If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Divide by zero error on printer access 0xC0000094
Error description: PC with XP Home-Edition cannot print to
a configured printer. Error message (german GUI): 'Ausnahmecode 0xC0000094' I know that this is a 'divide by zero' error. It does not matter whether the printer is connected localy (parallel port) or is configured as a network printer if connected to another machine in the network. Details: Let PC1, PC2 and S1 be machines with XP Home-Edition installed. The printer OKI B4200 (PCL) is connected localy to server S1. Printing to the OKI B4200 from S1 and from PC2 (via network) is working without problems. However, PC1 cannot print to this printer. The printer is configured as network printer at PC1 the same way it is configured on PC2. Facts: - The printer on S1 is shared to all machines in the LAN - PC1 is able to access other network ressources like drives on S1 == basic network connection is ok - PC1 is able to print on network printers connected to S1 which are different from the OKI B4200 == general printing machinery on PC1 is OK PC1 has only problems with printing to this particular printer. - It does not help to delete the printer configuration on PC1 and configure them again. == I suppose that the printer drivers installed on PC1 are ok - Any access from PC1 to the printer OKI B4200 yields an error code 0xC0000094 E.g. the error message occurs if I click on the 'properties' tab of the printer. - Other PCs (e.g. PC2) can print without problems to this printer == the printer has no defect == the sharing on server S1 is correct (there is no client specific sharing) - If I connect the printer localy to PC1 I get the same error message!! I installed and deleted the drivers for several times. Sometimes I got 'divide by zero' error even dring the installation of the driver == This is not a network problem. Questions: 1) can I somehow raise the log-level in the event logs to get more output 2) can I trace the printer driver to find out what causes the 0xC0000094 error code 3) Is it possible that I corrupted some system files at PC1? If I connect some old printer (matrix printer) printing is no problem on PC1 Only printing to the sophisticated OKI B4200 yields an error code 0xC0000094 Perhaps some font database is corrupted that is only consulted when printing to the OKI B4200 and is not needed when printing to an old matrix printer. |
Ads |
#2
|
|||
|
|||
hi franz
did you find a solution to your XP printing error (0xc0000094)? i have the same problem thanx al cain |
Thread Tools | |
Display Modes | |
|
|