View Single Post
  #10  
Old March 10th 19, 06:36 PM posted to alt.windows7.general,alt.comp.os.windows-10
lonelydad
external usenet poster
 
Posts: 90
Default Autio input to a PC from bluetooth (or a phone cable?)

nospam wrote in
:

In article , micky
wrote:

You could take your ausio out headphone connection on the phone and
run it into the line in connection on the pc. Then just simply
listen to line in on pc. That's assuming phone has a headphone jack
in it.


Wow. That's so obvious, now that you said it. The cable is in the
car so I can't check it now.

I don't know that I have line-in. I have microphone-in. That will
probably be good enough?


no. line level is higher.

it *might* work if you keep the volume low so it doesn't overload
anything.

If your PC has a line in, it is usually only on the back I/O panel. It
should be the light blue connector. Even with using line in you should
start with the volume on the phone turned down, then find a good setting
for your phone output that doesn't require turning up the volume on the
PC too far, while not causing distortion due to too large of a line
input.
Ads