+12 VOLT Indicator on Winbond Hardware Doctor
How far out is the BIOS reading from the real reading?
50% + ? Please advise.
"w_tom" wrote in message
...
Voltages measured by BIOS are not accurate. Either confirm
those voltage readings with a 3.5 digit multimeter, OR
calibrate the BIOS meter with a 3.5 digit meter.
The power supply should be more than sufficient. But the
devil is in the details. A power supply with more than enough
overall wattage may provide insufficient current on one
voltage output. Again, this is why multimeter is required.
|