It's also still showing up on the Print Screen General Tab. It actually has
the Dell Printer listed twice. Beside one it says (copy 1) If I highlight
that one it says Status: Offline Documents 4 On the other it says Status:
Offline Documents: 1 Down in the icon bar at the bottom right of the screen
it has the icon of the printer with a red X over it. It won't let me bring
up any of these 'documents' though.
"lvee" wrote:
to uninstall the old printer completely from your pc you'll need to use the
regedit..
here's a link for the How-To
http://www.winguides.com/registry/display.php/110/
Another alternative;
There is a program that you can use, if you can stay on ling enough to
install it.
It's called RegSeeker. What you can do is basically the same thing. Type
in the name of the program that you want to search for and it will find the
entries for you all at once,
It's a free program, here's the link,
http://www.hoverdesk.net/freeware.htm
"Lady In Need" wrote in message
...
Okay.. now this is really Strange. From Add/Remove programs: HP
unistalled.
No problems. When I clicked on the Dell Printer it said last used
8/15/2003. I clicked on Change/Remove and a box popped up that said:
The Del AI0 Printer A940 is currently in use. Please wait until printer
has
finished printing and then uninstall. LOL I haven't used it! Why is it
saying this? How do I unistall now?
"Lady In Need" wrote:
The only old thing that would be on there would be a previous printer.
I
went into System Info .. Hardware... and everything had OK beside it. I
did
however see two old printers still on there. A Dell Printer and an HP
Desk
Jet. So I will unistall those two. As the HP All in One is all I have
hooked up.
There was a sub category under printers called 'Problem Devices' Which
showed up no name just the following:
Under Device:
Not Available
Under PNP Device ID:
ROOT/IMAGE/0000
Under Error Code:
The drivers for this device are not installed
"lvee" wrote:
Open your Help and support, click start Help and support. Look for
the
section, 'Pick a Task', and click on Use Tools to view your computer
information....
Then, in the left side pane click on System Information, then 'Find
hardware
on your installed on your computer.
You'll see a status bar while data is being collected. Everything you
have
installed will be listed, look for anything that either says unknown,
or has
any indicators that there is a conflict, you should at least be able to
see
what type of device it is by the category that it's in.
Okay, so you know you have the camera and the All-In-One, did have
anything
else at one time hooked up to your computer...fax machine, cd burner,
old
printer?
There is an uninstall option, you will find it in the device manager,
go to
imaging devices, expand the group by clicking the + sign, highlight
the
device and right clickuninstall...but lets try to find out what it is
first.
"Lady In Need" wrote in message
...
HI Ivee! I was able to get to device manager with your new
instructions.
And find Properties. No problem at all. Question about the driver
update.
There were 3 things listed under imaging device. The All in One HP.
The
Camera. Unknown device. The one that had a Yellow Warning wasn't
the
camera. It was the third thing listed. The Unknown Device. I tried
to
udate the driver on it but no hardware could be found for it. So I
disabled
it. Is there a way to remove it? Not sure how to do that if I don't
know
what it is. lol Or am I totally off here? Is it the camera
because it
was
below it?? I didn't think so because it was stemming directly from
Imaging
Devices like the other two. Not stemming from the camera. I'll
be
going
to town today and will get the other items needed to go through the
rest
of
the suggestions in the post. Thanks! 
"lvee" wrote:
You were still able to get to device manager, so that's good, but I
may
not
have given good instructions. Go to Start. My Computer ..highlight
MY
Computer, and while it's highlighted, right click, then at the
bottom of
that box that opens, properties will be listed..if it isn't working,
post
back.
Okay, with device manager open, and the image device selected , go
to the
Driver Tab, and update the driver.
If that doesn't do the trick,, remove your digital camera..you may
have
an
icon in your system tray..it's located in the lower right corner of
your
screen, near the time, and other entries might be Zone Alarm, your
Antivirus..anyway it's green and if you click on it will say Safely
remove
hardware..or something like that. Before you remove your camera,
see if
it's listed there..follow the instructions about remove the camera,
and
when
that's done it's safe to unplug it from your computer. Then
uninstall the
software, it should have an uninstall file. See if the error is
corrected.
Now, as far as those errors you posted..you did a good job!
Everything
you
need to know, or do is right there.
The printer...fro example..
To find the vendors
In Control Panel, open Printers and Faxes.
Right-click the appropriate printer and then click Properties.
On the Advanced tab, clear the Enable advanced printing features
check
box.
Rather than going thru all this...are you able to uninstall your
printer
for
any length of time? When you're not working? Because, if it's a
hardware
conflict, in my opinion, the easiest way to pinpoint it is to remove
each
piece of hardware, one at a time, waiting in between to see if the
problem
persists. Process of Elimination.
Sadly, it likely is bad ram...don't panic, it's no big deal. But,
it
might
be that your cpu is overheating...it might need to be cleaned, lots
of
dust
can build up and cause the fans to not work as well as it should.
You pc
must be powered off,, unplugged and then you need to ground
yourself,
touch
the case or something before you open the cpu...then, having
purchased a
can
of air from a computer store ( of course you'll want to do that
before
you
open the cpu  ) spray the dust out of your pc. And if your tower
is
kept
in a closed compartment of a desk, open the door to let the air
vent
better.
Back to ram..
Get your Dell manual, look for Ram..it will tell you what type you
have,
and
how to remove and replace it. If you go to a computer store, like
Best
Buy,
or Circuit City..I don't know what you have in your neck of the
woods..
they
will be able to help you. Your pc either came with 1, or 2 sticks
of
ram.
If it came with two, you can, after reading your manual, remove
one...then
wait to see if the pc acts up. If it doesn't, then you know that
stick
is
bad...if it does, then replace that stick, and remove the
other..elimination
don't ya know!.. If one, or both are bad, you can replace them with
new.
"Lady In Need" wrote in
message
...
Okay.. this is weird. I couldn't get to Device Manager in the way
you
told
me. When I clicked on My Com there was no 'Properties' there that
I
could
find. After some looking I found it this way. Start; Control
Panel;
Performance & Maint; System; Hardware; Device Manager That
brought
up
its
own little box which has all the different part etc... I opened
them
all
and the only thing I saw was one yellow exclamation point.
Under
imaging
devices:
Agfa e photo 1280 Digitial Camera
hp psc 1310 series
**Yellow !** Unknown Device
Did I do this correctly?? One other thing. I've not unistalled
the
HP
All
in One yet. I'm a PS on eBay and have to ship daily and need it
to
print
shipping labels. I will catch up today on all printing and
unistall it
as
suggested. No shut downs since the last time I posted one. A
couple
days
ago I believe.
"Lady In Need" wrote:
Good morning Ivee... Thank you for your condolences. It's the
first
close
death for my girls and even though teens they're taking it much
harder
than
expected. Sorry for the delay. Now...
It's very strange that the errors are mainly coming up as win
2000.
When
I
purchased this system from Dell (supposedly new.. it came with
XP) So
I
never
upgrdaded Makes me wonder about Dell now. Hmmmm......
Here's the very first warning error, 3/15 I honestly can't
remember
if
this
is when it started or not.  I'll post another from beginning
of
April
when I know it was happening. But here's the first:
The Application Management service terminated with the following
error:
The specified module could not be found.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Details
Product: Windows Operating System
ID: 7023
Source: Service Control Manager
Version: 5.0
Component: System Event Log
Symbolic Name: EVENT_SERVICE_EXIT_FAILED
Message: The %1 service terminated with the following error:
%2
Explanation
The specified service stopped unexpectedly with the error
indicated in
the
message. The service closed safely.
User Action
To troubleshoot the error:
Review the error information displayed in the message.
To display the WIN32_EXIT_CODE error that SCM encountered, at the
command
prompt, type
sc query service name
The information displayed can help you troubleshoot possible
causes
for
the
error.
Version: 5.2
Symbolic Name: EVENT_SERVICE_EXIT_FAILED
Message: The %1 service terminated with the following error:
%2
Explanation
The specified service stopped unexpectedly with the error
indicated in
the
message. The service closed safely.
User Action
To troubleshoot the error:
Review the error information displayed in the message.
To display the WIN32_EXIT_CODE error that SCM encountered, at the
command
prompt, type
sc query service name
The information displayed can help you troubleshoot possible
causes
for
the
error.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Now here's an error from April 2 when I know for certain this
happened.
The server {F3A614DC-ABE0-11D2-A441-00C04F795683} did not
register
with
DCOM
within the required timeout.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Details
Product: Windows Operating System
ID: 10010
Source: DCOM
Version: 5.0
Component: System Event Log
Symbolic Name: EVENT_RPCSS_SERVER_START_TIMEOUT
Message: The server %1 did not register with DCOM within the
required
timeout.
Explanation
The Component Object Model (COM) infrastructure tried to start
the
named
server; however, the server did not reply within the required
timeout
period.
There might be a deadlock, or the program might not have
responded to
the
server initialization code within the timeout period of two
minutes.
User Action
If the problem continues to occur, contact the program vendor.
To determine the program vendor
Using Regedit, navigate to the following registry value
HKCR\Clsid\clsid value\localserver32
The clsid value is the information displayed in the message.
In the right pane, double-click Default. The Edit String dialog
box is
displayed. Leave this dialog box open.
Click Start, and then click My Computer.
Using the information displayed in the Value data box of the Edit
String
dialog box, navigate to the program.
Right-click the program name, and then click Properties.
The Properties dialog box for the program is displayed.
To determine who the vendor is for this program, refer to the
Version
tab.
Version: 5.2
Symbolic Name: EVENT_RPCSS_SERVER_START_TIMEOUT
Message: The server %1 did not register with DCOM within the
required
timeout.
Explanation
The Component Object Model (COM) infrastructure tried to start
the
named
server; however, the server did not reply within the required
timeout
period.
There might be a deadlock, or the program might not have
responded to
the
server initialization code within the timeout period of two
minutes.
User Action
If the problem continues to occur, contact the program vendor.
To determine the program vendor
Using Regedit, navigate to the following registry value
HKCR\Clsid\clsid value\localserver32
The clsid value is the information displayed in the message.
In the right pane, double-click Default. The Edit String dialog
box is
displayed. Leave this dialog box open.
Click Start, and then click My Computer.
Using the information displayed in the Value data box of the Edit
String
dialog box, navigate to the program.
Right-click the program name, and then click Properties.
The Properties dialog box for the program is displayed.
To determine who the vendor is for this program, refer to the
Version
tab.
~~~~~~~~~~~~~~~~~~~~~~
Remember I talked about my HP all in One not being able to scan?
This
looks
like a Warning error pertaining to it thought I'd post it as
well.
Details
Product: Windows Operating System
ID: 10010
Source: DCOM
Version: 5.0
Component: System Event Log
Symbolic Name: EVENT_RPCSS_SERVER_START_TIMEOUT
Message: The server %1 did not register with DCOM within the
required
timeout.
Explanation
The Component Object Model (COM) infrastructure tried to start
the
named
server; however, the server did not reply within the required
timeout
period.
There might be a deadlock, or the program might not have
responded to
the
server initialization code within the timeout period of two
minutes.
User Action
If the problem continues to occur, contact the program vendor.
To determine the program vendor
Using Regedit, navigate to the following registry value
HKCR\Clsid\clsid value\localserver32
The clsid value is the information displayed in the message.
In the right pane, double-click Default. The Edit String dialog
box is
displayed. Leave this dialog box open.
Click Start, and then click My Computer.
Using the information displayed in the Value data box of the Edit
String
dialog box, navigate to the program.
Right-click the program name, and then click Properties.
The Properties dialog box for the program is displayed.
To determine who the vendor is for this program, refer to the
Version
tab.
Version: 5.2
Symbolic Name: EVENT_RPCSS_SERVER_START_TIMEOUT
Message: The server %1 did not register with DCOM within the
required
timeout.
Explanation
The Component Object Model (COM) infrastructure tried to start
the
named
server; however, the server did not reply within the required
timeout
period.
There might be a deadlock, or the program might not have
responded to
the
server initialization code within the timeout period of two
minutes.
User Action
If the problem continues to occur, contact the program vendor.
To determine the program vendor
Using Regedit, navigate to the following registry value
HKCR\Clsid\clsid value\localserver32
The clsid value is the information displayed in the message.
In the right pane, double-click Default. The Edit String dialog
box is
displayed. Leave this dialog box open.
Click Start, and then click My Computer.
Using the information displayed in the Value data box of the Edit
String
dialog box, navigate to the program.
Right-click the program name, and then click Properties.
The Properties dialog box for the program is displayed.
To determine who the vendor is for this program, refer to the
Version
tab.
Details
Product: Windows Operating System
ID: 54
Source: Print
Version: 5.0
Component: Application Event Log
Symbolic Name: MSG_BAD_JOB
Message: Document %1 was corrupted and has been deleted. The
associated
driver is: %2.
Explanation
The print job caused the print spooler to stop more than once, so
the
print
spooler deleted the job and will not try to print it again.
To force spooling with the RAW data type
In Control Panel, open Printers and Faxes.
Right-click the appropriate printer and then click Properties.
On the Advanced tab, clear the Enable advanced printing features
check
box.
User Action
Try updating the printer driver with a newer version from the
vendor
if
one
is available.
If updating the driver does not work, try forcing the print queue
to
spool
with the RAW (ready to print) data type.
To force spooling with the RAW data type
In Control Panel, open Printers.
Right-click the appropriate printer and then click Properties.
On the Advanced tab, clear the Enable advanced printing features
check
box.
~~~~~~~~~~~~~~~
I'll post this and then do the device manager. Again THANK YOU
so
much
for
all your time and effort in helping me.  )
"lvee" wrote:
If your
copy and paste function does not work for that, just click
and
highlight
the text, then, from your keyboard press the Ctrl key and the
'CO
key.
Correction, when copying, press Ctrl plus the C key, not
CO....sorry,
major
typo!
"lvee" wrote in message
...
|