Cool thanks.
-----Original Message-----
I know that, just giving a reference to one that will=20
work, if they are
unable to roll back so they can request it from intel.

"richard" wrote in message
...
Cause you are using the old driver.
-----Original Message-----
i hav intel D845pebt2 mouther board, intel pro 10/100VE
on board using
driver 6.4.14.0 date 9/25/2002 no probiem here


"richard" wrote in message
...
I appears that everyone I have found so far having the
problem has 845-875 chipsets with intel pro/100 and
pro/1000 nic cards built onto the boards. People have
replaced the boards and disabled the onboard nic card or
rolled back the driver and restored audio and video.
-----Original Message-----
If you can tell me the versions of the driver in
question, as well as the
model of the card, I can have one of ours testers try=20
to
reproduce this. If
it is causing an issue, we can work with Intel to fix
it.

--=20
John Holmes
Developer, MSN Messenger

This posting is provided "AS IS" with no warranties,=20
and
confers no rights.
Please do not send e-mail directly to this alias. This
alias is for
newsgroup purposes only.


"richard" wrote in message
.. .
And I like the "bad" reference. The fact is that they
are not "bad" they are BAD as in when you roll back the
driver the program them works. That is the definition
of
BAD.
-----Original Message-----
Hi Richard,

The Intel NIC issue that you and others discovered in
another thread is not the only cause of
this problem. Realistically, the only way to get that
fixed is to complain to Intel --=20
unless these "bad" drivers are on WindowsUpdate...
____________________________________________
Jonathan Kay
Windows MVP, Messenger
Associate Expert
http://www.microsoft.com/windowsxp/expertzone/
Messenger Resources - http://messenger.jonathankay.com

"richard" wrote in message
.. .
Jonathan,
Alot of people have with Intel nic cards have fixed
this
problem by rolling back the driver. There is a=20
problem
with intel nic cards and messenger that really needs=20
to
be addressed.
-----Original Message-----
Greetings,

I don't believe the problem is on your side, most
likely
since your contact isn't receiving
you, something on their side is blocking it. Tell
them
to do the following:
Make sure that the Internet Connection Firewall=20
hasn't
turned on, click Start, then
click the Control Panel. If you're in category view
click Network and Internet connections
then click Network Connections. Right click your
network/internet connection, then click
Properties. Click the Advanced Tab, and verify that
the
Internet Connection Firewall is
unchecked.
If you're using a router (UPnP enabled), remove the
current port forwardings -- to do so,
click Start, All Programs, Accessories,
Communications,
Network Connections. Right-click the
"Internet Gateway" (should be under the Internet
Gateway
heading) and choose Properties.
Choose the Settings button, click each 'msmsgs'
or 'msnmsgr' entry and then choose 'Delete'
to each one. Then close Messenger (right-click the
Messenger icon, choose Exit), then restart
Messenger and try a voice/video conversation again.

Finally, both of you should run through the
Audio/Video
Tuning Wizard (click the Tools menu
in the main Messenger window, then Audio Tuning
Wizard).
___________________________________________ _
Jonathan Kay
Windows MVP, Messenger
Associate Expert
http://www.microsoft.com/windowsxp/expertzone/
Messenger Resources -=20
http://messenger.jonathankay.com




"cumi" wrote in message
. ..
Hello,
i have a dell dimension 8300 with the newest chipset
857,
i get the incoming picture and Video, but i can not
send
a
picture or video. I have no firewall or router. can
somebody tell me please why it dosen=B4t work.

Thanks for help


.



.



.



.



.