unable to use some local printers with Remote Desktop Connection?

I have a user who is using RDC to connect to an XP box remotely for a
client. The connection works fine and he is able to access everything he
needs on the remote box but is unable to use some local printers. The
connection is setup to allow local printers. He can use the local printer
on his machine and two of the five network printers in our office. The
problem is those two are the furthest away from his desk and his local
printer is a slow inkjet. Why do some printers show up and others do not.

All of the network printers are shared from the DC and are setup as LPR
printers on the DC. The only difference in the printers is the make/model.
The two that show up are a Lexmark 3650 and a HP LJ4. The three that do not
show up are an HP LJ4200 (this is the one that I want to work, it's closest
to his desk), and HP LJ1200 and a Canon IR5000 copier/printer.

I've tried setting up the LJ 4200 locally on his pc with an IP port, but
this didn't work. Connecting via a parallel cable is not practical.

Anyone have any ideas?

Thanks,
John

I Figured this out on my own. The drivers for the local printer were not
installed on the remote machine. I installed a fake printer to LPT1 on the
remote box just to get the drivers on it, logged off and reconnected and it
installed the printer I wanted.


"John" wrote in message
...
I have a user who is using RDC to connect to an XP box remotely for a
client. The connection works fine and he is able to access everything he
needs on the remote box but is unable to use some local printers. The
connection is setup to allow local printers. He can use the local printer
on his machine and two of the five network printers in our office. The
problem is those two are the furthest away from his desk and his local
printer is a slow inkjet. Why do some printers show up and others do not.

All of the network printers are shared from the DC and are setup as LPR
printers on the DC. The only difference in the printers is the
make/model. The two that show up are a Lexmark 3650 and a HP LJ4. The
three that do not show up are an HP LJ4200 (this is the one that I want to
work, it's closest to his desk), and HP LJ1200 and a Canon IR5000
copier/printer.

I've tried setting up the LJ 4200 locally on his pc with an IP port, but
this didn't work. Connecting via a parallel cable is not practical.

Anyone have any ideas?

Thanks,
John

John I'll bet Printers connected USB were not available while any printer
connected through Parallel port were available!

"John" wrote in message
...
I have a user who is using RDC to connect to an XP box remotely for a
client. The connection works fine and he is able to access everything he
needs on the remote box but is unable to use some local printers. The
connection is setup to allow local printers. He can use the local printer
on his machine and two of the five network printers in our office. The
problem is those two are the furthest away from his desk and his local
printer is a slow inkjet. Why do some printers show up and others do not.

All of the network printers are shared from the DC and are setup as LPR
printers on the DC. The only difference in the printers is the
make/model. The two that show up are a Lexmark 3650 and a HP LJ4. The
three that do not show up are an HP LJ4200 (this is the one that I want to
work, it's closest to his desk), and HP LJ1200 and a Canon IR5000
copier/printer.

I've tried setting up the LJ 4200 locally on his pc with an IP port, but
this didn't work. Connecting via a parallel cable is not practical.

Anyone have any ideas?

Thanks,
John