A Windows XP help forum. PCbanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » PCbanter forum » Microsoft Windows XP » Networking and the Internet with Windows XP
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Browsing on Some Computers on My Network



 
 
Thread Tools Display Modes
  #1  
Old July 21st 09, 10:05 PM posted to microsoft.public.windowsxp.network_web
Michael
external usenet poster
 
Posts: 229
Default Browsing on Some Computers on My Network

Two of the PCs on my home network lose their browsing connections after I log
onto the Internet. Both are configured with Windows XP SP 3. Both detect on
my network management software (Network Magic) as being connected and working
perfectly; however, when I open any browser (IE, Firefox, Google Chrome), I
initially connect to a Web page but then cannot continue browsing, as further
links do not work. After the initial page, I lose the link. Consistently, I
find that I can reboot the system and open the browser again, but the loss of
network connectivity persists.

In the case of one of the PCs, from the moment it was set up, it did not
browse properly. In the case of the other, it has worked until recently -
the past two weeks, and now behaves in the same manner as the other PC.

In both cases, the DHCP appeared to be working correctly. Network Magic
indicates that both computers are connected to my network and are functioning
properly. I have also verified that my IP addresses for all the systems in
my network are configured correctly. What do I need to do to get my
connectivity to stay active once I reboot these PCs?

I've looked in the archives, but none of the similar issues are similar
enough to help me solve my problem. Anyone have suggestions that will lead me
to a solution?

Thank you,
--
Michael D. Moore
"Respect Is Earned, Not Granted"
Ads
  #2  
Old July 21st 09, 11:01 PM posted to microsoft.public.windowsxp.network_web
GTS[_2_]
external usenet poster
 
Posts: 116
Default Browsing on Some Computers on My Network



In both cases, the DHCP appeared to be working correctly. Network Magic
indicates that both computers are connected to my network and are
functioning
properly. I have also verified that my IP addresses for all the systems
in
my network are configured correctly. What do I need to do to get my
connectivity to stay active once I reboot these PCs?

I've looked in the archives, but none of the similar issues are similar
enough to help me solve my problem. Anyone have suggestions that will lead
me
to a solution?

Thank you,
--
Michael D. Moore
"Respect Is Earned, Not Granted"


When the problem occurs can you open a web site by IP address (to narrow if
this is a connectivity or DNS problem)?

  #3  
Old July 21st 09, 11:01 PM posted to microsoft.public.windowsxp.network_web
GTS[_2_]
external usenet poster
 
Posts: 116
Default Browsing on Some Computers on My Network



In both cases, the DHCP appeared to be working correctly. Network Magic
indicates that both computers are connected to my network and are
functioning
properly. I have also verified that my IP addresses for all the systems
in
my network are configured correctly. What do I need to do to get my
connectivity to stay active once I reboot these PCs?

I've looked in the archives, but none of the similar issues are similar
enough to help me solve my problem. Anyone have suggestions that will lead
me
to a solution?

Thank you,
--
Michael D. Moore
"Respect Is Earned, Not Granted"


When the problem occurs can you open a web site by IP address (to narrow if
this is a connectivity or DNS problem)?

  #4  
Old July 21st 09, 11:22 PM posted to microsoft.public.windowsxp.network_web
Jack-MVP
external usenet poster
 
Posts: 241
Default Browsing on Some Computers on My Network

Hi
NetMagic is a 3rd party application and it changes the Default inner working
of the Network, thus it is hard to direct a person how to go about
reconfiguring the system.
On a Normal Network (No NetMagic) this is the process.
Make sure that the Software Firewall on each computer allows free local
traffic. If you use 3rd party Firewall On, Vista/XP Native Firewall should
be Off, and the active Firewall has to adjusted to your Network IP numbers
on what is some time called the Trusted Zone (consult your 3rd Party
Firewall instructions.
General example, http://www.ezlan.net/faq#trusted
Windows XP File Sharing -
http://support.microsoft.com/default...b;en-us;304040
http://support.microsoft.com/default...b;en-us;304040
Printer Sharing XP -
http://www.microsoft.com/windowsxp/u...utt_july2.mspx
Windows Native Firewall setting for Sharing XP -
http://support.microsoft.com/kb/875357
Jack (MVP-Networking).

"Michael" wrote in message
...
Two of the PCs on my home network lose their browsing connections after I
log
onto the Internet. Both are configured with Windows XP SP 3. Both detect
on
my network management software (Network Magic) as being connected and
working
perfectly; however, when I open any browser (IE, Firefox, Google Chrome),
I
initially connect to a Web page but then cannot continue browsing, as
further
links do not work. After the initial page, I lose the link.
Consistently, I
find that I can reboot the system and open the browser again, but the loss
of
network connectivity persists.

In the case of one of the PCs, from the moment it was set up, it did not
browse properly. In the case of the other, it has worked until recently -
the past two weeks, and now behaves in the same manner as the other PC.

In both cases, the DHCP appeared to be working correctly. Network Magic
indicates that both computers are connected to my network and are
functioning
properly. I have also verified that my IP addresses for all the systems
in
my network are configured correctly. What do I need to do to get my
connectivity to stay active once I reboot these PCs?

I've looked in the archives, but none of the similar issues are similar
enough to help me solve my problem. Anyone have suggestions that will lead
me
to a solution?

Thank you,
--
Michael D. Moore
"Respect Is Earned, Not Granted"


  #5  
Old July 21st 09, 11:22 PM posted to microsoft.public.windowsxp.network_web
Jack-MVP
external usenet poster
 
Posts: 241
Default Browsing on Some Computers on My Network

Hi
NetMagic is a 3rd party application and it changes the Default inner working
of the Network, thus it is hard to direct a person how to go about
reconfiguring the system.
On a Normal Network (No NetMagic) this is the process.
Make sure that the Software Firewall on each computer allows free local
traffic. If you use 3rd party Firewall On, Vista/XP Native Firewall should
be Off, and the active Firewall has to adjusted to your Network IP numbers
on what is some time called the Trusted Zone (consult your 3rd Party
Firewall instructions.
General example, http://www.ezlan.net/faq#trusted
Windows XP File Sharing -
http://support.microsoft.com/default...b;en-us;304040
http://support.microsoft.com/default...b;en-us;304040
Printer Sharing XP -
http://www.microsoft.com/windowsxp/u...utt_july2.mspx
Windows Native Firewall setting for Sharing XP -
http://support.microsoft.com/kb/875357
Jack (MVP-Networking).

"Michael" wrote in message
...
Two of the PCs on my home network lose their browsing connections after I
log
onto the Internet. Both are configured with Windows XP SP 3. Both detect
on
my network management software (Network Magic) as being connected and
working
perfectly; however, when I open any browser (IE, Firefox, Google Chrome),
I
initially connect to a Web page but then cannot continue browsing, as
further
links do not work. After the initial page, I lose the link.
Consistently, I
find that I can reboot the system and open the browser again, but the loss
of
network connectivity persists.

In the case of one of the PCs, from the moment it was set up, it did not
browse properly. In the case of the other, it has worked until recently -
the past two weeks, and now behaves in the same manner as the other PC.

In both cases, the DHCP appeared to be working correctly. Network Magic
indicates that both computers are connected to my network and are
functioning
properly. I have also verified that my IP addresses for all the systems
in
my network are configured correctly. What do I need to do to get my
connectivity to stay active once I reboot these PCs?

I've looked in the archives, but none of the similar issues are similar
enough to help me solve my problem. Anyone have suggestions that will lead
me
to a solution?

Thank you,
--
Michael D. Moore
"Respect Is Earned, Not Granted"


  #6  
Old July 23rd 09, 07:31 PM posted to microsoft.public.windowsxp.network_web
Michael
external usenet poster
 
Posts: 229
Default Browsing on Some Computers on My Network

This solved the problem on one of the PCs in my network, leaving only the one
I set up for my son.

I want to rate this one as helpful, since it solved one problem; however,
the problem on my other system is still open, so I don't want to close this
case down yet.

Thank you, Jack MVP
--
Michael D. Moore
"Respect Is Earned, Not Granted"


"Jack-MVP" wrote:

Hi
NetMagic is a 3rd party application and it changes the Default inner working
of the Network, thus it is hard to direct a person how to go about
reconfiguring the system.
On a Normal Network (No NetMagic) this is the process.
Make sure that the Software Firewall on each computer allows free local
traffic. If you use 3rd party Firewall On, Vista/XP Native Firewall should
be Off, and the active Firewall has to adjusted to your Network IP numbers
on what is some time called the Trusted Zone (consult your 3rd Party
Firewall instructions.
General example, http://www.ezlan.net/faq#trusted
Windows XP File Sharing -
http://support.microsoft.com/default...b;en-us;304040
http://support.microsoft.com/default...b;en-us;304040
Printer Sharing XP -
http://www.microsoft.com/windowsxp/u...utt_july2.mspx
Windows Native Firewall setting for Sharing XP -
http://support.microsoft.com/kb/875357
Jack (MVP-Networking).

"Michael" wrote in message
...
Two of the PCs on my home network lose their browsing connections after I
log
onto the Internet. Both are configured with Windows XP SP 3. Both detect
on
my network management software (Network Magic) as being connected and
working
perfectly; however, when I open any browser (IE, Firefox, Google Chrome),
I
initially connect to a Web page but then cannot continue browsing, as
further
links do not work. After the initial page, I lose the link.
Consistently, I
find that I can reboot the system and open the browser again, but the loss
of
network connectivity persists.

In the case of one of the PCs, from the moment it was set up, it did not
browse properly. In the case of the other, it has worked until recently -
the past two weeks, and now behaves in the same manner as the other PC.

In both cases, the DHCP appeared to be working correctly. Network Magic
indicates that both computers are connected to my network and are
functioning
properly. I have also verified that my IP addresses for all the systems
in
my network are configured correctly. What do I need to do to get my
connectivity to stay active once I reboot these PCs?

I've looked in the archives, but none of the similar issues are similar
enough to help me solve my problem. Anyone have suggestions that will lead
me
to a solution?

Thank you,
--
Michael D. Moore
"Respect Is Earned, Not Granted"



  #7  
Old July 23rd 09, 07:31 PM posted to microsoft.public.windowsxp.network_web
Michael
external usenet poster
 
Posts: 229
Default Browsing on Some Computers on My Network

This solved the problem on one of the PCs in my network, leaving only the one
I set up for my son.

I want to rate this one as helpful, since it solved one problem; however,
the problem on my other system is still open, so I don't want to close this
case down yet.

Thank you, Jack MVP
--
Michael D. Moore
"Respect Is Earned, Not Granted"


"Jack-MVP" wrote:

Hi
NetMagic is a 3rd party application and it changes the Default inner working
of the Network, thus it is hard to direct a person how to go about
reconfiguring the system.
On a Normal Network (No NetMagic) this is the process.
Make sure that the Software Firewall on each computer allows free local
traffic. If you use 3rd party Firewall On, Vista/XP Native Firewall should
be Off, and the active Firewall has to adjusted to your Network IP numbers
on what is some time called the Trusted Zone (consult your 3rd Party
Firewall instructions.
General example, http://www.ezlan.net/faq#trusted
Windows XP File Sharing -
http://support.microsoft.com/default...b;en-us;304040
http://support.microsoft.com/default...b;en-us;304040
Printer Sharing XP -
http://www.microsoft.com/windowsxp/u...utt_july2.mspx
Windows Native Firewall setting for Sharing XP -
http://support.microsoft.com/kb/875357
Jack (MVP-Networking).

"Michael" wrote in message
...
Two of the PCs on my home network lose their browsing connections after I
log
onto the Internet. Both are configured with Windows XP SP 3. Both detect
on
my network management software (Network Magic) as being connected and
working
perfectly; however, when I open any browser (IE, Firefox, Google Chrome),
I
initially connect to a Web page but then cannot continue browsing, as
further
links do not work. After the initial page, I lose the link.
Consistently, I
find that I can reboot the system and open the browser again, but the loss
of
network connectivity persists.

In the case of one of the PCs, from the moment it was set up, it did not
browse properly. In the case of the other, it has worked until recently -
the past two weeks, and now behaves in the same manner as the other PC.

In both cases, the DHCP appeared to be working correctly. Network Magic
indicates that both computers are connected to my network and are
functioning
properly. I have also verified that my IP addresses for all the systems
in
my network are configured correctly. What do I need to do to get my
connectivity to stay active once I reboot these PCs?

I've looked in the archives, but none of the similar issues are similar
enough to help me solve my problem. Anyone have suggestions that will lead
me
to a solution?

Thank you,
--
Michael D. Moore
"Respect Is Earned, Not Granted"



  #8  
Old July 23rd 09, 07:38 PM posted to microsoft.public.windowsxp.network_web
Michael
external usenet poster
 
Posts: 229
Default Browsing on Some Computers on My Network

I have not tried this yet on the system that is still giving me issues. I
tried the firewall solution offered by Jack MVP, and while it solved my issue
with one PC, the problem lingers with the other.

A while back, I did receive a DNS error message regarding DNS tables during
one of my attempts to set it up on my network, but I have not seen this
message since. I do suspect that somehow DNS entries are at the heart of it,
but it is beyond my ken. The firewall issue resulted in this behavior:

I got on the Internet and used Google to search for Spider-Man (my son likes
Spider-Man, so it seemed a decent enough test search word). Google pulled up
a reasonable list of sites. I clicked the hyperlink to a page for images of
Spider-Man. Then, I clicked on an image of Spider-Man, and Firefox just
churned until eventually telling me that it couldn't find the page. I backed
up twice and then attempted to go to Youtube, and I got the same message
about not being able to find the page.

So, what solves this issue if it's not the native firewall on the PC?

Thanks,

Michael D. Moore
Durham, NC

--
Michael D. Moore
"Respect Is Earned, Not Granted"


"GTS" wrote:



In both cases, the DHCP appeared to be working correctly. Network Magic
indicates that both computers are connected to my network and are
functioning
properly. I have also verified that my IP addresses for all the systems
in
my network are configured correctly. What do I need to do to get my
connectivity to stay active once I reboot these PCs?

I've looked in the archives, but none of the similar issues are similar
enough to help me solve my problem. Anyone have suggestions that will lead
me
to a solution?

Thank you,
--
Michael D. Moore
"Respect Is Earned, Not Granted"


When the problem occurs can you open a web site by IP address (to narrow if
this is a connectivity or DNS problem)?


  #9  
Old July 23rd 09, 07:38 PM posted to microsoft.public.windowsxp.network_web
Michael
external usenet poster
 
Posts: 229
Default Browsing on Some Computers on My Network

I have not tried this yet on the system that is still giving me issues. I
tried the firewall solution offered by Jack MVP, and while it solved my issue
with one PC, the problem lingers with the other.

A while back, I did receive a DNS error message regarding DNS tables during
one of my attempts to set it up on my network, but I have not seen this
message since. I do suspect that somehow DNS entries are at the heart of it,
but it is beyond my ken. The firewall issue resulted in this behavior:

I got on the Internet and used Google to search for Spider-Man (my son likes
Spider-Man, so it seemed a decent enough test search word). Google pulled up
a reasonable list of sites. I clicked the hyperlink to a page for images of
Spider-Man. Then, I clicked on an image of Spider-Man, and Firefox just
churned until eventually telling me that it couldn't find the page. I backed
up twice and then attempted to go to Youtube, and I got the same message
about not being able to find the page.

So, what solves this issue if it's not the native firewall on the PC?

Thanks,

Michael D. Moore
Durham, NC

--
Michael D. Moore
"Respect Is Earned, Not Granted"


"GTS" wrote:



In both cases, the DHCP appeared to be working correctly. Network Magic
indicates that both computers are connected to my network and are
functioning
properly. I have also verified that my IP addresses for all the systems
in
my network are configured correctly. What do I need to do to get my
connectivity to stay active once I reboot these PCs?

I've looked in the archives, but none of the similar issues are similar
enough to help me solve my problem. Anyone have suggestions that will lead
me
to a solution?

Thank you,
--
Michael D. Moore
"Respect Is Earned, Not Granted"


When the problem occurs can you open a web site by IP address (to narrow if
this is a connectivity or DNS problem)?


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off






All times are GMT +1. The time now is 09:54 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 PCbanter.
The comments are property of their posters.