View Single Post
  #16  
Old August 23rd 06, 02:40 AM posted to microsoft.public.windowsupdate,alt.sys.pc-clone.dell,microsoft.public.windowsxp.hardware
Ben Myers
external usenet poster
 
Posts: 20
Default WGA: replace motherboard but keep my copy of XP?

A reasonable chance, anyway. But you won't know for sure until you swap in
known good components one by one. Without more sophisticated electronic gear,
one at a time switching of parts is the best way to troubleshoot... Ben Myers

On Tue, 22 Aug 2006 23:27:00 GMT, Matt wrote:

So you think there's a decent chance the CPU is okay?

Ben Myers wrote:
My first try would be to replace the motherboard. Next, the power supply. Some
people might try a new power supply first... Ben Myers

On Tue, 22 Aug 2006 17:20:21 GMT, Matt wrote:


Matt wrote:


I press the power button and I hear two quick little beeps, a pause,
then six longer beeps, all the beeps together taking about three seconds.

The following page documents the POST beep codes and the diagnostic
lights on the back of the motherboard:

http://support2.jp.dell.com/docs/sys...0/advanced.htm

The diagnostic lights are lit as follows:
A,B,D: green
C: yellow

I just noticed that before the lights go into the pattern above, they
briefly (1/2 second) show the following pattern:
A,B: green
C,D: yellow
which has the meaning "Memory modules are detected, but a memory failure
has occurred." As I mentioned previously, the RAM sticks passed
memtest-86 in another computer.


The beep code for six beeps (or should I also count the two quick little
beeps?) indicates "8042 Gate A20 cannot be toggled" and "The keyboard
controller failed its test".

The lights indicate "Microprocessor has failed a BIOS test."

Ads