Driver for Microtek Scanmaker 3600
"pg" wrote in message
...
On Feb 11, 3:11 am, Martin Trautmann wrote:
On Tue, 10 Feb 2009 22:39:28 -0800 (PST), pg wrote:
"The scanner is not ready! Please check the scanner connection."
Did I do anything wrong??
Microteks software here is most annoying.
I don't know which is the right order, but the scanner has to be plugged
in properly before/after installing the software (I'd guess after).
Otherwise it might be ignored.
Mine can't be used via an USB hub.
- Martin
I have plugged and unplugged the scanner, rebooted the PC several
times, and even un-installed and re-installed the software, and still
I got the error !!!
I checked the scanner as well, no problem.
Oh well ... This is getting very very weird !!
----------
Forgot to mention both my previous MicroTek scanners were scsi connected
using scsi ID 6 with active termination. I started out early with flatbed
scanners using the old printer port connection. Scsi seems to work best
both for connection, and, actual throughput without worry of interruption.
--
Dave
|