Ok, let try this:

01. Control Panel / [Network and Internet Connections] / Network
Connections.
02. Right-click Local Area Connection and press Properties.
03. Select Internet Protocol (TCP/IP) and press Properties.
04. On the General tab, press Advanced.
05. On the WINS tab, check Enable NetBIOS over TCP/IP and press OK.
06. Press OK and Close.
07. Right-click My Computer and press Manage.
08. Expand Services and Applications.
09. If the Computer Browser service is NOT started, right-click Computer
Browser and press Start. Right-click Computer Browser and press Properties.
Set Startup type to Automatic and press Apply and OK.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Yes, I have. Found non in Event Viewer.

Please advise the steps to enable "File and Printer" share - install
which -
Client or Protocol or Service? Do I need XP CD disc for each install?
Thanks.

"Michael D. Alligood" wrote in message
...
Have you tried looking in the Event Viewer on any of your computers to
see
if an error id has been generated?

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
That box is gray out with check.
Please tell me steps how to set up all the other computers in our
office.
Thank you.

"Michael D. Alligood" wrote in message
...
In the Local Area Connection properities, you should see a box that
states,
"This connection uses the following items..." You should see "File
and
Print
Sharing for Microsoft Networks" checked.

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Michael, just to make sure.
Please tell me the steps to enable "File & Print Sharing for
Microsoft
Network"?

"Michael D. Alligood" wrote in message
...
Hve you enabled "File and Print Sharing for Microsoft Networks"?

--
Best of luck!

Michael D. Alligood
MCSA, MCP, CCNA, A+,
Network+, i-Net+, CIW A, CIW CI


"AG Young" wrote in message
...
Michael, thank for your advise. Done, reset the button.
Also reset the router software too. Still unable to share
files
and
printer.


"Michael D. Alligood" wrote in
message
...
Sorry, I know you addressed Doug but I have a question about
your
router.
An
MR814v2 is a wireless router. I see that your connected via
ethernet
cables,
is that correct? Also, you might want to try and reset the
router.
There
should be a very small reset button on the back.