"sbelgard" wrote in message
...
Bob,

I turned off windows xp firewall on both desktop and laptop. Can ping each
IP address including that of the router that I am using to connect to
wirelessly.

When I go to add the printer it finds "Microsoft Windows Network" but no
connected printers. I have verified that both computers are in the same
workgroup. They are in MSHOME. The printer I want to use is also shared.

I am not comfortable with leaving the Windows firewall turned off. Any
suggestions?

"Bob Lin (MS-MVP)" wrote:

In this case, I would check the firewall settings first. Or this search
result may help.

troubleshooting ping issues
Jump to Can't ping outside IP or name?: 4) For the security
reasons,
many organizations block the return of ICMP (ping) packets so that ping
or
...
www.chicagotech.net/troubleshootingping.htm


--
Bob Lin, Microsoft-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com


"sbelgard" wrote in message
...
When i ping my laptop: Ip address 10.0.0.7, it comes back packets
sent =4, received=0, lost-4 (100% lost). The computer I pinged frpm IP
Address is as follows: 10.0.0.6

same result when i ping desktop from laptop.

Can you ping each other IP addresses? Posting the results of ipconfig
/all
here may help.

--
Bob Lin, Microsoft-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com


"sbelgard" wrote in message
...
I have a desktop with printer installed on it. Prints fine when
connected
through desktop. I want to use this printer wirelessly through my
NetGear
wireless router. When i go to add the printer, the wizard does not
find
the
network. Any ideas on how to get me started and what i need to look
for
to
make the Desktop visible to the wireless laptop to print.

I had this connected once before, but lost my connection and ability
to
see
it when I changed from a Linksys router (G) to a Netgear router(N).

Both computers are running Windows Xp. I also have 2 other laptops
that
run
Vista. Would like to be able to print from those also.

Any help would be greatly appreciated.

Sonya


Did you follow the instructions in the printer manual about sharing and
printing? Don't they say to install the printer software on all computers
that expect to access the printer?

Did you enable file and printer sharing in all firewalls? It seems to me
that you didn't given that ping didn't work.

Jim