If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#46
|
|||
|
|||
WIA and hibernation again
Can you verify the default time is still 0x00093a80 in the registry. If it
is trying to sync your clock too often then perhaps that would prevent hibernation. Savings time changeover would not be affected. "William B. Lurie" wrote in message ... Unknown wrote: Curiosity question. Did you at any time alter the time interval for when you sync your clock? Check your registry at: HKEY_LOCAL_MACHINE\System\currentcontrolset\servic es\w32Time\TimeProviders\NTPclient in right pane special poll interval is a hexidecimal count in seconds. For one week (XP default time) it is 0x00093a80 (604800) "William B. Lurie" wrote in message No, I've never been there. It of course did the Savings Time changeover with no hitch at all. This problem goes back way beyond 10 days ago....... |
Ads |
#47
|
|||
|
|||
WIA and hibernation again
Unknown wrote:
Can you verify the default time is still 0x00093a80 in the registry. If it is trying to sync your clock too often then perhaps that would prevent hibernation. Savings time changeover would not be affected. "William B. Lurie" wrote in message ... Unknown wrote: Curiosity question. Did you at any time alter the time interval for when you sync your clock? Check your registry at: HKEY_LOCAL_MACHINE\System\currentcontrolset\servic es\w32Time\TimeProviders\NTPclient in right pane special poll interval is a hexidecimal count in seconds. For one week (XP default time) it is 0x00093a80 (604800) "William B. Lurie" wrote in message No, I've never been there. It of course did the Savings Time changeover with no hitch at all. This problem goes back way beyond 10 days ago....... Just to check back with you, UNk, I checked and my setting is indeed as you showed, for SpecialPollInterval. Back to the drawing board......... |
#48
|
|||
|
|||
WIA and hibernation again
Thanks. Without sitting at your machine and observing various items I can
only go through the process of elimination. It seems something is calling for the internet about every hour. May I ask what you mean when you say Norton fixes their Boo-boos by remote control? "William B. Lurie" wrote in message ... Unknown wrote: Can you verify the default time is still 0x00093a80 in the registry. If it is trying to sync your clock too often then perhaps that would prevent hibernation. Savings time changeover would not be affected. "William B. Lurie" wrote in message ... Unknown wrote: Curiosity question. Did you at any time alter the time interval for when you sync your clock? Check your registry at: HKEY_LOCAL_MACHINE\System\currentcontrolset\servic es\w32Time\TimeProviders\NTPclient in right pane special poll interval is a hexidecimal count in seconds. For one week (XP default time) it is 0x00093a80 (604800) "William B. Lurie" wrote in message No, I've never been there. It of course did the Savings Time changeover with no hitch at all. This problem goes back way beyond 10 days ago....... Just to check back with you, UNk, I checked and my setting is indeed as you showed, for SpecialPollInterval. Back to the drawing board......... |
#49
|
|||
|
|||
WIA and hibernation again
William B. Lurie wrote:
Event Type: Error Event Source: DCOM Event Category: None Event ID: 10005 Date: 4/1/2010 Time: 6:40:36 AM User: COMPAQ-2006\Compaq_Owner Computer: COMPAQ-2006 Description: DCOM got error "The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. " attempting to start the service MDM with arguments "" in order to run the server: {0C0A3666-30C9-11D0-8F20-00805F2CD064} For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Event Type: Error Event Source: DCOM Event Category: None Event ID: 10005 Date: 4/1/2010 Time: 6:35:10 AM User: COMPAQ-2006\Compaq_Owner Computer: COMPAQ-2006 Description: DCOM got error "The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. " attempting to start the service MDM with arguments "" in order to run the server: {0C0A3666-30C9-11D0-8F20-00805F2CD064} For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Event Type: Error Event Source: Ntfs Event Category: Disk Event ID: 55 Date: 4/1/2010 Time: 6:42:47 AM User: N/A Computer: COMPAQ-2006 Description: The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume R:. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 0d 00 00 00 02 00 4e 00 ......N. 0008: 02 00 00 00 37 00 04 c0 ....7..À 0010: 00 00 00 00 32 00 00 c0 ....2..À 0018: 00 00 00 00 00 00 00 00 ........ 0020: 00 00 00 00 00 00 00 00 ........ Event Type: Error Event Source: Service Control Manager Event Category: None Event ID: 7026 Date: 4/1/2010 Time: 6:44:25 AM User: N/A Computer: COMPAQ-2006 Description: The following boot-start or system-start driver(s) failed to load: ftsata2 KLIF Is that an updated and current list of started Windows services? Yes, John, I generate it anew every time I make one of these hibernation runs, so that you can see it right with the Events. You discussed about those two drivers with another poster not too long ago. Yes, and now I'll answer your queries: ftsata2: Do you now, or did you at any time have a Promise controller installed? No, I do not now, and never did. This basic HP machine came with one hard drive, and cabling and slots for two more, which I added. I select which drive to run by interrupting boot process and telling it. KLIF: Do you now or did you at any time have Kaspersky AV software installed on the machine? No, I have used Norton AV steadily for at least 15 years. From the days when Norton was impossible to work with, to the present, where they fix boo-boos by Chat and remote control of their software. The chkdsk message... What do you have stored on volume R? Oh, I missed that it was referring to volume R. I have numerous 'restore points' of which that volume is one. I generate these every month or so, using the Save & Restore feature of Norton System Works, which used to be PowerQuest Partition Magic. I keep these in case I have to recreate a system as it was as of an earlier date). I'll chkdsk it routinely but I think we can ignore that Event. These system-start driver errors shouldn't affect the ability to hibernate but you can change their startup type and get rid of the errors if you want. You will have to change them in the registry at their respective subkeys in the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es key , set their Start Value to 0x3 or 0x4. 0x3 is manual start, 0x4 is disabled. Or, we can change them at the command prompt if you wish, I need the results of the following command before I can give you the proper commands to change the start type: sc query state= all c:\sc.txt Copy and paste the contents of the generated sc.txt file to your next post, there will be lots of verbiage in the file, post it all. John |
#50
|
|||
|
|||
WIA and hibernation again
Unknown wrote:
Thanks. Without sitting at your machine and observing various items I can only go through the process of elimination. It seems something is calling for the internet about every hour. May I ask what you mean when you say Norton fixes their Boo-boos by remote control? Sure. I go to their website and find tech support, for which one option is one-on-one online chat with their 'analyst'. I describe the problem, he (she) asks for permission to connect to my machine remotely, I give it, then he takes control of my cursor as tho' he was sitting in my chair, clicks and clacks, even downloads new upgrades software, installs, he and I check that he has fixed the problem, and I terminate the 'chat' session. The wait isn't usually long, typically 5 to 15 minutes. It's calling for *something* after one hour, which is why it doesn't reach the 2-hour hibernate, but as for calling the Internet, I don't know if we've proven that........ "William B. Lurie" wrote in message ... Unknown wrote: Can you verify the default time is still 0x00093a80 in the registry. If it is trying to sync your clock too often then perhaps that would prevent hibernation. Savings time changeover would not be affected. "William B. Lurie" wrote in message ... Unknown wrote: Curiosity question. Did you at any time alter the time interval for when you sync your clock? Check your registry at: HKEY_LOCAL_MACHINE\System\currentcontrolset\servic es\w32Time\TimeProviders\NTPclient in right pane special poll interval is a hexidecimal count in seconds. For one week (XP default time) it is 0x00093a80 (604800) "William B. Lurie" wrote in message No, I've never been there. It of course did the Savings Time changeover with no hitch at all. This problem goes back way beyond 10 days ago....... Just to check back with you, UNk, I checked and my setting is indeed as you showed, for SpecialPollInterval. Back to the drawing board......... |
#51
|
|||
|
|||
WIA and hibernation again
John John - MVP wrote:
William B. Lurie wrote: Event Type: Error Event Source: DCOM Event Category: None Event ID: 10005 Date: 4/1/2010 Time: 6:40:36 AM User: COMPAQ-2006\Compaq_Owner Computer: COMPAQ-2006 Description: DCOM got error "The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. " attempting to start the service MDM with arguments "" in order to run the server: {0C0A3666-30C9-11D0-8F20-00805F2CD064} For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Event Type: Error Event Source: DCOM Event Category: None Event ID: 10005 Date: 4/1/2010 Time: 6:35:10 AM User: COMPAQ-2006\Compaq_Owner Computer: COMPAQ-2006 Description: DCOM got error "The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. " attempting to start the service MDM with arguments "" in order to run the server: {0C0A3666-30C9-11D0-8F20-00805F2CD064} For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Event Type: Error Event Source: Ntfs Event Category: Disk Event ID: 55 Date: 4/1/2010 Time: 6:42:47 AM User: N/A Computer: COMPAQ-2006 Description: The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume R:. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 0d 00 00 00 02 00 4e 00 ......N. 0008: 02 00 00 00 37 00 04 c0 ....7..À 0010: 00 00 00 00 32 00 00 c0 ....2..À 0018: 00 00 00 00 00 00 00 00 ........ 0020: 00 00 00 00 00 00 00 00 ........ Event Type: Error Event Source: Service Control Manager Event Category: None Event ID: 7026 Date: 4/1/2010 Time: 6:44:25 AM User: N/A Computer: COMPAQ-2006 Description: The following boot-start or system-start driver(s) failed to load: ftsata2 KLIF Is that an updated and current list of started Windows services? Yes, John, I generate it anew every time I make one of these hibernation runs, so that you can see it right with the Events. You discussed about those two drivers with another poster not too long ago. Yes, and now I'll answer your queries: ftsata2: Do you now, or did you at any time have a Promise controller installed? No, I do not now, and never did. This basic HP machine came with one hard drive, and cabling and slots for two more, which I added. I select which drive to run by interrupting boot process and telling it. KLIF: Do you now or did you at any time have Kaspersky AV software installed on the machine? No, I have used Norton AV steadily for at least 15 years. From the days when Norton was impossible to work with, to the present, where they fix boo-boos by Chat and remote control of their software. The chkdsk message... What do you have stored on volume R? Oh, I missed that it was referring to volume R. I have numerous 'restore points' of which that volume is one. I generate these every month or so, using the Save & Restore feature of Norton System Works, which used to be PowerQuest Partition Magic. I keep these in case I have to recreate a system as it was as of an earlier date). I'll chkdsk it routinely but I think we can ignore that Event. These system-start driver errors shouldn't affect the ability to hibernate but you can change their startup type and get rid of the errors if you want. You will have to change them in the registry at their respective subkeys in the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es key , set their Start Value to 0x3 or 0x4. 0x3 is manual start, 0x4 is disabled. Or, we can change them at the command prompt if you wish, I need the results of the following command before I can give you the proper commands to change the start type: sc query state= all c:\sc.txt Copy and paste the contents of the generated sc.txt file to your next post, there will be lots of verbiage in the file, post it all. John Okay, John. I'll do it now on my Master system, saves some time in rebooting, doing sc on clone, rebooting to Master. Here it is: SERVICE_NAME: Alerter DISPLAY_NAME: Alerter TYPE : 20 WIN32_SHARE_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: ALG DISPLAY_NAME: Application Layer Gateway Service TYPE : 10 WIN32_OWN_PROCESS STATE : 4 RUNNING (STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: AppMgmt DISPLAY_NAME: Application Management TYPE : 20 WIN32_SHARE_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: aspnet_state DISPLAY_NAME: ASP.NET State Service TYPE : 10 WIN32_OWN_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: Ati HotKey Poller DISPLAY_NAME: Ati HotKey Poller TYPE : 110 WIN32_OWN_PROCESS (interactive) STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: ATI Smart DISPLAY_NAME: ATI Smart TYPE : 110 WIN32_OWN_PROCESS (interactive) STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: AudioSrv DISPLAY_NAME: Windows Audio TYPE : 20 WIN32_SHARE_PROCESS STATE : 4 RUNNING (STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: Automatic LiveUpdate Scheduler DISPLAY_NAME: Automatic LiveUpdate Scheduler TYPE : 10 WIN32_OWN_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: BITS DISPLAY_NAME: Background Intelligent Transfer Service TYPE : 20 WIN32_SHARE_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: Browser DISPLAY_NAME: Computer Browser TYPE : 20 WIN32_SHARE_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: CiSvc DISPLAY_NAME: Indexing Service TYPE : 120 WIN32_SHARE_PROCESS (interactive) STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: ClipSrv DISPLAY_NAME: ClipBook TYPE : 10 WIN32_OWN_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: clr_optimization_v2.0.50727_32 DISPLAY_NAME: .NET Runtime Optimization Service v2.0.50727_X86 TYPE : 10 WIN32_OWN_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: COMSysApp DISPLAY_NAME: COM+ System Application TYPE : 10 WIN32_OWN_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: CryptSvc DISPLAY_NAME: Cryptographic Services TYPE : 20 WIN32_SHARE_PROCESS STATE : 4 RUNNING (STOPPABLE,NOT_PAUSABLE,ACCEPTS_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: DcomLaunch DISPLAY_NAME: DCOM Server Process Launcher TYPE : 20 WIN32_SHARE_PROCESS STATE : 4 RUNNING (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: Dhcp DISPLAY_NAME: DHCP Client TYPE : 20 WIN32_SHARE_PROCESS STATE : 4 RUNNING (STOPPABLE,NOT_PAUSABLE,ACCEPTS_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: dmadmin DISPLAY_NAME: Logical Disk Manager Administrative Service TYPE : 20 WIN32_SHARE_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: dmserver DISPLAY_NAME: Logical Disk Manager TYPE : 20 WIN32_SHARE_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: Dnscache DISPLAY_NAME: DNS Client TYPE : 20 WIN32_SHARE_PROCESS STATE : 4 RUNNING (STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: ERSvc DISPLAY_NAME: Error Reporting Service TYPE : 20 WIN32_SHARE_PROCESS STATE : 4 RUNNING (STOPPABLE,NOT_PAUSABLE,ACCEPTS_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: Eventlog DISPLAY_NAME: Event Log TYPE : 20 WIN32_SHARE_PROCESS STATE : 4 RUNNING (NOT_STOPPABLE,NOT_PAUSABLE,ACCEPTS_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: EventSystem DISPLAY_NAME: COM+ Event System TYPE : 20 WIN32_SHARE_PROCESS STATE : 4 RUNNING (STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: FastUserSwitchingCompatibility DISPLAY_NAME: Fast User Switching Compatibility TYPE : 20 WIN32_SHARE_PROCESS STATE : 4 RUNNING (STOPPABLE,NOT_PAUSABLE,ACCEPTS_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: Fax DISPLAY_NAME: Fax TYPE : 10 WIN32_OWN_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: FontCache3.0.0.0 DISPLAY_NAME: Windows Presentation Foundation Font Cache 3.0.0.0 TYPE : 10 WIN32_OWN_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: GEARSecurity DISPLAY_NAME: GEARSecurity TYPE : 10 WIN32_OWN_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: helpsvc DISPLAY_NAME: Help and Support TYPE : 20 WIN32_SHARE_PROCESS STATE : 4 RUNNING (STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: HidServ DISPLAY_NAME: Human Interface Device Access TYPE : 20 WIN32_SHARE_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: HTTPFilter DISPLAY_NAME: HTTP SSL TYPE : 20 WIN32_SHARE_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: IDriverT DISPLAY_NAME: InstallDriver Table Manager TYPE : 10 WIN32_OWN_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: idsvc DISPLAY_NAME: Windows CardSpace TYPE : 20 WIN32_SHARE_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: Imapi Helper DISPLAY_NAME: Imapi Helper TYPE : 10 WIN32_OWN_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: ImapiService DISPLAY_NAME: IMAPI CD-Burning COM Service TYPE : 10 WIN32_OWN_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: lanmanserver DISPLAY_NAME: Server TYPE : 20 WIN32_SHARE_PROCESS STATE : 4 RUNNING (STOPPABLE,PAUSABLE,ACCEPTS_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: lanmanworkstation DISPLAY_NAME: Workstation TYPE : 20 WIN32_SHARE_PROCESS STATE : 4 RUNNING (STOPPABLE,PAUSABLE,ACCEPTS_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: LexBceS DISPLAY_NAME: LexBce Server TYPE : 110 WIN32_OWN_PROCESS (interactive) STATE : 4 RUNNING (STOPPABLE,NOT_PAUSABLE,ACCEPTS_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: LiveUpdate DISPLAY_NAME: LiveUpdate TYPE : 20 WIN32_SHARE_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: LmHosts DISPLAY_NAME: TCP/IP NetBIOS Helper TYPE : 20 WIN32_SHARE_PROCESS STATE : 4 RUNNING (STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: lxct_device DISPLAY_NAME: lxct_device TYPE : 110 WIN32_OWN_PROCESS (interactive) STATE : 4 RUNNING (STOPPABLE,PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: MBAMService DISPLAY_NAME: MBAMService TYPE : 10 WIN32_OWN_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: MDM DISPLAY_NAME: Machine Debug Manager TYPE : 110 WIN32_OWN_PROCESS (interactive) STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: Messenger DISPLAY_NAME: Messenger TYPE : 20 WIN32_SHARE_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: mnmsrvc DISPLAY_NAME: NetMeeting Remote Desktop Sharing TYPE : 110 WIN32_OWN_PROCESS (interactive) STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: MSIServer DISPLAY_NAME: Windows Installer TYPE : 20 WIN32_SHARE_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: NetDDE DISPLAY_NAME: Network DDE TYPE : 20 WIN32_SHARE_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: NetDDEdsdm DISPLAY_NAME: Network DDE DSDM TYPE : 20 WIN32_SHARE_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: Netlogon DISPLAY_NAME: Net Logon TYPE : 20 WIN32_SHARE_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: Netman DISPLAY_NAME: Network Connections TYPE : 120 WIN32_SHARE_PROCESS (interactive) STATE : 4 RUNNING (STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: NetTcpPortSharing DISPLAY_NAME: Net.Tcp Port Sharing Service TYPE : 20 WIN32_SHARE_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: Nla DISPLAY_NAME: Network Location Awareness (NLA) TYPE : 20 WIN32_SHARE_PROCESS STATE : 4 RUNNING (STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: Norton AntiVirus DISPLAY_NAME: Norton AntiVirus TYPE : 10 WIN32_OWN_PROCESS STATE : 4 RUNNING (STOPPABLE,NOT_PAUSABLE,ACCEPTS_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: Norton Save and Restore DISPLAY_NAME: Norton Save and Restore TYPE : 10 WIN32_OWN_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: NProtectService DISPLAY_NAME: Norton UnErase Protection TYPE : 110 WIN32_OWN_PROCESS (interactive) STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: NtLmSsp DISPLAY_NAME: NT LM Security Support Provider TYPE : 20 WIN32_SHARE_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: NtmsSvc DISPLAY_NAME: Removable Storage TYPE : 20 WIN32_SHARE_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: ose DISPLAY_NAME: Office Source Engine TYPE : 10 WIN32_OWN_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: PlugPlay DISPLAY_NAME: Plug and Play TYPE : 20 WIN32_SHARE_PROCESS STATE : 4 RUNNING (NOT_STOPPABLE,NOT_PAUSABLE,ACCEPTS_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: PolicyAgent DISPLAY_NAME: IPSEC Services TYPE : 20 WIN32_SHARE_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: ProtectedStorage DISPLAY_NAME: Protected Storage TYPE : 120 WIN32_SHARE_PROCESS (interactive) STATE : 4 RUNNING (STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: psqlWGE DISPLAY_NAME: Pervasive PSQL Workgroup Engine TYPE : 10 WIN32_OWN_PROCESS STATE : 4 RUNNING (STOPPABLE,NOT_PAUSABLE,ACCEPTS_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: RasAuto DISPLAY_NAME: Remote Access Auto Connection Manager TYPE : 20 WIN32_SHARE_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: RasMan DISPLAY_NAME: Remote Access Connection Manager TYPE : 20 WIN32_SHARE_PROCESS STATE : 4 RUNNING (STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: RDSessMgr DISPLAY_NAME: Remote Desktop Help Session Manager TYPE : 10 WIN32_OWN_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: RemoteAccess DISPLAY_NAME: Routing and Remote Access TYPE : 20 WIN32_SHARE_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: RpcLocator DISPLAY_NAME: Remote Procedure Call (RPC) Locator TYPE : 10 WIN32_OWN_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: RpcSs DISPLAY_NAME: Remote Procedure Call (RPC) TYPE : 10 WIN32_OWN_PROCESS STATE : 4 RUNNING (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: RSVP DISPLAY_NAME: QoS RSVP TYPE : 10 WIN32_OWN_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: SamSs DISPLAY_NAME: Security Accounts Manager TYPE : 20 WIN32_SHARE_PROCESS STATE : 4 RUNNING (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: SCardSvr DISPLAY_NAME: Smart Card TYPE : 20 WIN32_SHARE_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: Schedule DISPLAY_NAME: Task Scheduler TYPE : 20 WIN32_SHARE_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: seclogon DISPLAY_NAME: Secondary Logon TYPE : 120 WIN32_SHARE_PROCESS (interactive) STATE : 4 RUNNING (STOPPABLE,PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: SENS DISPLAY_NAME: System Event Notification TYPE : 20 WIN32_SHARE_PROCESS STATE : 4 RUNNING (STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: SharedAccess DISPLAY_NAME: Windows Firewall/Internet Connection Sharing (ICS) TYPE : 20 WIN32_SHARE_PROCESS STATE : 4 RUNNING (STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: ShellHWDetection DISPLAY_NAME: Shell Hardware Detection TYPE : 20 WIN32_SHARE_PROCESS STATE : 4 RUNNING (STOPPABLE,PAUSABLE,ACCEPTS_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: Speed Disk service DISPLAY_NAME: Speed Disk service TYPE : 110 WIN32_OWN_PROCESS (interactive) STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: Spooler DISPLAY_NAME: Print Spooler TYPE : 110 WIN32_OWN_PROCESS (interactive) STATE : 4 RUNNING (STOPPABLE,NOT_PAUSABLE,ACCEPTS_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: srservice DISPLAY_NAME: System Restore Service TYPE : 20 WIN32_SHARE_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: SSDPSRV DISPLAY_NAME: SSDP Discovery Service TYPE : 20 WIN32_SHARE_PROCESS STATE : 4 RUNNING (STOPPABLE,NOT_PAUSABLE,ACCEPTS_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: stisvc DISPLAY_NAME: Windows Image Acquisition (WIA) TYPE : 20 WIN32_SHARE_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: SwPrv DISPLAY_NAME: MS Software Shadow Copy Provider TYPE : 10 WIN32_OWN_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: Symantec RemoteAssist DISPLAY_NAME: Symantec RemoteAssist TYPE : 110 WIN32_OWN_PROCESS (interactive) STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: SysmonLog DISPLAY_NAME: Performance Logs and Alerts TYPE : 10 WIN32_OWN_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: TapiSrv DISPLAY_NAME: Telephony TYPE : 20 WIN32_SHARE_PROCESS STATE : 4 RUNNING (STOPPABLE,PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: TermService DISPLAY_NAME: Terminal Services TYPE : 20 WIN32_SHARE_PROCESS STATE : 4 RUNNING (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: Themes DISPLAY_NAME: Themes TYPE : 20 WIN32_SHARE_PROCESS STATE : 4 RUNNING (STOPPABLE,NOT_PAUSABLE,ACCEPTS_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: TrkWks DISPLAY_NAME: Distributed Link Tracking Client TYPE : 20 WIN32_SHARE_PROCESS STATE : 4 RUNNING (STOPPABLE,NOT_PAUSABLE,ACCEPTS_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: upnphost DISPLAY_NAME: Universal Plug and Play Device Host TYPE : 20 WIN32_SHARE_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: UPS DISPLAY_NAME: Uninterruptible Power Supply TYPE : 10 WIN32_OWN_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: Viewpoint Manager Service DISPLAY_NAME: Viewpoint Manager Service TYPE : 110 WIN32_OWN_PROCESS (interactive) STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: VSS DISPLAY_NAME: Volume Shadow Copy TYPE : 10 WIN32_OWN_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: W32Time DISPLAY_NAME: Windows Time TYPE : 20 WIN32_SHARE_PROCESS STATE : 4 RUNNING (STOPPABLE,NOT_PAUSABLE,ACCEPTS_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: WebClient DISPLAY_NAME: WebClient TYPE : 10 WIN32_OWN_PROCESS STATE : 4 RUNNING (STOPPABLE,NOT_PAUSABLE,ACCEPTS_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: winmgmt DISPLAY_NAME: Windows Management Instrumentation TYPE : 20 WIN32_SHARE_PROCESS STATE : 4 RUNNING (STOPPABLE,PAUSABLE,ACCEPTS_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: WmdmPmSN DISPLAY_NAME: Portable Media Serial Number Service TYPE : 20 WIN32_SHARE_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: WmiApSrv DISPLAY_NAME: WMI Performance Adapter TYPE : 10 WIN32_OWN_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: WMPNetworkSvc DISPLAY_NAME: Windows Media Player Network Sharing Service TYPE : 10 WIN32_OWN_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: wscsvc DISPLAY_NAME: Security Center TYPE : 20 WIN32_SHARE_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: wuauserv DISPLAY_NAME: Automatic Updates TYPE : 20 WIN32_SHARE_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: WudfSvc DISPLAY_NAME: Windows Driver Foundation - User-mode Driver Framework TYPE : 20 WIN32_SHARE_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: WZCSVC DISPLAY_NAME: Wireless Zero Configuration TYPE : 20 WIN32_SHARE_PROCESS STATE : 4 RUNNING (STOPPABLE,NOT_PAUSABLE,ACCEPTS_SHUTDOWN) WIN32_EXIT_CODE : 0 (0x0) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 SERVICE_NAME: xmlprov DISPLAY_NAME: Network Provisioning Service TYPE : 20 WIN32_SHARE_PROCESS STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 1077 (0x435) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 |
#52
|
|||
|
|||
WIA and hibernation again
You stated after the hibernation time (2 hours) your HD light is flashing?
At that point did you open task manager and check what processes is running and whether or not an application is running? Also have you compared the services when starting to hibernate against the services after one hour? "William B. Lurie" wrote in message ... Unknown wrote: Thanks. Without sitting at your machine and observing various items I can only go through the process of elimination. It seems something is calling for the internet about every hour. May I ask what you mean when you say Norton fixes their Boo-boos by remote control? Sure. I go to their website and find tech support, for which one option is one-on-one online chat with their 'analyst'. I describe the problem, he (she) asks for permission to connect to my machine remotely, I give it, then he takes control of my cursor as tho' he was sitting in my chair, clicks and clacks, even downloads new upgrades software, installs, he and I check that he has fixed the problem, and I terminate the 'chat' session. The wait isn't usually long, typically 5 to 15 minutes. It's calling for *something* after one hour, which is why it doesn't reach the 2-hour hibernate, but as for calling the Internet, I don't know if we've proven that........ "William B. Lurie" wrote in message ... Unknown wrote: Can you verify the default time is still 0x00093a80 in the registry. If it is trying to sync your clock too often then perhaps that would prevent hibernation. Savings time changeover would not be affected. "William B. Lurie" wrote in message ... Unknown wrote: Curiosity question. Did you at any time alter the time interval for when you sync your clock? Check your registry at: HKEY_LOCAL_MACHINE\System\currentcontrolset\servic es\w32Time\TimeProviders\NTPclient in right pane special poll interval is a hexidecimal count in seconds. For one week (XP default time) it is 0x00093a80 (604800) "William B. Lurie" wrote in message No, I've never been there. It of course did the Savings Time changeover with no hitch at all. This problem goes back way beyond 10 days ago....... Just to check back with you, UNk, I checked and my setting is indeed as you showed, for SpecialPollInterval. Back to the drawing board......... |
#53
|
|||
|
|||
WIA and hibernation again
John John - MVP wrote:
William B. Lurie wrote: Event Type: Error Event Source: DCOM Event Category: None Event ID: 10005 Date: 4/1/2010 Time: 6:40:36 AM User: COMPAQ-2006\Compaq_Owner Computer: COMPAQ-2006 Description: DCOM got error "The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. " attempting to start the service MDM with arguments "" in order to run the server: {0C0A3666-30C9-11D0-8F20-00805F2CD064} For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Event Type: Error Event Source: DCOM Event Category: None Event ID: 10005 Date: 4/1/2010 Time: 6:35:10 AM User: COMPAQ-2006\Compaq_Owner Computer: COMPAQ-2006 Description: DCOM got error "The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. " attempting to start the service MDM with arguments "" in order to run the server: {0C0A3666-30C9-11D0-8F20-00805F2CD064} For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Event Type: Error Event Source: Ntfs Event Category: Disk Event ID: 55 Date: 4/1/2010 Time: 6:42:47 AM User: N/A Computer: COMPAQ-2006 Description: The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume R:. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 0d 00 00 00 02 00 4e 00 ......N. 0008: 02 00 00 00 37 00 04 c0 ....7..À 0010: 00 00 00 00 32 00 00 c0 ....2..À 0018: 00 00 00 00 00 00 00 00 ........ 0020: 00 00 00 00 00 00 00 00 ........ Event Type: Error Event Source: Service Control Manager Event Category: None Event ID: 7026 Date: 4/1/2010 Time: 6:44:25 AM User: N/A Computer: COMPAQ-2006 Description: The following boot-start or system-start driver(s) failed to load: ftsata2 KLIF Is that an updated and current list of started Windows services? Yes, John, I generate it anew every time I make one of these hibernation runs, so that you can see it right with the Events. You discussed about those two drivers with another poster not too long ago. Yes, and now I'll answer your queries: ftsata2: Do you now, or did you at any time have a Promise controller installed? No, I do not now, and never did. This basic HP machine came with one hard drive, and cabling and slots for two more, which I added. I select which drive to run by interrupting boot process and telling it. KLIF: Do you now or did you at any time have Kaspersky AV software installed on the machine? No, I have used Norton AV steadily for at least 15 years. From the days when Norton was impossible to work with, to the present, where they fix boo-boos by Chat and remote control of their software. The chkdsk message... What do you have stored on volume R? Oh, I missed that it was referring to volume R. I have numerous 'restore points' of which that volume is one. I generate these every month or so, using the Save & Restore feature of Norton System Works, which used to be PowerQuest Partition Magic. I keep these in case I have to recreate a system as it was as of an earlier date). I'll chkdsk it routinely but I think we can ignore that Event. These system-start driver errors shouldn't affect the ability to hibernate but you can change their startup type and get rid of the errors if you want. You will have to change them in the registry at their respective subkeys in the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es key , set their Start Value to 0x3 or 0x4. 0x3 is manual start, 0x4 is disabled. Or, we can change them at the command prompt if you wish, I need the results of the following command before I can give you the proper commands to change the start type: sc query state= all c:\sc.txt Copy and paste the contents of the generated sc.txt file to your next post, there will be lots of verbiage in the file, post it all. John I don't mess with registry unless it has to be messed with. And if those commands and errors are innocuous, I see no need to mess with them via command prompt. And the chkdsk request was a blind alley, and to be sure, I deleted that 2+ year old backup anyway. But what to do next? With all this time spent on the hibernate problem, I hate to give up. Who knows, the answer may be just around the next bend in the road. |
#54
|
|||
|
|||
WIA and hibernation again
Unknown wrote:
You stated after the hibernation time (2 hours) your HD light is flashing? At that point did you open task manager and check what processes is running and whether or not an application is running? No, but I will next time around. What I see there most often, during these test runs, is nothing related to the user except HpBootOpt, but plenty of System and Local Service with many many 'svchost.exe', none of which are under my control. The sequence is, first desktop; then Screen Saver: then Monitor shutoff (never), then HD shutoff (20 minutes), then System Standby (25 min.) and finally hibernate (2 hours). After 2 hours or more have elapsed, the mintor is in reduced power, the power-on light is flashing, and that's all. It never goes to hibernate, which would be indicated by the power-on light turning off. Also have you compared the services when starting to hibernate against the services after one hour? "William B. Lurie" wrote in message ... Unknown wrote: Thanks. Without sitting at your machine and observing various items I can only go through the process of elimination. It seems something is calling for the internet about every hour. May I ask what you mean when you say Norton fixes their Boo-boos by remote control? Sure. I go to their website and find tech support, for which one option is one-on-one online chat with their 'analyst'. I describe the problem, he (she) asks for permission to connect to my machine remotely, I give it, then he takes control of my cursor as tho' he was sitting in my chair, clicks and clacks, even downloads new upgrades software, installs, he and I check that he has fixed the problem, and I terminate the 'chat' session. The wait isn't usually long, typically 5 to 15 minutes. It's calling for *something* after one hour, which is why it doesn't reach the 2-hour hibernate, but as for calling the Internet, I don't know if we've proven that........ "William B. Lurie" wrote in message ... Unknown wrote: Can you verify the default time is still 0x00093a80 in the registry. If it is trying to sync your clock too often then perhaps that would prevent hibernation. Savings time changeover would not be affected. "William B. Lurie" wrote in message ... Unknown wrote: Curiosity question. Did you at any time alter the time interval for when you sync your clock? Check your registry at: HKEY_LOCAL_MACHINE\System\currentcontrolset\servic es\w32Time\TimeProviders\NTPclient in right pane special poll interval is a hexidecimal count in seconds. For one week (XP default time) it is 0x00093a80 (604800) "William B. Lurie" wrote in message No, I've never been there. It of course did the Savings Time changeover with no hitch at all. This problem goes back way beyond 10 days ago....... Just to check back with you, UNk, I checked and my setting is indeed as you showed, for SpecialPollInterval. Back to the drawing board......... |
#55
|
|||
|
|||
WIA and hibernation again
Do a Google search for 'power on light flashing' Lots of info there.
"William B. Lurie" wrote in message ... Unknown wrote: You stated after the hibernation time (2 hours) your HD light is flashing? At that point did you open task manager and check what processes is running and whether or not an application is running? No, but I will next time around. What I see there most often, during these test runs, is nothing related to the user except HpBootOpt, but plenty of System and Local Service with many many 'svchost.exe', none of which are under my control. The sequence is, first desktop; then Screen Saver: then Monitor shutoff (never), then HD shutoff (20 minutes), then System Standby (25 min.) and finally hibernate (2 hours). After 2 hours or more have elapsed, the mintor is in reduced power, the power-on light is flashing, and that's all. It never goes to hibernate, which would be indicated by the power-on light turning off. Also have you compared the services when starting to hibernate against the services after one hour? "William B. Lurie" wrote in message ... Unknown wrote: Thanks. Without sitting at your machine and observing various items I can only go through the process of elimination. It seems something is calling for the internet about every hour. May I ask what you mean when you say Norton fixes their Boo-boos by remote control? Sure. I go to their website and find tech support, for which one option is one-on-one online chat with their 'analyst'. I describe the problem, he (she) asks for permission to connect to my machine remotely, I give it, then he takes control of my cursor as tho' he was sitting in my chair, clicks and clacks, even downloads new upgrades software, installs, he and I check that he has fixed the problem, and I terminate the 'chat' session. The wait isn't usually long, typically 5 to 15 minutes. It's calling for *something* after one hour, which is why it doesn't reach the 2-hour hibernate, but as for calling the Internet, I don't know if we've proven that........ "William B. Lurie" wrote in message ... Unknown wrote: Can you verify the default time is still 0x00093a80 in the registry. If it is trying to sync your clock too often then perhaps that would prevent hibernation. Savings time changeover would not be affected. "William B. Lurie" wrote in message ... Unknown wrote: Curiosity question. Did you at any time alter the time interval for when you sync your clock? Check your registry at: HKEY_LOCAL_MACHINE\System\currentcontrolset\servic es\w32Time\TimeProviders\NTPclient in right pane special poll interval is a hexidecimal count in seconds. For one week (XP default time) it is 0x00093a80 (604800) "William B. Lurie" wrote in message No, I've never been there. It of course did the Savings Time changeover with no hitch at all. This problem goes back way beyond 10 days ago....... Just to check back with you, UNk, I checked and my setting is indeed as you showed, for SpecialPollInterval. Back to the drawing board......... |
#56
|
|||
|
|||
WIA and hibernation again
William B. Lurie wrote:
John John - MVP wrote: William B. Lurie wrote: Event Type: Error Event Source: DCOM Event Category: None Event ID: 10005 Date: 4/1/2010 Time: 6:40:36 AM User: COMPAQ-2006\Compaq_Owner Computer: COMPAQ-2006 Description: DCOM got error "The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. " attempting to start the service MDM with arguments "" in order to run the server: {0C0A3666-30C9-11D0-8F20-00805F2CD064} For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Event Type: Error Event Source: DCOM Event Category: None Event ID: 10005 Date: 4/1/2010 Time: 6:35:10 AM User: COMPAQ-2006\Compaq_Owner Computer: COMPAQ-2006 Description: DCOM got error "The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. " attempting to start the service MDM with arguments "" in order to run the server: {0C0A3666-30C9-11D0-8F20-00805F2CD064} For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Event Type: Error Event Source: Ntfs Event Category: Disk Event ID: 55 Date: 4/1/2010 Time: 6:42:47 AM User: N/A Computer: COMPAQ-2006 Description: The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume R:. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 0d 00 00 00 02 00 4e 00 ......N. 0008: 02 00 00 00 37 00 04 c0 ....7..À 0010: 00 00 00 00 32 00 00 c0 ....2..À 0018: 00 00 00 00 00 00 00 00 ........ 0020: 00 00 00 00 00 00 00 00 ........ Event Type: Error Event Source: Service Control Manager Event Category: None Event ID: 7026 Date: 4/1/2010 Time: 6:44:25 AM User: N/A Computer: COMPAQ-2006 Description: The following boot-start or system-start driver(s) failed to load: ftsata2 KLIF Is that an updated and current list of started Windows services? Yes, John, I generate it anew every time I make one of these hibernation runs, so that you can see it right with the Events. You discussed about those two drivers with another poster not too long ago. Yes, and now I'll answer your queries: ftsata2: Do you now, or did you at any time have a Promise controller installed? No, I do not now, and never did. This basic HP machine came with one hard drive, and cabling and slots for two more, which I added. I select which drive to run by interrupting boot process and telling it. KLIF: Do you now or did you at any time have Kaspersky AV software installed on the machine? No, I have used Norton AV steadily for at least 15 years. From the days when Norton was impossible to work with, to the present, where they fix boo-boos by Chat and remote control of their software. The chkdsk message... What do you have stored on volume R? Oh, I missed that it was referring to volume R. I have numerous 'restore points' of which that volume is one. I generate these every month or so, using the Save & Restore feature of Norton System Works, which used to be PowerQuest Partition Magic. I keep these in case I have to recreate a system as it was as of an earlier date). I'll chkdsk it routinely but I think we can ignore that Event. These system-start driver errors shouldn't affect the ability to hibernate but you can change their startup type and get rid of the errors if you want. You will have to change them in the registry at their respective subkeys in the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es key , set their Start Value to 0x3 or 0x4. 0x3 is manual start, 0x4 is disabled. Or, we can change them at the command prompt if you wish, I need the results of the following command before I can give you the proper commands to change the start type: sc query state= all c:\sc.txt Copy and paste the contents of the generated sc.txt file to your next post, there will be lots of verbiage in the file, post it all. John I don't mess with registry unless it has to be messed with. And if those commands and errors are innocuous, I see no need to mess with them via command prompt. And the chkdsk request was a blind alley, and to be sure, I deleted that 2+ year old backup anyway. But what to do next? With all this time spent on the hibernate problem, I hate to give up. Who knows, the answer may be just around the next bend in the road. I don't see the KLIF or ftsata2 driver on the sc query list that you supplied... could be that they are on the clone but not on the production machine, or that the sc command doesn't see these as services. You can try these and see what it returns: sc query klif sc query ftsata2 We could also get the list of drivers with a different command: driverquery c:\drivers.txt If you want to solve the problem you need to keep on investigating until you find what it is that is running or starting and that prevents hibernation, I don't know of an easy way to figure this out. Sometimes you need dogged determination to get to the bottom of some of these problems. John |
#57
|
|||
|
|||
WIA and hibernation again
John John - MVP wrote:
William B. Lurie wrote: John John - MVP wrote: William B. Lurie wrote: Event Type: Error Event Source: DCOM Event Category: None Event ID: 10005 Date: 4/1/2010 Time: 6:40:36 AM User: COMPAQ-2006\Compaq_Owner Computer: COMPAQ-2006 Description: DCOM got error "The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. " attempting to start the service MDM with arguments "" in order to run the server: {0C0A3666-30C9-11D0-8F20-00805F2CD064} For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Event Type: Error Event Source: DCOM Event Category: None Event ID: 10005 Date: 4/1/2010 Time: 6:35:10 AM User: COMPAQ-2006\Compaq_Owner Computer: COMPAQ-2006 Description: DCOM got error "The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. " attempting to start the service MDM with arguments "" in order to run the server: {0C0A3666-30C9-11D0-8F20-00805F2CD064} For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Event Type: Error Event Source: Ntfs Event Category: Disk Event ID: 55 Date: 4/1/2010 Time: 6:42:47 AM User: N/A Computer: COMPAQ-2006 Description: The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume R:. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 0d 00 00 00 02 00 4e 00 ......N. 0008: 02 00 00 00 37 00 04 c0 ....7..À 0010: 00 00 00 00 32 00 00 c0 ....2..À 0018: 00 00 00 00 00 00 00 00 ........ 0020: 00 00 00 00 00 00 00 00 ........ Event Type: Error Event Source: Service Control Manager Event Category: None Event ID: 7026 Date: 4/1/2010 Time: 6:44:25 AM User: N/A Computer: COMPAQ-2006 Description: The following boot-start or system-start driver(s) failed to load: ftsata2 KLIF Is that an updated and current list of started Windows services? Yes, John, I generate it anew every time I make one of these hibernation runs, so that you can see it right with the Events. You discussed about those two drivers with another poster not too long ago. Yes, and now I'll answer your queries: ftsata2: Do you now, or did you at any time have a Promise controller installed? No, I do not now, and never did. This basic HP machine came with one hard drive, and cabling and slots for two more, which I added. I select which drive to run by interrupting boot process and telling it. KLIF: Do you now or did you at any time have Kaspersky AV software installed on the machine? No, I have used Norton AV steadily for at least 15 years. From the days when Norton was impossible to work with, to the present, where they fix boo-boos by Chat and remote control of their software. The chkdsk message... What do you have stored on volume R? Oh, I missed that it was referring to volume R. I have numerous 'restore points' of which that volume is one. I generate these every month or so, using the Save & Restore feature of Norton System Works, which used to be PowerQuest Partition Magic. I keep these in case I have to recreate a system as it was as of an earlier date). I'll chkdsk it routinely but I think we can ignore that Event. These system-start driver errors shouldn't affect the ability to hibernate but you can change their startup type and get rid of the errors if you want. You will have to change them in the registry at their respective subkeys in the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es key , set their Start Value to 0x3 or 0x4. 0x3 is manual start, 0x4 is disabled. Or, we can change them at the command prompt if you wish, I need the results of the following command before I can give you the proper commands to change the start type: sc query state= all c:\sc.txt Copy and paste the contents of the generated sc.txt file to your next post, there will be lots of verbiage in the file, post it all. John I don't mess with registry unless it has to be messed with. And if those commands and errors are innocuous, I see no need to mess with them via command prompt. And the chkdsk request was a blind alley, and to be sure, I deleted that 2+ year old backup anyway. But what to do next? With all this time spent on the hibernate problem, I hate to give up. Who knows, the answer may be just around the next bend in the road. I don't see the KLIF or ftsata2 driver on the sc query list that you supplied... could be that they are on the clone but not on the production machine, or that the sc command doesn't see these as services. You can try these and see what it returns: sc query klif sc query ftsata2 They're both there, John. One of them is: SERVICE_NAME: ftsata2 TYPE : 1 KERNEL_DRIVER STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 31 (0x1f) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 The other one reads the same but I misplaced it.....the same except it said klif and one other change (I think TYPE -------CONTROL). We could also get the list of drivers with a different command: driverquery c:\drivers.txt It didn't recognize that command. If you want to solve the problem you need to keep on investigating until you find what it is that is running or starting and that prevents hibernation, I don't know of an easy way to figure this out. Sometimes you need dogged determination to get to the bottom of some of these problems. Oh, you're right, John. We've both invested too much time and intellect in it, and I'd hate to drop it, either. But, as I said, what next? |
#58
|
|||
|
|||
WIA and hibernation again
William B. Lurie wrote:
John John - MVP wrote: William B. Lurie wrote: John John - MVP wrote: William B. Lurie wrote: Event Type: Error Event Source: DCOM Event Category: None Event ID: 10005 Date: 4/1/2010 Time: 6:40:36 AM User: COMPAQ-2006\Compaq_Owner Computer: COMPAQ-2006 Description: DCOM got error "The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. " attempting to start the service MDM with arguments "" in order to run the server: {0C0A3666-30C9-11D0-8F20-00805F2CD064} For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Event Type: Error Event Source: DCOM Event Category: None Event ID: 10005 Date: 4/1/2010 Time: 6:35:10 AM User: COMPAQ-2006\Compaq_Owner Computer: COMPAQ-2006 Description: DCOM got error "The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. " attempting to start the service MDM with arguments "" in order to run the server: {0C0A3666-30C9-11D0-8F20-00805F2CD064} For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Event Type: Error Event Source: Ntfs Event Category: Disk Event ID: 55 Date: 4/1/2010 Time: 6:42:47 AM User: N/A Computer: COMPAQ-2006 Description: The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume R:. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 0d 00 00 00 02 00 4e 00 ......N. 0008: 02 00 00 00 37 00 04 c0 ....7..À 0010: 00 00 00 00 32 00 00 c0 ....2..À 0018: 00 00 00 00 00 00 00 00 ........ 0020: 00 00 00 00 00 00 00 00 ........ Event Type: Error Event Source: Service Control Manager Event Category: None Event ID: 7026 Date: 4/1/2010 Time: 6:44:25 AM User: N/A Computer: COMPAQ-2006 Description: The following boot-start or system-start driver(s) failed to load: ftsata2 KLIF Is that an updated and current list of started Windows services? Yes, John, I generate it anew every time I make one of these hibernation runs, so that you can see it right with the Events. You discussed about those two drivers with another poster not too long ago. Yes, and now I'll answer your queries: ftsata2: Do you now, or did you at any time have a Promise controller installed? No, I do not now, and never did. This basic HP machine came with one hard drive, and cabling and slots for two more, which I added. I select which drive to run by interrupting boot process and telling it. KLIF: Do you now or did you at any time have Kaspersky AV software installed on the machine? No, I have used Norton AV steadily for at least 15 years. From the days when Norton was impossible to work with, to the present, where they fix boo-boos by Chat and remote control of their software. The chkdsk message... What do you have stored on volume R? Oh, I missed that it was referring to volume R. I have numerous 'restore points' of which that volume is one. I generate these every month or so, using the Save & Restore feature of Norton System Works, which used to be PowerQuest Partition Magic. I keep these in case I have to recreate a system as it was as of an earlier date). I'll chkdsk it routinely but I think we can ignore that Event. These system-start driver errors shouldn't affect the ability to hibernate but you can change their startup type and get rid of the errors if you want. You will have to change them in the registry at their respective subkeys in the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es key , set their Start Value to 0x3 or 0x4. 0x3 is manual start, 0x4 is disabled. Or, we can change them at the command prompt if you wish, I need the results of the following command before I can give you the proper commands to change the start type: sc query state= all c:\sc.txt Copy and paste the contents of the generated sc.txt file to your next post, there will be lots of verbiage in the file, post it all. John I don't mess with registry unless it has to be messed with. And if those commands and errors are innocuous, I see no need to mess with them via command prompt. And the chkdsk request was a blind alley, and to be sure, I deleted that 2+ year old backup anyway. But what to do next? With all this time spent on the hibernate problem, I hate to give up. Who knows, the answer may be just around the next bend in the road. I don't see the KLIF or ftsata2 driver on the sc query list that you supplied... could be that they are on the clone but not on the production machine, or that the sc command doesn't see these as services. You can try these and see what it returns: sc query klif sc query ftsata2 They're both there, John. One of them is: SERVICE_NAME: ftsata2 TYPE : 1 KERNEL_DRIVER STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 31 (0x1f) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 The other one reads the same but I misplaced it.....the same except it said klif and one other change (I think TYPE -------CONTROL).xxxxxx SEE BELOW!!!! xxxxxxxx We could also get the list of drivers with a different command: driverquery c:\drivers.txt It didn't recognize that command. If you want to solve the problem you need to keep on investigating until you find what it is that is running or starting and that prevents hibernation, I don't know of an easy way to figure this out. Sometimes you need dogged determination to get to the bottom of some of these problems. Oh, you're right, John. We've both invested too much time and intellect in it, and I'd hate to drop it, either. But, as I said, what next? Here's the other one.....from the Clone; both are on both drives: SERVICE_NAME: klif TYPE : 2 FILE_SYSTEM_DRIVER STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 31 (0x1f) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 |
#59
|
|||
|
|||
WIA and hibernation again
William B. Lurie wrote:
John John - MVP wrote: William B. Lurie wrote: John John - MVP wrote: William B. Lurie wrote: Event Type: Error Event Source: DCOM Event Category: None Event ID: 10005 Date: 4/1/2010 Time: 6:40:36 AM User: COMPAQ-2006\Compaq_Owner Computer: COMPAQ-2006 Description: DCOM got error "The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. " attempting to start the service MDM with arguments "" in order to run the server: {0C0A3666-30C9-11D0-8F20-00805F2CD064} For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Event Type: Error Event Source: DCOM Event Category: None Event ID: 10005 Date: 4/1/2010 Time: 6:35:10 AM User: COMPAQ-2006\Compaq_Owner Computer: COMPAQ-2006 Description: DCOM got error "The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. " attempting to start the service MDM with arguments "" in order to run the server: {0C0A3666-30C9-11D0-8F20-00805F2CD064} For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Event Type: Error Event Source: Ntfs Event Category: Disk Event ID: 55 Date: 4/1/2010 Time: 6:42:47 AM User: N/A Computer: COMPAQ-2006 Description: The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume R:. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 0d 00 00 00 02 00 4e 00 ......N. 0008: 02 00 00 00 37 00 04 c0 ....7..À 0010: 00 00 00 00 32 00 00 c0 ....2..À 0018: 00 00 00 00 00 00 00 00 ........ 0020: 00 00 00 00 00 00 00 00 ........ Event Type: Error Event Source: Service Control Manager Event Category: None Event ID: 7026 Date: 4/1/2010 Time: 6:44:25 AM User: N/A Computer: COMPAQ-2006 Description: The following boot-start or system-start driver(s) failed to load: ftsata2 KLIF Is that an updated and current list of started Windows services? Yes, John, I generate it anew every time I make one of these hibernation runs, so that you can see it right with the Events. You discussed about those two drivers with another poster not too long ago. Yes, and now I'll answer your queries: ftsata2: Do you now, or did you at any time have a Promise controller installed? No, I do not now, and never did. This basic HP machine came with one hard drive, and cabling and slots for two more, which I added. I select which drive to run by interrupting boot process and telling it. KLIF: Do you now or did you at any time have Kaspersky AV software installed on the machine? No, I have used Norton AV steadily for at least 15 years. From the days when Norton was impossible to work with, to the present, where they fix boo-boos by Chat and remote control of their software. The chkdsk message... What do you have stored on volume R? Oh, I missed that it was referring to volume R. I have numerous 'restore points' of which that volume is one. I generate these every month or so, using the Save & Restore feature of Norton System Works, which used to be PowerQuest Partition Magic. I keep these in case I have to recreate a system as it was as of an earlier date). I'll chkdsk it routinely but I think we can ignore that Event. These system-start driver errors shouldn't affect the ability to hibernate but you can change their startup type and get rid of the errors if you want. You will have to change them in the registry at their respective subkeys in the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es key , set their Start Value to 0x3 or 0x4. 0x3 is manual start, 0x4 is disabled. Or, we can change them at the command prompt if you wish, I need the results of the following command before I can give you the proper commands to change the start type: sc query state= all c:\sc.txt Copy and paste the contents of the generated sc.txt file to your next post, there will be lots of verbiage in the file, post it all. John I don't mess with registry unless it has to be messed with. And if those commands and errors are innocuous, I see no need to mess with them via command prompt. And the chkdsk request was a blind alley, and to be sure, I deleted that 2+ year old backup anyway. But what to do next? With all this time spent on the hibernate problem, I hate to give up. Who knows, the answer may be just around the next bend in the road. I don't see the KLIF or ftsata2 driver on the sc query list that you supplied... could be that they are on the clone but not on the production machine, or that the sc command doesn't see these as services. You can try these and see what it returns: sc query klif sc query ftsata2 They're both there, John. One of them is: SERVICE_NAME: ftsata2 TYPE : 1 KERNEL_DRIVER STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 31 (0x1f) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 The other one reads the same but I misplaced it.....the same except it said klif and one other change (I think TYPE -------CONTROL). At the command prompt do: sc config klif start= demand sc config ftsata2 start= demand You should get a ChangeServiceConfig message indicating success or failure. We could also get the list of drivers with a different command: driverquery c:\drivers.txt It didn't recognize that command. Another utility that is included in XP Pro but not in XP Home... If you want to solve the problem you need to keep on investigating until you find what it is that is running or starting and that prevents hibernation, I don't know of an easy way to figure this out. Sometimes you need dogged determination to get to the bottom of some of these problems. Oh, you're right, John. We've both invested too much time and intellect in it, and I'd hate to drop it, either. But, as I said, what next? Make sure that you don't have a 3D screen saver running. Disconnect the network cable and see if things change, maybe something from 'outside' is keeping the machine alive. See what shows up in the Event Log, if there is nothing to be found in the Event Log start investigating the Loaded Modules. John |
#60
|
|||
|
|||
WIA and hibernation again
John John - MVP wrote:
William B. Lurie wrote: John John - MVP wrote: William B. Lurie wrote: John John - MVP wrote: William B. Lurie wrote: Event Type: Error Event Source: DCOM Event Category: None Event ID: 10005 Date: 4/1/2010 Time: 6:40:36 AM User: COMPAQ-2006\Compaq_Owner Computer: COMPAQ-2006 Description: DCOM got error "The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. " attempting to start the service MDM with arguments "" in order to run the server: {0C0A3666-30C9-11D0-8F20-00805F2CD064} For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Event Type: Error Event Source: DCOM Event Category: None Event ID: 10005 Date: 4/1/2010 Time: 6:35:10 AM User: COMPAQ-2006\Compaq_Owner Computer: COMPAQ-2006 Description: DCOM got error "The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. " attempting to start the service MDM with arguments "" in order to run the server: {0C0A3666-30C9-11D0-8F20-00805F2CD064} For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Event Type: Error Event Source: Ntfs Event Category: Disk Event ID: 55 Date: 4/1/2010 Time: 6:42:47 AM User: N/A Computer: COMPAQ-2006 Description: The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume R:. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 0d 00 00 00 02 00 4e 00 ......N. 0008: 02 00 00 00 37 00 04 c0 ....7..À 0010: 00 00 00 00 32 00 00 c0 ....2..À 0018: 00 00 00 00 00 00 00 00 ........ 0020: 00 00 00 00 00 00 00 00 ........ Event Type: Error Event Source: Service Control Manager Event Category: None Event ID: 7026 Date: 4/1/2010 Time: 6:44:25 AM User: N/A Computer: COMPAQ-2006 Description: The following boot-start or system-start driver(s) failed to load: ftsata2 KLIF Is that an updated and current list of started Windows services? Yes, John, I generate it anew every time I make one of these hibernation runs, so that you can see it right with the Events. You discussed about those two drivers with another poster not too long ago. Yes, and now I'll answer your queries: ftsata2: Do you now, or did you at any time have a Promise controller installed? No, I do not now, and never did. This basic HP machine came with one hard drive, and cabling and slots for two more, which I added. I select which drive to run by interrupting boot process and telling it. KLIF: Do you now or did you at any time have Kaspersky AV software installed on the machine? No, I have used Norton AV steadily for at least 15 years. From the days when Norton was impossible to work with, to the present, where they fix boo-boos by Chat and remote control of their software. The chkdsk message... What do you have stored on volume R? Oh, I missed that it was referring to volume R. I have numerous 'restore points' of which that volume is one. I generate these every month or so, using the Save & Restore feature of Norton System Works, which used to be PowerQuest Partition Magic. I keep these in case I have to recreate a system as it was as of an earlier date). I'll chkdsk it routinely but I think we can ignore that Event. These system-start driver errors shouldn't affect the ability to hibernate but you can change their startup type and get rid of the errors if you want. You will have to change them in the registry at their respective subkeys in the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es key , set their Start Value to 0x3 or 0x4. 0x3 is manual start, 0x4 is disabled. Or, we can change them at the command prompt if you wish, I need the results of the following command before I can give you the proper commands to change the start type: sc query state= all c:\sc.txt Copy and paste the contents of the generated sc.txt file to your next post, there will be lots of verbiage in the file, post it all. John I don't mess with registry unless it has to be messed with. And if those commands and errors are innocuous, I see no need to mess with them via command prompt. And the chkdsk request was a blind alley, and to be sure, I deleted that 2+ year old backup anyway. But what to do next? With all this time spent on the hibernate problem, I hate to give up. Who knows, the answer may be just around the next bend in the road. I don't see the KLIF or ftsata2 driver on the sc query list that you supplied... could be that they are on the clone but not on the production machine, or that the sc command doesn't see these as services. You can try these and see what it returns: sc query klif sc query ftsata2 They're both there, John. One of them is: SERVICE_NAME: ftsata2 TYPE : 1 KERNEL_DRIVER STATE : 1 STOPPED (NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN) WIN32_EXIT_CODE : 31 (0x1f) SERVICE_EXIT_CODE : 0 (0x0) CHECKPOINT : 0x0 WAIT_HINT : 0x0 The other one reads the same but I misplaced it.....the same except it said klif and one other change (I think TYPE -------CONTROL). At the command prompt do: sc config klif start= demand sc config ftsata2 start= demand You should get a ChangeServiceConfig message indicating success or failure. Okay, I'll try those. We could also get the list of drivers with a different command: driverquery c:\drivers.txt It didn't recognize that command. Another utility that is included in XP Pro but not in XP Home... If you want to solve the problem you need to keep on investigating until you find what it is that is running or starting and that prevents hibernation, I don't know of an easy way to figure this out. Sometimes you need dogged determination to get to the bottom of some of these problems. Oh, you're right, John. We've both invested too much time and intellect in it, and I'd hate to drop it, either. But, as I said, what next? Make sure that you don't have a 3D screen saver running. Only screen saver is garden variety generic via StartDisplayScreen Saver that came with XP. Disconnect the network cable and see if things change, maybe something from 'outside' is keeping the machine alive. I was testing that way for a while, didn't show any improvement (then). See what shows up in the Event Log, if there is nothing to be found in the Event Log start investigating the Loaded Modules. By Loaded Modules, I assume you mean everything that shows in the Task Manager list, including about 15 executables that are not user-generated...... SvcHosts, for example. I don't think I'm up to doing that, but I have the other items above to look into. May I digress with an adaptation of a prayer? Lord, give me the strength to change what I can change. And the grace to accept what I cannot change. And the wisdom to know the difference between the two. Bill John |
Thread Tools | |
Display Modes | |
|
|