|
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
|
|
|
Thread Tools | Display Modes |
|
#16
July 23rd 04, 12:59 AM
|
|||
|
|||
usb ports
I have taken due note of D Currie's observation and he is correct..
Windows ME does support USB, but your computer may not necessarily be fitted with USB ports.. so go and buy a USB card, install it into the machine, and be ready with the Win ME installation cd.. I am assuming that a USB 2.0 card will work as version 1.1 with ME drivers.. "teresa hodder" wrote in message ... i have a usb printer but in windows me there is no usb port to configure it to. 
|
| Ads |
|
#17
July 23rd 04, 01:08 AM
|
|||
|
|||
|
usb ports
I have taken due note of D Currie's observation and he is correct..
Windows ME does support USB, but your computer may not necessarily be fitted with USB ports.. so go and buy a USB card, install it into the machine, and be ready with the Win ME installation cd.. I am assuming that a USB 2.0 card will work as version 1.1 with ME drivers.. "teresa hodder" wrote in message ... i have a usb printer but in windows me there is no usb port to configure it to.
|
|
#18
July 23rd 04, 01:11 AM
|
|||
|
|||
|
usb ports
Have you tried to find anything other than a USB 2.0 card recently?
"Yves Leclerc" wrote in message ... SP1a is only required in order to activate USB 2.0 ports. USB 1.1 and 1.0 port drivers are already in XP. "Mike" wrote in message ... Load the software and drivers.. hook up the printer to the USB port.. if your computer does not have physical USB ports, buy a USB card and install it.. you will need to install SP1a if you haven't already.. "teresa hodder" wrote in message ... i have a usb printer but in windows me there is no usb port to configure it to.
|
|
#19
July 23rd 04, 01:30 AM
|
|||
|
|||
|
usb ports
SP1 is for XP; the OP has ME.
"Yves Leclerc" wrote in message ... SP1a is only required in order to activate USB 2.0 ports. USB 1.1 and 1.0 port drivers are already in XP. "Mike" wrote in message ... Load the software and drivers.. hook up the printer to the USB port.. if your computer does not have physical USB ports, buy a USB card and install it.. you will need to install SP1a if you haven't already.. "teresa hodder" wrote in message ... i have a usb printer but in windows me there is no usb port to configure it to.
|
|
#20
July 23rd 04, 01:50 AM
|
|||
|
|||
|
usb ports
I have taken due note of D Currie's observation and he is correct..
Windows ME does support USB, but your computer may not necessarily be fitted with USB ports.. so go and buy a USB card, install it into the machine, and be ready with the Win ME installation cd.. I am assuming that a USB 2.0 card will work as version 1.1 with ME drivers.. "teresa hodder" wrote in message ... i have a usb printer but in windows me there is no usb port to configure it to.
|
|
#21
July 23rd 04, 02:29 AM
|
|||
|
|||
|
usb ports
Have you tried to find anything other than a USB 2.0 card recently?
"Yves Leclerc" wrote in message ... SP1a is only required in order to activate USB 2.0 ports. USB 1.1 and 1.0 port drivers are already in XP. "Mike" wrote in message ... Load the software and drivers.. hook up the printer to the USB port.. if your computer does not have physical USB ports, buy a USB card and install it.. you will need to install SP1a if you haven't already.. "teresa hodder" wrote in message ... i have a usb printer but in windows me there is no usb port to configure it to.
|
|
#22
July 23rd 04, 02:41 AM
|
|||
|
|||
|
usb ports
Also, you shouldn't have to configure a USB device. It configures
itself. I also highly recommend buying an upgrade to Windows XP as it is going to be around for a while and Windows ME was released before it was even finished. Horrible OS and shame on MS for releasing it before it was ready  ---- Nathan McNulty Mike wrote: I have taken due note of D Currie's observation and he is correct.. Windows ME does support USB, but your computer may not necessarily be fitted with USB ports.. so go and buy a USB card, install it into the machine, and be ready with the Win ME installation cd.. I am assuming that a USB 2.0 card will work as version 1.1 with ME drivers.. "teresa hodder" wrote in message ... i have a usb printer but in windows me there is no usb port to configure it to.
|
|
#23
July 23rd 04, 02:50 AM
|
|||
|
|||
|
usb ports
SP1 is for XP; the OP has ME.
"Yves Leclerc" wrote in message ... SP1a is only required in order to activate USB 2.0 ports. USB 1.1 and 1.0 port drivers are already in XP. "Mike" wrote in message ... Load the software and drivers.. hook up the printer to the USB port.. if your computer does not have physical USB ports, buy a USB card and install it.. you will need to install SP1a if you haven't already.. "teresa hodder" wrote in message ... i have a usb printer but in windows me there is no usb port to configure it to.
|
|
#24
July 23rd 04, 03:14 AM
|
|||
|
|||
|
usb ports
Also, you shouldn't have to configure a USB device. It configures
itself. I also highly recommend buying an upgrade to Windows XP as it is going to be around for a while and Windows ME was released before it was even finished. Horrible OS and shame on MS for releasing it before it was ready ---- Nathan McNulty Mike wrote: I have taken due note of D Currie's observation and he is correct.. Windows ME does support USB, but your computer may not necessarily be fitted with USB ports.. so go and buy a USB card, install it into the machine, and be ready with the Win ME installation cd.. I am assuming that a USB 2.0 card will work as version 1.1 with ME drivers.. "teresa hodder" wrote in message ... i have a usb printer but in windows me there is no usb port to configure it to.
|
|
#25
July 23rd 04, 05:23 AM
|
|||
|
|||
|
usb ports
I have taken due note of D Currie's observation and he is correct..
Windows ME does support USB, but your computer may not necessarily be fitted with USB ports.. so go and buy a USB card, install it into the machine, and be ready with the Win ME installation cd.. I am assuming that a USB 2.0 card will work as version 1.1 with ME drivers.. "teresa hodder" wrote in message ... i have a usb printer but in windows me there is no usb port to configure it to.
|
|
#26
July 23rd 04, 05:34 AM
|
|||
|
|||
|
usb ports
Have you tried to find anything other than a USB 2.0 card recently?
"Yves Leclerc" wrote in message ... SP1a is only required in order to activate USB 2.0 ports. USB 1.1 and 1.0 port drivers are already in XP. "Mike" wrote in message ... Load the software and drivers.. hook up the printer to the USB port.. if your computer does not have physical USB ports, buy a USB card and install it.. you will need to install SP1a if you haven't already.. "teresa hodder" wrote in message ... i have a usb printer but in windows me there is no usb port to configure it to.
|
|
#27
July 24th 04, 06:30 PM
|
|||
|
|||
|
usb ports
Load the software and drivers.. hook up the printer to the USB port.. if
your computer does not have physical USB ports, buy a USB card and install it.. you will need to install SP1a if you haven't already.. "teresa hodder" wrote in message ... i have a usb printer but in windows me there is no usb port to configure it to.
|
|
#28
July 24th 04, 06:59 PM
|
|||
|
|||
|
usb ports
Load the software and drivers.. hook up the printer to the USB port.. if
your computer does not have physical USB ports, buy a USB card and install it.. you will need to install SP1a if you haven't already.. "teresa hodder" wrote in message ... i have a usb printer but in windows me there is no usb port to configure it to.
|
|
#29
July 24th 04, 07:08 PM
|
|||
|
|||
|
usb ports
Load the software and drivers.. hook up the printer to the USB port.. if
your computer does not have physical USB ports, buy a USB card and install it.. you will need to install SP1a if you haven't already.. "teresa hodder" wrote in message ... i have a usb printer but in windows me there is no usb port to configure it to.
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
