A Windows XP help forum. PCbanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » PCbanter forum » Microsoft Windows XP » Printing and Faxing with Windows XP
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

USB printing on a network



 
 
Thread Tools Display Modes
  #1  
Old December 4th 09, 05:42 AM posted to microsoft.public.windowsxp.print_fax
NewIT
external usenet poster
 
Posts: 2
Default USB printing on a network

My friend is printing to a printer via USB port. He is running Windows XP
and so am I.
Both our PCs are on the same network.
What is the easiest setup so can I print to his printer, please?

Thanks,


Ads
  #2  
Old December 4th 09, 05:02 PM posted to microsoft.public.windowsxp.print_fax
Lem[_2_]
external usenet poster
 
Posts: 1,218
Default USB printing on a network

NewIT wrote:
My friend is printing to a printer via USB port. He is running Windows
XP and so am I.
Both our PCs are on the same network.
What is the easiest setup so can I print to his printer, please?

Thanks,



If your computers are already configured to share files over the
network, then all you have to do is "share" the printer on your friend's
computer. Right-click on the printer icon in Printers and Faxes, choose
Properties, and then the Sharing tab. Do not use any special characters
in the "share name." Then install the printer on your computer. See
item F below.

If your computers can't share files, or if you don't know one way or the
other, see this advice from MS MVP Malke:

Quote
For XP, start by running the Network Setup Wizard on all machines (see
caveat in Item A below).

Problems sharing files between computers on a network are generally
caused by 1) a misconfigured firewall or overlooked firewall (including
a stateful firewall in a VPN); or 2) inadvertently running two firewalls
such as the built-in Windows Firewall and a third-party firewall; and/or
3) not having identical user accounts and passwords on all Workgroup
machines; 4) trying to create shares where the operating system does not
permit it.

A. Configure firewalls on all machines to allow the Local Area Network
(LAN)traffic as trusted. With Windows Firewall, this means allowing
File/Printer Sharing on the Exceptions tab. Normally running the Network
Setup Wizard on XP will take care of this for those machines.The only
"gotcha" is that this will turn on the XPSP2 Windows Firewall. If you
aren't running a third-party firewall or have an antivirus with
"Internet Worm Protection" (like Norton 2006/07) which acts as a
firewall, then you're fine. With third-party firewalls, I usually
configure the LAN allowance with an IP range. Ex. would be
192.168.1.0-192.168.1.254. Obviously you would substitute your correct
subnet. Do not run more than one firewall. DO NOT TURN OFF FIREWALLS;
CONFIGURE THEM CORRECTLY.

B. For ease of organization, put all computers in the same Workgroup.
This is done from the System applet in Control Panel, Computer Name tab.

C. Create matching user accounts and passwords on all machines. You do
not need to be logged into the same account on all machines and the
passwords assigned to each user account can be different; the
accounts/passwords just need to exist and match on all machines. DO NOT
NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY SIMPLE ONES. If you wish a
machine to boot directly to the Desktop (into one particular user's
account) for convenience, you can do this. The instructions at this link
work for both XP and Vista:

Configure Windows to Automatically Login (MVP Ramesh) -
http://windowsxp.mvps.org/Autologon.htm

D. If one or more of the computers is XP Pro or Media Center, turn off
Simple File Sharing (Folder OptionsView tab).

E. Create shares as desired. XP Home does not permit sharing of users'
home directories or Program Files, but you can share folders inside
those directories. A better choice is to simply use the Shared Documents
folder.

F. After you have file sharing working (and have tested this by
exchanging a file between all machines), if you want to share a printer
connected locally to one of your computers, share it out from that
machine. Then go to the printer mftr.'s website and download the latest
drivers for the correct operating system(s). Install them on the target
machine(s). The printer should be seen during the installation routine.
If it is not, install the drivers and then use the Add Printer Wizard.
In some instances, certain printers need to be installed as Local
printers but that is outside of this response.

/Quote

--
Lem

Apollo 11 - 40 years ago:
http://www.nasa.gov/mission_pages/ap...0th/index.html
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off






All times are GMT +1. The time now is 03:23 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 PCbanter.
The comments are property of their posters.