PCbanter

PCbanter (http://www.pcbanter.net/index.php)
-   Printing and Faxing with Windows XP (http://www.pcbanter.net/forumdisplay.php?f=39)
-   -   can't decompress files to set up Fax Services (http://www.pcbanter.net/showthread.php?t=766872)

Rebecca S April 18th 05 06:08 AM

can't decompress files to set up Fax Services
 
Im trying to set up the fax feature. My computer is new and came with SP2
pre-installed.

When I try to add fax services from windows components wizard, I get the
message : "Setup cannot copy the file fxsperf.dl_ "

I read in another post that I might need to decompress the files with the
"Win32 Cabinet Self-Extractor" but when I try to do that with the files in
the I386 folder I get the message "a required resource cannot be located"

Any Ideas on what I should try next?

thanks
rebecca

Byte April 18th 05 06:28 PM

To enable ZIP folder support run this command: regsvr32 zipfldr.dll.
Restart Windows for the change to take effect.

"Rebecca S" wrote:

Im trying to set up the fax feature. My computer is new and came with SP2
pre-installed.

When I try to add fax services from windows components wizard, I get the
message : "Setup cannot copy the file fxsperf.dl_ "

I read in another post that I might need to decompress the files with the
"Win32 Cabinet Self-Extractor" but when I try to do that with the files in
the I386 folder I get the message "a required resource cannot be located"

Any Ideas on what I should try next?

thanks
rebecca


Rebecca S April 19th 05 06:09 PM

I did that but I'm still getting the same error messages.
any other ideas?
rebecca

"Byte" wrote:

To enable ZIP folder support run this command: regsvr32 zipfldr.dll.
Restart Windows for the change to take effect.

"Rebecca S" wrote:

Im trying to set up the fax feature. My computer is new and came with SP2
pre-installed.

When I try to add fax services from windows components wizard, I get the
message : "Setup cannot copy the file fxsperf.dl_ "

I read in another post that I might need to decompress the files with the
"Win32 Cabinet Self-Extractor" but when I try to do that with the files in
the I386 folder I get the message "a required resource cannot be located"

Any Ideas on what I should try next?

thanks
rebecca


Byte April 20th 05 04:04 PM

You can do a Search of your harddrive for the fxsperf.dll file. But, you
should already have a copy of it in: C:\Windows\ServicePackFiles\i386
If it is listed as fxsperf.dl_ that means it is zipped/compressed.
If it is listed as fxsperf.dll then you can copy/paste or drag and drop it.

"Rebecca S" wrote:

I did that but I'm still getting the same error messages.
any other ideas?
rebecca

"Byte" wrote:

To enable ZIP folder support run this command: regsvr32 zipfldr.dll.
Restart Windows for the change to take effect.

"Rebecca S" wrote:

Im trying to set up the fax feature. My computer is new and came with SP2
pre-installed.

When I try to add fax services from windows components wizard, I get the
message : "Setup cannot copy the file fxsperf.dl_ "

I read in another post that I might need to decompress the files with the
"Win32 Cabinet Self-Extractor" but when I try to do that with the files in
the I386 folder I get the message "a required resource cannot be located"

Any Ideas on what I should try next?

thanks
rebecca


Rebecca S April 21st 05 02:24 AM

it's a .dl_ file, and I can't get it (or any of them) to decompress.
rebecca

"Byte" wrote:

You can do a Search of your harddrive for the fxsperf.dll file. But, you
should already have a copy of it in: C:\Windows\ServicePackFiles\i386
If it is listed as fxsperf.dl_ that means it is zipped/compressed.
If it is listed as fxsperf.dll then you can copy/paste or drag and drop it.

"Rebecca S" wrote:

I did that but I'm still getting the same error messages.
any other ideas?
rebecca

"Byte" wrote:

To enable ZIP folder support run this command: regsvr32 zipfldr.dll.
Restart Windows for the change to take effect.

"Rebecca S" wrote:

Im trying to set up the fax feature. My computer is new and came with SP2
pre-installed.

When I try to add fax services from windows components wizard, I get the
message : "Setup cannot copy the file fxsperf.dl_ "

I read in another post that I might need to decompress the files with the
"Win32 Cabinet Self-Extractor" but when I try to do that with the files in
the I386 folder I get the message "a required resource cannot be located"

Any Ideas on what I should try next?

thanks
rebecca


DAVID MURPHY April 28th 05 10:31 PM

1. Click on the Windows Start Menu.

2. Click Run.

3. Type esentutl /p %windir%\security\database\secedit.sdb in the Open
box, and click OK.

4. Install IIS through the Control Panel Add/Remove Windows Components
applet.



And Bob's your uncle



"Rebecca S" wrote in message
...
it's a .dl_ file, and I can't get it (or any of them) to decompress.
rebecca

"Byte" wrote:

You can do a Search of your harddrive for the fxsperf.dll file. But, you
should already have a copy of it in: C:\Windows\ServicePackFiles\i386
If it is listed as fxsperf.dl_ that means it is zipped/compressed.
If it is listed as fxsperf.dll then you can copy/paste or drag and drop
it.

"Rebecca S" wrote:

I did that but I'm still getting the same error messages.
any other ideas?
rebecca

"Byte" wrote:

To enable ZIP folder support run this command: regsvr32 zipfldr.dll.
Restart Windows for the change to take effect.

"Rebecca S" wrote:

Im trying to set up the fax feature. My computer is new and came
with SP2
pre-installed.

When I try to add fax services from windows components wizard, I
get the
message : "Setup cannot copy the file fxsperf.dl_ "

I read in another post that I might need to decompress the files
with the
"Win32 Cabinet Self-Extractor" but when I try to do that with the
files in
the I386 folder I get the message "a required resource cannot be
located"

Any Ideas on what I should try next?

thanks
rebecca




Rebecca S April 29th 05 06:54 AM

Thank You!!
It's working now.
rebecca

"DAVID MURPHY" wrote:

1. Click on the Windows Start Menu.

2. Click Run.

3. Type esentutl /p %windir%\security\database\secedit.sdb in the Open
box, and click OK.

4. Install IIS through the Control Panel Add/Remove Windows Components
applet.



And Bob's your uncle



"Rebecca S" wrote in message
...
it's a .dl_ file, and I can't get it (or any of them) to decompress.
rebecca

"Byte" wrote:

You can do a Search of your harddrive for the fxsperf.dll file. But, you
should already have a copy of it in: C:\Windows\ServicePackFiles\i386
If it is listed as fxsperf.dl_ that means it is zipped/compressed.
If it is listed as fxsperf.dll then you can copy/paste or drag and drop
it.

"Rebecca S" wrote:

I did that but I'm still getting the same error messages.
any other ideas?
rebecca

"Byte" wrote:

To enable ZIP folder support run this command: regsvr32 zipfldr.dll.
Restart Windows for the change to take effect.

"Rebecca S" wrote:

Im trying to set up the fax feature. My computer is new and came
with SP2
pre-installed.

When I try to add fax services from windows components wizard, I
get the
message : "Setup cannot copy the file fxsperf.dl_ "

I read in another post that I might need to decompress the files
with the
"Win32 Cabinet Self-Extractor" but when I try to do that with the
files in
the I386 folder I get the message "a required resource cannot be
located"

Any Ideas on what I should try next?

thanks
rebecca





angie May 5th 06 09:52 AM

can't decompress files to set up Fax Services
 
thank you great help

"DAVID MURPHY" wrote:

1. Click on the Windows Start Menu.

2. Click Run.

3. Type esentutl /p %windir%\security\database\secedit.sdb in the Open
box, and click OK.

4. Install IIS through the Control Panel Add/Remove Windows Components
applet.



And Bob's your uncle



"Rebecca S" wrote in message
...
it's a .dl_ file, and I can't get it (or any of them) to decompress.
rebecca

"Byte" wrote:

You can do a Search of your harddrive for the fxsperf.dll file. But, you
should already have a copy of it in: C:\Windows\ServicePackFiles\i386
If it is listed as fxsperf.dl_ that means it is zipped/compressed.
If it is listed as fxsperf.dll then you can copy/paste or drag and drop
it.

"Rebecca S" wrote:

I did that but I'm still getting the same error messages.
any other ideas?
rebecca

"Byte" wrote:

To enable ZIP folder support run this command: regsvr32 zipfldr.dll.
Restart Windows for the change to take effect.

"Rebecca S" wrote:

Im trying to set up the fax feature. My computer is new and came
with SP2
pre-installed.

When I try to add fax services from windows components wizard, I
get the
message : "Setup cannot copy the file fxsperf.dl_ "

I read in another post that I might need to decompress the files
with the
"Win32 Cabinet Self-Extractor" but when I try to do that with the
files in
the I386 folder I get the message "a required resource cannot be
located"

Any Ideas on what I should try next?

thanks
rebecca





[email protected] March 14th 17 06:42 AM

can't decompress files to set up Fax Services
 
DAVID MURPHY於 2005年4月29日星期五 UTC+8上午5時31分11秒寫道:
1. Click on the Windows Start Menu.

2. Click Run.

3. Type esentutl /p %windir%\security\database\secedit.sdb in the Open
box, and click OK.

4. Install IIS through the Control Panel Add/Remove Windows Components
applet.



And Bob's your uncle



"Rebecca S" wrote in message
...
it's a .dl_ file, and I can't get it (or any of them) to decompress.
rebecca

"Byte" wrote:

You can do a Search of your harddrive for the fxsperf.dll file. But, you
should already have a copy of it in: C:\Windows\ServicePackFiles\i386
If it is listed as fxsperf.dl_ that means it is zipped/compressed.
If it is listed as fxsperf.dll then you can copy/paste or drag and drop
it.

"Rebecca S" wrote:

I did that but I'm still getting the same error messages.
any other ideas?
rebecca

"Byte" wrote:

To enable ZIP folder support run this command: regsvr32 zipfldr.dll.
Restart Windows for the change to take effect.

"Rebecca S" wrote:

Im trying to set up the fax feature. My computer is new and came
with SP2
pre-installed.

When I try to add fax services from windows components wizard, I
get the
message : "Setup cannot copy the file fxsperf.dl_ "

I read in another post that I might need to decompress the files
with the
"Win32 Cabinet Self-Extractor" but when I try to do that with the
files in
the I386 folder I get the message "a required resource cannot be
located"

Any Ideas on what I should try next?

thanks
rebecca



Thanks a lot!!
It still works on Windows Server 2003 R2.


All times are GMT +1. The time now is 09:44 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright © 2004 - 2006 PCbanter
Comments are property of their posters