If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
printer not printing
I'm using WinXP and an HPLaserJet4100 on my desktop computer. Suddenly, my
printer won't print. It's on, it's connected, and until yesterday it was printing just fine. I don't know if it's coincidence, but yesterday we had major thunderstorms (with one lightning strike that went through the roof of a house across the alley), and I lost my landline. It was just restored this afternoon, along with my internet service (I have DSL). The repairman said the line between the alley and my house had to be replaced. The error message is "This document failed to print." It goes on to name the job, the printer, etc. I turned the printer and the computer off and then back on. I also tried printing from my laptop, which is networked to my desktop computer. It appears to send the order to the desktop computer, but it just lands in a queue and doesn't print. My husband checked all the physical connections, and they seem fine. Any idea of what I should do next? Thank you! Jo-Anne |
Ads |
#2
|
|||
|
|||
printer not printing
"Jo-Anne" wrote in message ... : I'm using WinXP and an HPLaserJet4100 on my desktop computer. Suddenly, my : printer won't print. It's on, it's connected, and until yesterday it was : printing just fine. : : I don't know if it's coincidence, but yesterday we had major thunderstorms : (with one lightning strike that went through the roof of a house across the : alley), and I lost my landline. It was just restored this afternoon, along : with my internet service (I have DSL). The repairman said the line between : the alley and my house had to be replaced. : : The error message is "This document failed to print." It goes on to name the : job, the printer, etc. : : I turned the printer and the computer off and then back on. I also tried : printing from my laptop, which is networked to my desktop computer. It : appears to send the order to the desktop computer, but it just lands in a : queue and doesn't print. : : My husband checked all the physical connections, and they seem fine. : : Any idea of what I should do next? : : Thank you! : : Jo-Anne : Contact HP support. : |
#3
|
|||
|
|||
printer not printing
Just for the heck of it.... why don't you try another install of the printer
and try to print a test page from the install. If it is USB, does the computer react when you plug/unplug the usb cable? "Jo-Anne" wrote in message ... I'm using WinXP and an HPLaserJet4100 on my desktop computer. Suddenly, my printer won't print. It's on, it's connected, and until yesterday it was printing just fine. I don't know if it's coincidence, but yesterday we had major thunderstorms (with one lightning strike that went through the roof of a house across the alley), and I lost my landline. It was just restored this afternoon, along with my internet service (I have DSL). The repairman said the line between the alley and my house had to be replaced. The error message is "This document failed to print." It goes on to name the job, the printer, etc. I turned the printer and the computer off and then back on. I also tried printing from my laptop, which is networked to my desktop computer. It appears to send the order to the desktop computer, but it just lands in a queue and doesn't print. My husband checked all the physical connections, and they seem fine. Any idea of what I should do next? Thank you! Jo-Anne |
#4
|
|||
|
|||
printer not printing
"Meebers" wrote in message g.com... Just for the heck of it.... why don't you try another install of the printer and try to print a test page from the install. If it is USB, does the computer react when you plug/unplug the usb cable? Also clear the que from the previous print job. "Jo-Anne" wrote in message ... I'm using WinXP and an HPLaserJet4100 on my desktop computer. Suddenly, my printer won't print. It's on, it's connected, and until yesterday it was printing just fine. I don't know if it's coincidence, but yesterday we had major thunderstorms (with one lightning strike that went through the roof of a house across the alley), and I lost my landline. It was just restored this afternoon, along with my internet service (I have DSL). The repairman said the line between the alley and my house had to be replaced. The error message is "This document failed to print." It goes on to name the job, the printer, etc. I turned the printer and the computer off and then back on. I also tried printing from my laptop, which is networked to my desktop computer. It appears to send the order to the desktop computer, but it just lands in a queue and doesn't print. My husband checked all the physical connections, and they seem fine. Any idea of what I should do next? Thank you! Jo-Anne |
#5
|
|||
|
|||
printer not printing
"Jo-Anne" wrote in message ... I'm using WinXP and an HPLaserJet4100 on my desktop computer. Suddenly, my printer won't print. It's on, it's connected, and until yesterday it was printing just fine. I don't know if it's coincidence, but yesterday we had major thunderstorms (with one lightning strike that went through the roof of a house across the alley), and I lost my landline. It was just restored this afternoon, along with my internet service (I have DSL). The repairman said the line between the alley and my house had to be replaced. The error message is "This document failed to print." It goes on to name the job, the printer, etc. I turned the printer and the computer off and then back on. I also tried printing from my laptop, which is networked to my desktop computer. It appears to send the order to the desktop computer, but it just lands in a queue and doesn't print. My husband checked all the physical connections, and they seem fine. Any idea of what I should do next? Thank you! Jo-Anne Look in the printer manual and see if it will run a self test. Hook the computer directly to the laptop and install the drivers in that computer and see if it will print. If not then the printer is fried. As this printer was put into original service some time near the beginning of the decade it probably has no value for an insurance claim. If it proves to be dead it probably isn't worth have repairs made either. I had a strike near my house one time, no power or telephone lines were struck and power to house wasn't lost. Everything that was damaged was turned off at the time of the strike. I lost the internal modems in two computers, one TV and an Epson wide carriage ink jet printer. What was unusual is that the printer self-tested fine but the Parallel interface circuitry was cooked. Other than that everything else worked fine. Lightening can do weird things to electrical components even when they are turned off and don't get struck directly. |
#6
|
|||
|
|||
printer not printing
"LVTravel" wrote in message
... "Jo-Anne" wrote in message ... I'm using WinXP and an HPLaserJet4100 on my desktop computer. Suddenly, my printer won't print. It's on, it's connected, and until yesterday it was printing just fine. I don't know if it's coincidence, but yesterday we had major thunderstorms (with one lightning strike that went through the roof of a house across the alley), and I lost my landline. It was just restored this afternoon, along with my internet service (I have DSL). The repairman said the line between the alley and my house had to be replaced. The error message is "This document failed to print." It goes on to name the job, the printer, etc. I turned the printer and the computer off and then back on. I also tried printing from my laptop, which is networked to my desktop computer. It appears to send the order to the desktop computer, but it just lands in a queue and doesn't print. My husband checked all the physical connections, and they seem fine. Any idea of what I should do next? Thank you! Jo-Anne Look in the printer manual and see if it will run a self test. Hook the computer directly to the laptop and install the drivers in that computer and see if it will print. If not then the printer is fried. As this printer was put into original service some time near the beginning of the decade it probably has no value for an insurance claim. If it proves to be dead it probably isn't worth have repairs made either. I had a strike near my house one time, no power or telephone lines were struck and power to house wasn't lost. Everything that was damaged was turned off at the time of the strike. I lost the internal modems in two computers, one TV and an Epson wide carriage ink jet printer. What was unusual is that the printer self-tested fine but the Parallel interface circuitry was cooked. Other than that everything else worked fine. Lightening can do weird things to electrical components even when they are turned off and don't get struck directly. Thank you very much, LVTravel! I did a self-test, and it was fine, so the printer is functional. I'm not sure, however, how to connect it to my laptop. It's a parallel printer, and the laptop has only serial and USB ports. Is there a cable I can buy to do this? If not, I'll need to take the printer to a shop or maybe to a friend who has an old desktop computer like mine. I forgot to mention earlier that my husband's electronic weather station was fried the same night that we lost the landline and, quite possibly, my printer. No direct strike... Thank you again! Jo-Anne |
#7
|
|||
|
|||
printer not printing
"Do Dah Zippity" wrote in message
... "Jo-Anne" wrote in message ... : I'm using WinXP and an HPLaserJet4100 on my desktop computer. Suddenly, my : printer won't print. It's on, it's connected, and until yesterday it was : printing just fine. : : I don't know if it's coincidence, but yesterday we had major thunderstorms : (with one lightning strike that went through the roof of a house across the : alley), and I lost my landline. It was just restored this afternoon, along : with my internet service (I have DSL). The repairman said the line between : the alley and my house had to be replaced. : : The error message is "This document failed to print." It goes on to name the : job, the printer, etc. : : I turned the printer and the computer off and then back on. I also tried : printing from my laptop, which is networked to my desktop computer. It : appears to send the order to the desktop computer, but it just lands in a : queue and doesn't print. : : My husband checked all the physical connections, and they seem fine. : : Any idea of what I should do next? : : Thank you! : : Jo-Anne : Contact HP support. : For a 9-year-old printer? |
#8
|
|||
|
|||
printer not printing
Thank you, Meebers! The printer does print--from itself. It's a parallel
printer, and we've unplugged it and replugged it. I haven't tried reinstalling the drivers. I was going to install the printer on another computer to see if it would work, but so far I haven't been able to connect it to my laptop, which doesn't have a parallel port. I did clear the queue from the previous print jobs... Jo-Anne "Meebers" wrote in message g.com... Just for the heck of it.... why don't you try another install of the printer and try to print a test page from the install. If it is USB, does the computer react when you plug/unplug the usb cable? "Jo-Anne" wrote in message ... I'm using WinXP and an HPLaserJet4100 on my desktop computer. Suddenly, my printer won't print. It's on, it's connected, and until yesterday it was printing just fine. I don't know if it's coincidence, but yesterday we had major thunderstorms (with one lightning strike that went through the roof of a house across the alley), and I lost my landline. It was just restored this afternoon, along with my internet service (I have DSL). The repairman said the line between the alley and my house had to be replaced. The error message is "This document failed to print." It goes on to name the job, the printer, etc. I turned the printer and the computer off and then back on. I also tried printing from my laptop, which is networked to my desktop computer. It appears to send the order to the desktop computer, but it just lands in a queue and doesn't print. My husband checked all the physical connections, and they seem fine. Any idea of what I should do next? Thank you! Jo-Anne |
#9
|
|||
|
|||
printer not printing
Jo-Anne wrote:
"LVTravel" wrote in message ... "Jo-Anne" wrote in message ... I'm using WinXP and an HPLaserJet4100 on my desktop computer. Suddenly, my printer won't print. It's on, it's connected, and until yesterday it was printing just fine. I don't know if it's coincidence, but yesterday we had major thunderstorms (with one lightning strike that went through the roof of a house across the alley), and I lost my landline. It was just restored this afternoon, along with my internet service (I have DSL). The repairman said the line between the alley and my house had to be replaced. The error message is "This document failed to print." It goes on to name the job, the printer, etc. I turned the printer and the computer off and then back on. I also tried printing from my laptop, which is networked to my desktop computer. It appears to send the order to the desktop computer, but it just lands in a queue and doesn't print. My husband checked all the physical connections, and they seem fine. Any idea of what I should do next? Thank you! Jo-Anne Look in the printer manual and see if it will run a self test. Hook the computer directly to the laptop and install the drivers in that computer and see if it will print. If not then the printer is fried. As this printer was put into original service some time near the beginning of the decade it probably has no value for an insurance claim. If it proves to be dead it probably isn't worth have repairs made either. I had a strike near my house one time, no power or telephone lines were struck and power to house wasn't lost. Everything that was damaged was turned off at the time of the strike. I lost the internal modems in two computers, one TV and an Epson wide carriage ink jet printer. What was unusual is that the printer self-tested fine but the Parallel interface circuitry was cooked. Other than that everything else worked fine. Lightening can do weird things to electrical components even when they are turned off and don't get struck directly. Thank you very much, LVTravel! I did a self-test, and it was fine, so the printer is functional. I'm not sure, however, how to connect it to my laptop. It's a parallel printer, and the laptop has only serial and USB ports. Is there a cable I can buy to do this? If not, I'll need to take the printer to a shop or maybe to a friend who has an old desktop computer like mine. I forgot to mention earlier that my husband's electronic weather station was fried the same night that we lost the landline and, quite possibly, my printer. No direct strike... Thank you again! Jo-Anne Jo-Anne: USb to Parallel converters DO exist: http://www.cablestogo.com/product_list.asp?cat_id=1537 http://www.tigerdirect.com/applicati...el%20A dapter http://www.amazon.com/Sabrent-SBT-UP.../dp/B0007UVRVO http://www.amazon.com/gp/offer-listi...&condition=new whether they are worth the price just to test is up to you. A friend or neighbor with a Parallel port machine is more cost effective IMHO. John -- \\\||/// ------------------o000----(o)(o)----000o---------------- ----------------------------()-------------------------- '' Madness takes its toll - Please have exact change. '' John Dulak - 40.4913ºN,79.904ºW - http://tinyurl.com/2qs6o6 |
#10
|
|||
|
|||
printer not printing
"John Dulak" wrote in message
... Jo-Anne wrote: "LVTravel" wrote in message ... "Jo-Anne" wrote in message ... I'm using WinXP and an HPLaserJet4100 on my desktop computer. Suddenly, my printer won't print. It's on, it's connected, and until yesterday it was printing just fine. I don't know if it's coincidence, but yesterday we had major thunderstorms (with one lightning strike that went through the roof of a house across the alley), and I lost my landline. It was just restored this afternoon, along with my internet service (I have DSL). The repairman said the line between the alley and my house had to be replaced. The error message is "This document failed to print." It goes on to name the job, the printer, etc. I turned the printer and the computer off and then back on. I also tried printing from my laptop, which is networked to my desktop computer. It appears to send the order to the desktop computer, but it just lands in a queue and doesn't print. My husband checked all the physical connections, and they seem fine. Any idea of what I should do next? Thank you! Jo-Anne Look in the printer manual and see if it will run a self test. Hook the computer directly to the laptop and install the drivers in that computer and see if it will print. If not then the printer is fried. As this printer was put into original service some time near the beginning of the decade it probably has no value for an insurance claim. If it proves to be dead it probably isn't worth have repairs made either. I had a strike near my house one time, no power or telephone lines were struck and power to house wasn't lost. Everything that was damaged was turned off at the time of the strike. I lost the internal modems in two computers, one TV and an Epson wide carriage ink jet printer. What was unusual is that the printer self-tested fine but the Parallel interface circuitry was cooked. Other than that everything else worked fine. Lightening can do weird things to electrical components even when they are turned off and don't get struck directly. Thank you very much, LVTravel! I did a self-test, and it was fine, so the printer is functional. I'm not sure, however, how to connect it to my laptop. It's a parallel printer, and the laptop has only serial and USB ports. Is there a cable I can buy to do this? If not, I'll need to take the printer to a shop or maybe to a friend who has an old desktop computer like mine. I forgot to mention earlier that my husband's electronic weather station was fried the same night that we lost the landline and, quite possibly, my printer. No direct strike... Thank you again! Jo-Anne Jo-Anne: USb to Parallel converters DO exist: http://www.cablestogo.com/product_list.asp?cat_id=1537 http://www.tigerdirect.com/applicati...el%20A dapter http://www.amazon.com/Sabrent-SBT-UP.../dp/B0007UVRVO http://www.amazon.com/gp/offer-listi...&condition=new whether they are worth the price just to test is up to you. A friend or neighbor with a Parallel port machine is more cost effective IMHO. John Thank you, John! They are expensive, certainly. But I have no one nearby with a parallel port machine--and if I have to take it to a local shop, it'll be even more expensive. Jo-Anne |
#11
|
|||
|
|||
printer not printing
"Jo-Anne" wrote in message ... "John Dulak" wrote in message ... Jo-Anne wrote: "LVTravel" wrote in message ... "Jo-Anne" wrote in message ... I'm using WinXP and an HPLaserJet4100 on my desktop computer. Suddenly, my printer won't print. It's on, it's connected, and until yesterday it was printing just fine. I don't know if it's coincidence, but yesterday we had major thunderstorms (with one lightning strike that went through the roof of a house across the alley), and I lost my landline. It was just restored this afternoon, along with my internet service (I have DSL). The repairman said the line between the alley and my house had to be replaced. The error message is "This document failed to print." It goes on to name the job, the printer, etc. I turned the printer and the computer off and then back on. I also tried printing from my laptop, which is networked to my desktop computer. It appears to send the order to the desktop computer, but it just lands in a queue and doesn't print. My husband checked all the physical connections, and they seem fine. Any idea of what I should do next? Thank you! Jo-Anne Look in the printer manual and see if it will run a self test. Hook the computer directly to the laptop and install the drivers in that computer and see if it will print. If not then the printer is fried. As this printer was put into original service some time near the beginning of the decade it probably has no value for an insurance claim. If it proves to be dead it probably isn't worth have repairs made either. I had a strike near my house one time, no power or telephone lines were struck and power to house wasn't lost. Everything that was damaged was turned off at the time of the strike. I lost the internal modems in two computers, one TV and an Epson wide carriage ink jet printer. What was unusual is that the printer self-tested fine but the Parallel interface circuitry was cooked. Other than that everything else worked fine. Lightening can do weird things to electrical components even when they are turned off and don't get struck directly. Thank you very much, LVTravel! I did a self-test, and it was fine, so the printer is functional. I'm not sure, however, how to connect it to my laptop. It's a parallel printer, and the laptop has only serial and USB ports. Is there a cable I can buy to do this? If not, I'll need to take the printer to a shop or maybe to a friend who has an old desktop computer like mine. I forgot to mention earlier that my husband's electronic weather station was fried the same night that we lost the landline and, quite possibly, my printer. No direct strike... Thank you again! Jo-Anne Jo-Anne: USb to Parallel converters DO exist: http://www.cablestogo.com/product_list.asp?cat_id=1537 http://www.tigerdirect.com/applicati...el%20A dapter http://www.amazon.com/Sabrent-SBT-UP.../dp/B0007UVRVO http://www.amazon.com/gp/offer-listi...&condition=new whether they are worth the price just to test is up to you. A friend or neighbor with a Parallel port machine is more cost effective IMHO. John Thank you, John! They are expensive, certainly. But I have no one nearby with a parallel port machine--and if I have to take it to a local shop, it'll be even more expensive. Jo-Anne I know I'm butting in late here but if it's so old a printer it uses the old parallel port then it likely would print directly from the command line, e.g. open a command prompt, type 'copy con lpt1', type some text and hit enter, then (from memory) it's Ctrl-Z to exit out of the copy command. The printer should react in some manner or my guess is it's some hardware connection problem (as it self tests) and if that isn't a cable (possibly some mode in printer's own onboard setup?) issue I'd be looking for a new USB whatever I could afford. |
#12
|
|||
|
|||
printer not printing
"pjp" wrote in message
news:Hsq6o.10637$z%6.6465@edtnps83... "Jo-Anne" wrote in message ... "John Dulak" wrote in message ... Jo-Anne wrote: "LVTravel" wrote in message ... "Jo-Anne" wrote in message ... I'm using WinXP and an HPLaserJet4100 on my desktop computer. Suddenly, my printer won't print. It's on, it's connected, and until yesterday it was printing just fine. I don't know if it's coincidence, but yesterday we had major thunderstorms (with one lightning strike that went through the roof of a house across the alley), and I lost my landline. It was just restored this afternoon, along with my internet service (I have DSL). The repairman said the line between the alley and my house had to be replaced. The error message is "This document failed to print." It goes on to name the job, the printer, etc. I turned the printer and the computer off and then back on. I also tried printing from my laptop, which is networked to my desktop computer. It appears to send the order to the desktop computer, but it just lands in a queue and doesn't print. My husband checked all the physical connections, and they seem fine. Any idea of what I should do next? Thank you! Jo-Anne Look in the printer manual and see if it will run a self test. Hook the computer directly to the laptop and install the drivers in that computer and see if it will print. If not then the printer is fried. As this printer was put into original service some time near the beginning of the decade it probably has no value for an insurance claim. If it proves to be dead it probably isn't worth have repairs made either. I had a strike near my house one time, no power or telephone lines were struck and power to house wasn't lost. Everything that was damaged was turned off at the time of the strike. I lost the internal modems in two computers, one TV and an Epson wide carriage ink jet printer. What was unusual is that the printer self-tested fine but the Parallel interface circuitry was cooked. Other than that everything else worked fine. Lightening can do weird things to electrical components even when they are turned off and don't get struck directly. Thank you very much, LVTravel! I did a self-test, and it was fine, so the printer is functional. I'm not sure, however, how to connect it to my laptop. It's a parallel printer, and the laptop has only serial and USB ports. Is there a cable I can buy to do this? If not, I'll need to take the printer to a shop or maybe to a friend who has an old desktop computer like mine. I forgot to mention earlier that my husband's electronic weather station was fried the same night that we lost the landline and, quite possibly, my printer. No direct strike... Thank you again! Jo-Anne Jo-Anne: USb to Parallel converters DO exist: http://www.cablestogo.com/product_list.asp?cat_id=1537 http://www.tigerdirect.com/applicati...el%20A dapter http://www.amazon.com/Sabrent-SBT-UP.../dp/B0007UVRVO http://www.amazon.com/gp/offer-listi...&condition=new whether they are worth the price just to test is up to you. A friend or neighbor with a Parallel port machine is more cost effective IMHO. John Thank you, John! They are expensive, certainly. But I have no one nearby with a parallel port machine--and if I have to take it to a local shop, it'll be even more expensive. Jo-Anne I know I'm butting in late here but if it's so old a printer it uses the old parallel port then it likely would print directly from the command line, e.g. open a command prompt, type 'copy con lpt1', type some text and hit enter, then (from memory) it's Ctrl-Z to exit out of the copy command. The printer should react in some manner or my guess is it's some hardware connection problem (as it self tests) and if that isn't a cable (possibly some mode in printer's own onboard setup?) issue I'd be looking for a new USB whatever I could afford. Thank you, pjp! I tried that and got "The syntax of the command is incorrect." What did I do wrong? Jo-Anne |
#13
|
|||
|
|||
printer not printing
I assume you can open a command prompt window. Mine by default is a black
windows with a blinking cursor after the following text C:\Documents and Settings\'my username' Note 'my username' is edited and is really what my login name is so yours would be different. At the blinking cursor type the following line copy con lpt1 and hit enter. If there's an error it's likely the system doesn't even see an lpt1 port so you could try lpt2 and lpt3 just to be sure buts it's unlikely. An error indicates a hardware problem and again cheaper just buy a cheap usb inkjet. Assuming no error the cursor goes down to beginning of next line, type almost an gibberish you feel like and hit enter, do a second line or more if inclined then use Ctrl-Z (hold down ctrl key and press z) to exit the "copy" command. You should get a message "1 file(s) copied." even if there's no printer hooked up which is my test scenario here. If the printer does act up in any manner would indicate some type of communications exists, hopefully it would actually print what you typed in which case hardware is basically working so it's something in software in Windows acting up. For educational purposes. The OS has some reserved names it uses to indicate hardware devices, con (for console), lpt'x' (old style printer port 'x') and com 'x' (for serial ports). The above is simply copying what you type at the keyboard to the lpt port, you could instead choose to copy a file, preferably some small text file in which case you use the following command copy 'filename' lpt1 and the system should respond '1 file(s) copied.' same as if you had copied it to another folder or drive and hopefully the printer would spit it out. "Jo-Anne" wrote in message ... "pjp" wrote in message news:Hsq6o.10637$z%6.6465@edtnps83... "Jo-Anne" wrote in message ... "John Dulak" wrote in message ... Jo-Anne wrote: "LVTravel" wrote in message ... "Jo-Anne" wrote in message ... I'm using WinXP and an HPLaserJet4100 on my desktop computer. Suddenly, my printer won't print. It's on, it's connected, and until yesterday it was printing just fine. I don't know if it's coincidence, but yesterday we had major thunderstorms (with one lightning strike that went through the roof of a house across the alley), and I lost my landline. It was just restored this afternoon, along with my internet service (I have DSL). The repairman said the line between the alley and my house had to be replaced. The error message is "This document failed to print." It goes on to name the job, the printer, etc. I turned the printer and the computer off and then back on. I also tried printing from my laptop, which is networked to my desktop computer. It appears to send the order to the desktop computer, but it just lands in a queue and doesn't print. My husband checked all the physical connections, and they seem fine. Any idea of what I should do next? Thank you! Jo-Anne Look in the printer manual and see if it will run a self test. Hook the computer directly to the laptop and install the drivers in that computer and see if it will print. If not then the printer is fried. As this printer was put into original service some time near the beginning of the decade it probably has no value for an insurance claim. If it proves to be dead it probably isn't worth have repairs made either. I had a strike near my house one time, no power or telephone lines were struck and power to house wasn't lost. Everything that was damaged was turned off at the time of the strike. I lost the internal modems in two computers, one TV and an Epson wide carriage ink jet printer. What was unusual is that the printer self-tested fine but the Parallel interface circuitry was cooked. Other than that everything else worked fine. Lightening can do weird things to electrical components even when they are turned off and don't get struck directly. Thank you very much, LVTravel! I did a self-test, and it was fine, so the printer is functional. I'm not sure, however, how to connect it to my laptop. It's a parallel printer, and the laptop has only serial and USB ports. Is there a cable I can buy to do this? If not, I'll need to take the printer to a shop or maybe to a friend who has an old desktop computer like mine. I forgot to mention earlier that my husband's electronic weather station was fried the same night that we lost the landline and, quite possibly, my printer. No direct strike... Thank you again! Jo-Anne Jo-Anne: USb to Parallel converters DO exist: http://www.cablestogo.com/product_list.asp?cat_id=1537 http://www.tigerdirect.com/applicati...el%20A dapter http://www.amazon.com/Sabrent-SBT-UP.../dp/B0007UVRVO http://www.amazon.com/gp/offer-listi...&condition=new whether they are worth the price just to test is up to you. A friend or neighbor with a Parallel port machine is more cost effective IMHO. John Thank you, John! They are expensive, certainly. But I have no one nearby with a parallel port machine--and if I have to take it to a local shop, it'll be even more expensive. Jo-Anne I know I'm butting in late here but if it's so old a printer it uses the old parallel port then it likely would print directly from the command line, e.g. open a command prompt, type 'copy con lpt1', type some text and hit enter, then (from memory) it's Ctrl-Z to exit out of the copy command. The printer should react in some manner or my guess is it's some hardware connection problem (as it self tests) and if that isn't a cable (possibly some mode in printer's own onboard setup?) issue I'd be looking for a new USB whatever I could afford. Thank you, pjp! I tried that and got "The syntax of the command is incorrect." What did I do wrong? Jo-Anne |
#14
|
|||
|
|||
printer not printing
"Jo-Anne" wrote in message ... I'm using WinXP and an HPLaserJet4100 on my desktop computer. Suddenly, my printer won't print. It's on, it's connected, and until yesterday it was printing just fine. I don't know if it's coincidence, but yesterday we had major thunderstorms (with one lightning strike that went through the roof of a house across the alley), and I lost my landline. It was just restored this afternoon, along with my internet service (I have DSL). The repairman said the line between the alley and my house had to be replaced. The error message is "This document failed to print." It goes on to name the job, the printer, etc. I turned the printer and the computer off and then back on. I also tried printing from my laptop, which is networked to my desktop computer. It appears to send the order to the desktop computer, but it just lands in a queue and doesn't print. My husband checked all the physical connections, and they seem fine. Any idea of what I should do next? Thank you! Jo-Anne Does the printer show up in Printers and Faxes? If so, right-click on it, pick Properties, then click on Print Test Page. Do you get an error message, or does it try to print? Is there a document showing in queue after clicking on Test Page, and does it eventually go away (with or without printing), or do you have to manually clear the queue? Also, is your Print Spooler service running? -- SC Tom |
#15
|
|||
|
|||
printer not printing
"SC Tom" wrote in message
... "Jo-Anne" wrote in message ... I'm using WinXP and an HPLaserJet4100 on my desktop computer. Suddenly, my printer won't print. It's on, it's connected, and until yesterday it was printing just fine. I don't know if it's coincidence, but yesterday we had major thunderstorms (with one lightning strike that went through the roof of a house across the alley), and I lost my landline. It was just restored this afternoon, along with my internet service (I have DSL). The repairman said the line between the alley and my house had to be replaced. The error message is "This document failed to print." It goes on to name the job, the printer, etc. I turned the printer and the computer off and then back on. I also tried printing from my laptop, which is networked to my desktop computer. It appears to send the order to the desktop computer, but it just lands in a queue and doesn't print. My husband checked all the physical connections, and they seem fine. Any idea of what I should do next? Thank you! Jo-Anne Does the printer show up in Printers and Faxes? If so, right-click on it, pick Properties, then click on Print Test Page. Do you get an error message, or does it try to print? Is there a document showing in queue after clicking on Test Page, and does it eventually go away (with or without printing), or do you have to manually clear the queue? Also, is your Print Spooler service running? -- SC Tom Hi, SC Tom, Here are the answers: I clicked on Print Test Page and didn't get an error message. The document showed up in the queue but didn't go away until I manually cleared it. (That's the way it's been happening since the problem started; I've had to manually clear it each time--and, for what it's worth, the status is always "offline" when I look at it.) As far as I can tell in Properties, the Print Spooler is running--or at least is set to do so. Per pjp, I used the right syntax today to print from the command line, but the same thing happened--the document ended up in the queue and stayed there. Last night, my husband dug out a new parallel printer cable and plugged it into the computer and the printer. No change. I did some troubleshooting through HP Help, and at this point it suggests using another printer port if there is one (I don't think there's another parallel port on this computer) or uninstalling the port and letting Windows reinstall it. Is that worth trying? The only other thing I've been able to think to do (per LVTravel above) is to connect my laptop (not the desktop computer currently connected) directly to the printer. For that, however, I'd have to buy a parallel/USB cable (almost $40 locally). Of course, if I do that, I can probably connect the printer to a USB port on the desktop computer to see if the parallel port is the problem. Any further advice would be very much appreciated. Thank you again! Jo-Anne |
Thread Tools | |
Display Modes | |
|
|