View Single Post
  #4  
Old April 7th 07, 04:17 AM posted to microsoft.public.windowsxp.basics
BR549
external usenet poster
 
Posts: 63
Default how to pause or freeze a quickly flashing screen?

"Bevy_Jeter" wrote in message
...
I've tried unsuccessfully the following keys: Pause/Break, Esc,
ctl/break.
I've also tried unsuccessfully to capture the screen using: print screen
&
ctl/c.

I did finally see the screen by continually pressing F8 key after booting
until the "Advanced Startup Options for Windows" screen displayed whereby
I
selected "Disable Auto restart on system failure" & then the blue screen
with
text displayed & stopped during the display whereby I was able to read the
text, but the screen did not give me a means to advance past that screen,
so
I powered off. The following is the text from that blue screen:

"A problem has been detected & windows has been shut down to prevent
damage
to your computer. If this is the 1st time you've seen this stop error
screen, restart your computer. If this appears again, follow these steps:
Run a system diagnostic utility supplied by the hardware manufacturer. In
particular, run a memory check, & check for faulty or mismatched memory.
Try
changing video adapters. Disable or remove any newly installed hardware &
drivers. Disable or remove any newly installed software. If you need to
use
Safe Mode to remove or disable components, restart your computer, press F8
to
select Advanced Startup Options, & then select Safe Mode. Technical
information: Stop. Oxoooooo7F ox00000000 0x00000000 0x00000000
ox00000000.
Beginning dump of physical memory."

I've not tried to follow the above screen text because when I took my PC
to
a help counter person and they plugged it in, my problem did not happen &
the
PC worked just fine. But when I took the PC home & turned it on, my same
problem repeats. I've tried to figure why this happens. The only
difference
is that the help counter did not use my power cord, they used their's. So
I
took my power cord to a help counter where they tested the cord & stated
the
cord is ok. Anybody got a suggestion as to why different results?

The device manager does not show any conflicts/problems.


Thank You, Bevy_Jeter


The only other difference between your home and the store you bought it from
is the environment and the AC. I would suspect one or the other. You
could try taking it back again to see if was just a fluke that it worked
there.


Ads