everything removed.
Paid software has incentives to prevent piracy by any means necessary.
But paid software should have a support group you can consult.


All other programs which were installed run OK. Only the new ones
don't.
What can be wrong?

Thanks in advance.

Kind regards,
Fokke Nauta

Right-click the program or shortcut and select
"Troubleshoot Compatibility".

Ben
That's an excellent thing to try.
The compatibility troubleshooter attempts go get it right.
Sometimes, you can make it work by manually setting the compatibility
mode for the OS version that your program originally supported.
I've had programs install in compatibility mode, but
misbehave in some manner or other.

If the failure has no decipherable error message, the program
may not be at fault. The underlying problem may be some incompatible
function of a hardware driver.

One question is, "what is the definition of new?"
Is this a "new" win10-compatible program"?
Or a "different" "old" program you're trying to install
on for the first time on win10?
If it's the latter, now would be a good time to look
for an upgraded version or an alternative win10-compatible
program.
If that's not possible, do some googling for a solution for
that particular program. I've found chasing compatibility
issues to be frustrating if someone hasn't already figgered it out.

The old program was Sonar Professional, which I ran on W7. It's
compatible with W10, though.
The other two, MuseScore 2 and Sibelius First, are new to me but they
are both compatible with W10.

I'd look at the sound driver and sound configuration.
If you have motherboard sound hardware and plugin sound-related
devices, you may be able to disable the onboard in the bios or thru
device manager.

I had this thought as well.
I have two sound cards and the onboard sound. When I disable one of
these sound cards, all three applications do work!
So - problem solved, and I need to look for a new sound card!

Fokke

This computer has a PCI gigabit ethernet card. The only way I could make
it work was to disable the onboard LAN in the BIOS. Disabling in Device
Manager didn't help.