View Single Post
  #3  
Old December 5th 04, 05:57 PM
Rick and Deb
external usenet poster
 
Posts: n/a
Default network adapters

I have taken the network card out and it still shows all the adapters in
devise manager. In network connections it doesn't show anything. I still
can't uninstall. It may be a bad adapter card but I still need these out
before I put another card in don't I? Thanks Chuck and sorry about post.
Yesterday was crazy, network down so I couldn't get reports from client
computer to host to send to you. Then A drive went out
"Chuck" wrote in message
...
On Sun, 5 Dec 2004 07:40:54 -0600, "Rick and Deb"

wrote:

I have windows xp home sp1. When I go to safe mode, go to device manger,
go
to network adapters it shows about 10 adapters in it. When I try to
uninstall it says " Failed to uninstall the device. The device may be
required to boot up computer.". I know at least 3 of them are network
cards
that is not in the computer. My network stopped working is why I even
looked
there. Any suggestions would be very helpful. Here is a list of adapters
that it shows that can not be uninstalled.

Network adapters:
Direct Parallel 5.1.2535.0
D-Link DFE-530TX+ PCI Adapter 5.397.823.2001
D-Link DFE-530TX+ PCI Adapter - Packet Scheduler Miniport5.1.2535.0
D-Link DFE-530TX+ PCI Adapter #2 - Packet Scheduler
Miniport5.1.2535.0
Realtek RTL8139 Family PCI Fast Ethernet NIC - Packet Scheduler
Miniport5.1.2535.0
WAN Miniport (IP) 5.1.2535.0
WAN Miniport (IP) - Packet Scheduler Miniport 5.1.2535.0
WAN Miniport (IPX) 5.1.2535.0
WAN Miniport (L2TP) 5.1.2535.0
WAN Miniport (PPPOE) 5.1.2535.0
WAN Miniport (PPTP) 5.1.2535.0

Here is the IP report.

Windows IP Configuration Host Name . . . . . . . . . . . . : RICK
Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . .
.
. : Broadcast IP Routing Enabled. . . . . . . . : No WINS
Proxy Enabled. . . . . . . . : NoEthernet adapter Local Area Connection
11:
Connection-specific DNS Suffix . : Description . . . . . . . . .
.
. : D-Link DFE-530TX+ PCI Adapter Physical Address. . . . . . . . .
:
00-50-BA-AE-46-F1 Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . .
.
. . : 0.0.0.0 Subnet Mask . . . . . . . . . . . : 0.0.0.0
Default Gateway . . . . . . . . . : DHCP Server . . . . . . . . .
.
. : 0.0.0.0


Rick / Deb,

Please help us to help you.
1) Provide additional information in the same thread as you start with -
don't
start additional threads. When we have to look back and forth in
different
threads for different diagnostic data, it causes fatigue, which causes
mistakes,
and hampers the diagnostic process.

2) When someone replies with an answer to your post, answer to that
reply.
This is the standard for dialogue in the various forums on the internet:
Your Post #1
My answer #1
Your post #2
My answer #2
etc

When its:
Your post #1
My answer #1
Your post #2
My answer #2
Your post #3
My answer #3
It's hard to follow the thread. Please don't post this way.

How to Compose a Good Newsgroup Post
http://dts-l.org/goodpost.htm

How to Act Smart on Usenet
http://www.catb.org/~esr/faqs/smart-questions.html

Getting Your Post Noticed - and Answered
http://www.microsoft.com/presspass/f.../Mar27pmvp.asp

Now let's see what your problem may be. I see the many adapters, in the
Everest
report. Please look under Settings - Network Connections - Local Area
Connection - Properties, under "This connection uses the following
items:", and
list what's displayed there. It's possible that unwanted protocols may be
loaded, to start. You cannot uninstall hardware devices that have
protocols
bound to them.

It also might help to know exactly what problems you're having with your
network, just in case the problem is not solely caused by excess network
adapters. Try and describe what network functions work and don't work,
from
each computer. And how are all the computers connected?

--
Cheers,
Chuck
Paranoia comes from experience - and is not necessarily a bad thing.



Ads