If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Rate Thread | Display Modes |
#1
|
|||
|
|||
Extra Recovery Partitions
Running Win10 Home x64 on a system I built, but using a HDD from a Lenovo
that is out of use. I used the same OS installation- it found and installed the drivers I needed for the new MB and CPU, and everything runs like nothing was changed. Opening Disk Management shows some extra partitions that I don't think I need, but am not sure which ones to keep, and which to delete. Here's a screen shot of DM: http://tinypic.com/m/ju7jfm/3 If I right-click on any partition other than the Boot one, my only option is "Help", which brings me to: https://docs.microsoft.com/en-us/windows-server/storage/disk-management/overview-of-disk-management#about-those-extra-recovery-partitions I'm willing to bet the OEM and the 30GB ones are from the Lenovo, but how do I tell, and how do I get rid of them if they are? Thanks! -- SC Tom |
Ads |
#2
|
|||
|
|||
Extra Recovery Partitions
SC Tom wrote:
Running Win10 Home x64 on a system I built, but using a HDD from a Lenovo that is out of use. I used the same OS installation- it found and installed the drivers I needed for the new MB and CPU, and everything runs like nothing was changed. Opening Disk Management shows some extra partitions that I don't think I need, but am not sure which ones to keep, and which to delete. Here's a screen shot of DM: http://tinypic.com/m/ju7jfm/3 If I right-click on any partition other than the Boot one, my only option is "Help", which brings me to: https://docs.microsoft.com/en-us/windows-server/storage/disk-management/overview-of-disk-management#about-those-extra-recovery-partitions I'm willing to bet the OEM and the 30GB ones are from the Lenovo, but how do I tell, and how do I get rid of them if they are? Thanks! Perhaps TestDisk can look inside. TestDisk is an acquired taste, because of the menu system. https://www.cgsecurity.org/wiki/TestDisk https://www.cgsecurity.org/wiki/TestDisk_Step_By_Step "Press p to list its files" Now what should happen, is even if the partition is a hidden type, you should be able to look at it. To look from Linux, requires doing stuff like changing the partition type from 0x27 to 0x07 to make the hidden NTFS visible, and then it depends on whether your $MFTMIRR is damaged as to whether the partition will mount. As a result, I'd have to go with TestDisk first. TestDisk is included on Linux. But is also available for Windows as a download. HTH, Paul |
#3
|
|||
|
|||
Extra Recovery Partitions
"SC Tom" wrote in news
Running Win10 Home x64 on a system I built, but using a HDD from a Lenovo that is out of use. I used the same OS installation- it found and installed the drivers I needed for the new MB and CPU, and everything runs like nothing was changed. Opening Disk Management shows some extra partitions that I don't think I need, but am not sure which ones to keep, and which to delete. Here's a screen shot of DM: http://tinypic.com/m/ju7jfm/3 If I right-click on any partition other than the Boot one, my only option is "Help", which brings me to: https://docs.microsoft.com/en-us/win...disk-managemen t/overview-of-disk-management#about-those-extra-recovery-partitions I'm willing to bet the OEM and the 30GB ones are from the Lenovo, but how do I tell, and how do I get rid of them if they are? Thanks! I was able to use Mini Tool Partition Wizard to explore the contents of the recovery partion on my system drive. |
#4
|
|||
|
|||
Extra Recovery Partitions
"Paul" wrote in message news SC Tom wrote: Running Win10 Home x64 on a system I built, but using a HDD from a Lenovo that is out of use. I used the same OS installation- it found and installed the drivers I needed for the new MB and CPU, and everything runs like nothing was changed. Opening Disk Management shows some extra partitions that I don't think I need, but am not sure which ones to keep, and which to delete. Here's a screen shot of DM: http://tinypic.com/m/ju7jfm/3 If I right-click on any partition other than the Boot one, my only option is "Help", which brings me to: https://docs.microsoft.com/en-us/windows-server/storage/disk-management/overview-of-disk-management#about-those-extra-recovery-partitions I'm willing to bet the OEM and the 30GB ones are from the Lenovo, but how do I tell, and how do I get rid of them if they are? Thanks! Perhaps TestDisk can look inside. TestDisk is an acquired taste, because of the menu system. https://www.cgsecurity.org/wiki/TestDisk https://www.cgsecurity.org/wiki/TestDisk_Step_By_Step "Press p to list its files" Now what should happen, is even if the partition is a hidden type, you should be able to look at it. To look from Linux, requires doing stuff like changing the partition type from 0x27 to 0x07 to make the hidden NTFS visible, and then it depends on whether your $MFTMIRR is damaged as to whether the partition will mount. As a result, I'd have to go with TestDisk first. TestDisk is included on Linux. But is also available for Windows as a download. Yikes, way over my head :-( I don't get the "Press 'P' to list its files" anywhere that I can see. I think I'll try the MiniTool Partition Wizard that Tim suggested :-) -- SC Tom |
#5
|
|||
|
|||
Extra Recovery Partitions
"Tim" wrote in message . 28... "SC Tom" wrote in news Running Win10 Home x64 on a system I built, but using a HDD from a Lenovo that is out of use. I used the same OS installation- it found and installed the drivers I needed for the new MB and CPU, and everything runs like nothing was changed. Opening Disk Management shows some extra partitions that I don't think I need, but am not sure which ones to keep, and which to delete. Here's a screen shot of DM: http://tinypic.com/m/ju7jfm/3 If I right-click on any partition other than the Boot one, my only option is "Help", which brings me to: https://docs.microsoft.com/en-us/win...disk-managemen t/overview-of-disk-management#about-those-extra-recovery-partitions I'm willing to bet the OEM and the 30GB ones are from the Lenovo, but how do I tell, and how do I get rid of them if they are? Thanks! I was able to use Mini Tool Partition Wizard to explore the contents of the recovery partion on my system drive. Thanks, that's just what I needed! The 500MB partition is labeled LRS_ESP, which seems to be the Lenovo EFI System Partion, according to googling. The 30GB one is labeled LENOVO_PART, and contains old files that I believe would be to recover back to factory state using the OneKey boot-up, if it was still in the Lenovo PC. I think I'll blow both of them away, but not before I create a disk image :-) Thanks again for your help! -- SC Tom |
#6
|
|||
|
|||
Extra Recovery Partitions
SC Tom wrote:
"Tim" wrote in message . 28... "SC Tom" wrote in news Running Win10 Home x64 on a system I built, but using a HDD from a Lenovo that is out of use. I used the same OS installation- it found and installed the drivers I needed for the new MB and CPU, and everything runs like nothing was changed. Opening Disk Management shows some extra partitions that I don't think I need, but am not sure which ones to keep, and which to delete. Here's a screen shot of DM: http://tinypic.com/m/ju7jfm/3 If I right-click on any partition other than the Boot one, my only option is "Help", which brings me to: https://docs.microsoft.com/en-us/win...disk-managemen t/overview-of-disk-management#about-those-extra-recovery-partitions I'm willing to bet the OEM and the 30GB ones are from the Lenovo, but how do I tell, and how do I get rid of them if they are? Thanks! I was able to use Mini Tool Partition Wizard to explore the contents of the recovery partion on my system drive. Thanks, that's just what I needed! The 500MB partition is labeled LRS_ESP, which seems to be the Lenovo EFI System Partion, according to googling. The 30GB one is labeled LENOVO_PART, and contains old files that I believe would be to recover back to factory state using the OneKey boot-up, if it was still in the Lenovo PC. I think I'll blow both of them away, but not before I create a disk image :-) Thanks again for your help! So what's in an EFI partition exactly ? Does it have a .wim file ? Or does it have just a few .efi files ? I can never keep track of why there are so many "emergency this and that" things in these installs. The 30GB might be safer to toss. And is there an Active flag in there somewhere ? You'd probably want to preserve whatever partition has the Active flag. That's if there is one. Paul |
#7
|
|||
|
|||
Extra Recovery Partitions
On Mon, 16 Apr 2018 16:17:03 GMT, Tim wrote:
| "SC Tom" wrote in news | | Running Win10 Home x64 on a system I built, but using a HDD from a | Lenovo that is out of use. I used the same OS installation- it found | and installed the drivers I needed for the new MB and CPU, and | everything runs like nothing was changed. | Opening Disk Management shows some extra partitions that I don't think | I need, but am not sure which ones to keep, and which to delete. | Here's a screen shot of DM: | | http://tinypic.com/m/ju7jfm/3 | | If I right-click on any partition other than the Boot one, my only | option is "Help", which brings me to: | | https://docs.microsoft.com/en-us/win...disk-managemen | t/overview-of-disk-management#about-those-extra-recovery-partitions | | I'm willing to bet the OEM and the 30GB ones are from the Lenovo, but | how do I tell, and how do I get rid of them if they are? | | Thanks! | | I was able to use Mini Tool Partition Wizard to explore the contents of the | recovery partion on my system drive. My main drive has a 100 MB UEFI partition, a 16 MB MSR partition and then C: (system partition). Nothing more. I always have fresh Macrium Reflect backups and Windows installation media, so have no need for any recovery partition. Each Windows 10 spring and fall update steals 450 MB at the end of C and creates a recovery partition, but I delete it and merge that space back into C. Larc |
#8
|
|||
|
|||
Extra Recovery Partitions
"SC Tom" wrote in news
Yikes, way over my head :-( I don't get the "Press 'P' to list its files" anywhere that I can see. I think I'll try the MiniTool Partition Wizard that Tim suggested :-) This popped up from HowToGeek today. Instead of doing 'remove' to remove the drive letter, there should be an equivalent command to add a drive letter. Just be very careful that you have the correct volume selected or you can really mess things up. https://www.howtogeek.com/348168/how...tion-or-other- drive-in-windows/ |
#9
|
|||
|
|||
Extra Recovery Partitions
On 16/04/2018 13:46, SC Tom wrote:
If I right-click on any partition other than the Boot one, my only option is "Help", which brings me to: Just click on the partition and then press "DEL" button and the partition will be deleted. Do it on both partition and let Windows recreate the one that is required. You have the disk image so why not try it. In fact, if you have Digital License (Legal and not some pirated version which Mike is selling on eBay) then reformat the HD, delete the partitions and start again. In future please refrain from cross-posting to useless newsgroups; Just stick to one newsgroups where you are likely to get well researched response. In your case " alt.comp.hardware.pc-homebuilt" more suitable considering your low IQ. /--- This email has been checked for viruses by Windows Defender software. //https://www.microsoft.com/en-gb/windows/comprehensive-security/ -- With over 600 million devices now running Windows 10, customer satisfaction is higher than any previous version of windows. |
#10
|
|||
|
|||
Extra Recovery Partitions
Larc wrote:
My main drive has a 100 MB UEFI partition, a 16 MB MSR partition and then C: (system partition). Nothing more. I always have fresh Macrium Reflect backups and Windows installation media, so have no need for any recovery partition. Each Windows 10 spring and fall update steals 450 MB at the end of C and creates a recovery partition, but I delete it and merge that space back into C. The 16MB MSR partition indicates GPT instead of an MBR partition type Fyi...The 100 MB UEFI partition is the *System* partition(aka Volume) that holds the bootloader files. The C: partition is the Boot Partition(aka Volume) that holds the operating system. The nomenclature can be confusing naming the o/s the Boot Volume(Partition). The easiest way to rationalize the two - System Partition handshakes with the motherboard, loads the bootloader files, boots the device then passes control to the Boot Volume to load Windows. -- ....w¡ñ§±¤ñ msft mvp 2007-2016, insider mvp 2016-2018 |
#11
|
|||
|
|||
Extra Recovery Partitions
SC Tom wrote:
"Tim" wrote in message . 28... "SC Tom" wrote in news Running Win10 Home x64 on a system I built, but using a HDD from a Lenovo that is out of use. I used the same OS installation- it found and installed the drivers I needed for the new MB and CPU, and everything runs like nothing was changed. Opening Disk Management shows some extra partitions that I don't think I need, but am not sure which ones to keep, and which to delete. Here's a screen shot of DM: http://tinypic.com/m/ju7jfm/3 If I right-click on any partition other than the Boot one, my only option is "Help", which brings me to: https://docs.microsoft.com/en-us/win...disk-managemen t/overview-of-disk-management#about-those-extra-recovery-partitions I'm willing to bet the OEM and the 30GB ones are from the Lenovo, but how do I tell, and how do I get rid of them if they are? Thanks! I was able to use Mini Tool Partition Wizard to explore the contents of the recovery partion on my system drive. Thanks, that's just what I needed! The 500MB partition is labeled LRS_ESP, which seems to be the Lenovo EFI System Partion, according to googling. The 30GB one is labeled LENOVO_PART, and contains old files that I believe would be to recover back to factory state using the OneKey boot-up, if it was still in the Lenovo PC. I think I'll blow both of them away, but not before I create a disk image :-) Thanks again for your help! Two cents. May or may not be applicable. Since you've two Win10 installs on the device with one common System Volume(boot loader files) are you certain that one of the Recovery partitions is not the required Recovery partition for the second installation of Win10. -- ....w¡ñ§±¤ñ msft mvp 2007-2016, insider mvp 2016-2018 |
#12
|
|||
|
|||
Extra Recovery Partitions
"Paul" wrote in message news SC Tom wrote: "Tim" wrote in message . 28... "SC Tom" wrote in news Running Win10 Home x64 on a system I built, but using a HDD from a Lenovo that is out of use. I used the same OS installation- it found and installed the drivers I needed for the new MB and CPU, and everything runs like nothing was changed. Opening Disk Management shows some extra partitions that I don't think I need, but am not sure which ones to keep, and which to delete. Here's a screen shot of DM: http://tinypic.com/m/ju7jfm/3 If I right-click on any partition other than the Boot one, my only option is "Help", which brings me to: https://docs.microsoft.com/en-us/win...disk-managemen t/overview-of-disk-management#about-those-extra-recovery-partitions I'm willing to bet the OEM and the 30GB ones are from the Lenovo, but how do I tell, and how do I get rid of them if they are? Thanks! I was able to use Mini Tool Partition Wizard to explore the contents of the recovery partion on my system drive. Thanks, that's just what I needed! The 500MB partition is labeled LRS_ESP, which seems to be the Lenovo EFI System Partion, according to googling. The 30GB one is labeled LENOVO_PART, and contains old files that I believe would be to recover back to factory state using the OneKey boot-up, if it was still in the Lenovo PC. I think I'll blow both of them away, but not before I create a disk image :-) Thanks again for your help! So what's in an EFI partition exactly ? Does it have a .wim file ? Or does it have just a few .efi files ? I can never keep track of why there are so many "emergency this and that" things in these installs. The 30GB might be safer to toss. And is there an Active flag in there somewhere ? You'd probably want to preserve whatever partition has the Active flag. That's if there is one. Paul It had a.wim and a WinRE folder and a few Lenovo related files. My guess it was the start folder when one pressed the F12 key on boot-up and restored to factory (which, in this case, WAS Win8). The 30GB partition had the reinstallation files and the drivers to go with it. Got rid of both and merged them with my C: partition. Boots just fine :-) -- SC Tom |
#13
|
|||
|
|||
Extra Recovery Partitions
"...w¡ñ§±¤ñ" wrote in message news SC Tom wrote: "Tim" wrote in message . 28... "SC Tom" wrote in news Running Win10 Home x64 on a system I built, but using a HDD from a Lenovo that is out of use. I used the same OS installation- it found and installed the drivers I needed for the new MB and CPU, and everything runs like nothing was changed. Opening Disk Management shows some extra partitions that I don't think I need, but am not sure which ones to keep, and which to delete. Here's a screen shot of DM: http://tinypic.com/m/ju7jfm/3 If I right-click on any partition other than the Boot one, my only option is "Help", which brings me to: https://docs.microsoft.com/en-us/win...disk-managemen t/overview-of-disk-management#about-those-extra-recovery-partitions I'm willing to bet the OEM and the 30GB ones are from the Lenovo, but how do I tell, and how do I get rid of them if they are? Thanks! I was able to use Mini Tool Partition Wizard to explore the contents of the recovery partion on my system drive. Thanks, that's just what I needed! The 500MB partition is labeled LRS_ESP, which seems to be the Lenovo EFI System Partion, according to googling. The 30GB one is labeled LENOVO_PART, and contains old files that I believe would be to recover back to factory state using the OneKey boot-up, if it was still in the Lenovo PC. I think I'll blow both of them away, but not before I create a disk image :-) Thanks again for your help! Two cents. May or may not be applicable. Since you've two Win10 installs on the device with one common System Volume(boot loader files) are you certain that one of the Recovery partitions is not the required Recovery partition for the second installation of Win10. There's only 1 installation of Win10. The drives are labeled as Win10_1 and Win10_2 instead of something like "Windows" and "Other_crap" :-) -- SC Tom |
Thread Tools | |
Display Modes | Rate This Thread |
|
|