Thread: nslookup error
View Single Post
  #2  
Old February 16th 10, 04:59 AM posted to microsoft.public.windowsxp.network_web
John Wunderlich
external usenet poster
 
Posts: 1,466
Default nslookup error

=?Utf-8?B?dHJhbnQ=?= wrote in
:

Hello,

When I use nslookup I get the error:

*** Can't find server name for address 192.168.3.1: Non-existent
domain *** Default servers are not available
Server: UnKnown
Address: 192.168.3.1

192.168.3.1 is my gateway's address (the router)

I have my TCP/IP settings to automatically fetch both my IP and
the DNS servers.

Doing some searching on the net some people say I need to create a
PTR record for this reverse lookup - but I can't figure out how to
do this. One article says there should be a DNS Management tool
under Control Panel - Administrative Tools but I do not have
this...

How do I resolve this?

WinXP SP3



When your router obtains its IP address from your Modem, it should
also obtain your ISP's DNS server address from your ISP as well. It
is not unusual, then, for the modem to give out its own local IP
address as the DNS server because the router will simply forward the
DNS request to the real DNS server.

My approach would be first to disconnect all the LAN connections from
your router then disconnect the power plug to the router for a few
seconds. Then reconnect power, wait about 1/2 minute, then reconnect
your LAN connections. (ie cycle power and reset your router).

If that doesn't work, you can find your ISP's DNS Server addresses
from the help pages of your ISP's website and manually enter that
address in your network configuration. That should get you going
until you can discover why your router is not handling DNS properly.

HTH,
John

Ads