Steve,
Have you resolved this issue? I had a similar issue when capturing with
from a video camera that I resolved. Try going to the top of your window and
clicking on Clip - Audio and make sure it is not muted there. Also, did you
check the "set audio levels" down by the storyboard after you did your drag
and drops. You can set it to have sound from video or sound from other
sources. Hope this helps you.

I am having a similar same problem but I get no sound on capture. I am
capturing through a VCR and the video is fine. I have in the past captured
through the TV hooked in to my media center through Satelltie TV and had
sound and video, no problem. I was able to capture both audio and video from
an 8 mm camera plugged into the composite and video RCA type ports I am
trying to use for the VCR and that ran fine. I have changed the source to
every selection in the audio input selection to see if that is the problem
and the results were the same. I also made sure that all my input and output
volumes on the computer were engaged and turned up. My other files still
play sound fine, so the output settings are okay. Anyone have a clue how to
resolve this?

Maxine

"Steve Greene" wrote:

I have tried capturing VHS video into movie maker. During capture, the video
is fine and the sound plays, but when I try to play back the video, I get no
sound. I have played around with the "audio levels" with no success.

Everything should be hooked up okay-- when I capture video with Ulead Movie
Factory, it plays back with sound. Unfortunately, when I try and edit those
saved avi files in Movie Maker, they play back upside down.

Any help is greatly appreciated

Steve