If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Home network problem
I have a network set up with 2 pc's running xp home sp3 and a linksys router.
The issue I am having is the main pc I use does not show anything in "my network places", the second pc has it's shared folder and the pc in the work group but doesnt show anything for pc1. I re-ran the network setup wizard but that didnt help. After reading other posts here I have tried using browstat status command but it just returns a command promp and no info. I reset the winsock and did a malware scan but nothing was found. I had this error in the event log: Event Type: Error Event Source: NetBT Event Category: None Event ID: 4311 Date: 1/2/2010 Time: 10:17:45 AM User: N/A Computer: BLACKFROG Description: Initialization failed because the driver device could not be created. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 00 00 00 00 01 00 58 00 ......X. 0008: 00 00 00 00 d7 10 00 c0 ....×..À 0010: 11 01 00 00 3b 00 00 c0 ....;..À 0018: 02 00 00 00 00 00 00 00 ........ 0020: 00 00 00 00 00 00 00 00 ........ I followed instructions and checked the registry keys and did what was suggested to fix it. Restarted the pc but still dont have anything in the network. |
Ads |
#2
|
|||
|
|||
Home network problem
Hi
make sure that you have a valid Network installed correctly. Maybe this can Help, http://www.ezlan.net/debug.html Jack (MS, MVP-Networking). "tdmafort" wrote in message ... I have a network set up with 2 pc's running xp home sp3 and a linksys router. The issue I am having is the main pc I use does not show anything in "my network places", the second pc has it's shared folder and the pc in the work group but doesnt show anything for pc1. I re-ran the network setup wizard but that didnt help. After reading other posts here I have tried using browstat status command but it just returns a command promp and no info. I reset the winsock and did a malware scan but nothing was found. I had this error in the event log: Event Type: Error Event Source: NetBT Event Category: None Event ID: 4311 Date: 1/2/2010 Time: 10:17:45 AM User: N/A Computer: BLACKFROG Description: Initialization failed because the driver device could not be created. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 00 00 00 00 01 00 58 00 ......X. 0008: 00 00 00 00 d7 10 00 c0 ....×..À 0010: 11 01 00 00 3b 00 00 c0 ....;..À 0018: 02 00 00 00 00 00 00 00 ........ 0020: 00 00 00 00 00 00 00 00 ........ I followed instructions and checked the registry keys and did what was suggested to fix it. Restarted the pc but still dont have anything in the network. |
#3
|
|||
|
|||
Home network problem
Hi
make sure that you have a valid Network installed correctly. Maybe this can Help, http://www.ezlan.net/debug.html Jack (MS, MVP-Networking). "tdmafort" wrote in message ... I have a network set up with 2 pc's running xp home sp3 and a linksys router. The issue I am having is the main pc I use does not show anything in "my network places", the second pc has it's shared folder and the pc in the work group but doesnt show anything for pc1. I re-ran the network setup wizard but that didnt help. After reading other posts here I have tried using browstat status command but it just returns a command promp and no info. I reset the winsock and did a malware scan but nothing was found. I had this error in the event log: Event Type: Error Event Source: NetBT Event Category: None Event ID: 4311 Date: 1/2/2010 Time: 10:17:45 AM User: N/A Computer: BLACKFROG Description: Initialization failed because the driver device could not be created. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 00 00 00 00 01 00 58 00 ......X. 0008: 00 00 00 00 d7 10 00 c0 ....×..À 0010: 11 01 00 00 3b 00 00 c0 ....;..À 0018: 02 00 00 00 00 00 00 00 ........ 0020: 00 00 00 00 00 00 00 00 ........ I followed instructions and checked the registry keys and did what was suggested to fix it. Restarted the pc but still dont have anything in the network. |
#4
|
|||
|
|||
Home network problem
Thank you Jack,
Apparently I didnt fix the winsock but the link you provided had a program that fixed it and now it works. Again, thank you. "Jack [MVP-Networking]" wrote: Hi make sure that you have a valid Network installed correctly. Maybe this can Help, http://www.ezlan.net/debug.html Jack (MS, MVP-Networking). "tdmafort" wrote in message ... I have a network set up with 2 pc's running xp home sp3 and a linksys router. The issue I am having is the main pc I use does not show anything in "my network places", the second pc has it's shared folder and the pc in the work group but doesnt show anything for pc1. I re-ran the network setup wizard but that didnt help. After reading other posts here I have tried using browstat status command but it just returns a command promp and no info. I reset the winsock and did a malware scan but nothing was found. I had this error in the event log: Event Type: Error Event Source: NetBT Event Category: None Event ID: 4311 Date: 1/2/2010 Time: 10:17:45 AM User: N/A Computer: BLACKFROG Description: Initialization failed because the driver device could not be created. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 00 00 00 00 01 00 58 00 ......X. 0008: 00 00 00 00 d7 10 00 c0 ....×..À 0010: 11 01 00 00 3b 00 00 c0 ....;..À 0018: 02 00 00 00 00 00 00 00 ........ 0020: 00 00 00 00 00 00 00 00 ........ I followed instructions and checked the registry keys and did what was suggested to fix it. Restarted the pc but still dont have anything in the network. . |
#5
|
|||
|
|||
Home network problem
Thank you Jack,
Apparently I didnt fix the winsock but the link you provided had a program that fixed it and now it works. Again, thank you. "Jack [MVP-Networking]" wrote: Hi make sure that you have a valid Network installed correctly. Maybe this can Help, http://www.ezlan.net/debug.html Jack (MS, MVP-Networking). "tdmafort" wrote in message ... I have a network set up with 2 pc's running xp home sp3 and a linksys router. The issue I am having is the main pc I use does not show anything in "my network places", the second pc has it's shared folder and the pc in the work group but doesnt show anything for pc1. I re-ran the network setup wizard but that didnt help. After reading other posts here I have tried using browstat status command but it just returns a command promp and no info. I reset the winsock and did a malware scan but nothing was found. I had this error in the event log: Event Type: Error Event Source: NetBT Event Category: None Event ID: 4311 Date: 1/2/2010 Time: 10:17:45 AM User: N/A Computer: BLACKFROG Description: Initialization failed because the driver device could not be created. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 00 00 00 00 01 00 58 00 ......X. 0008: 00 00 00 00 d7 10 00 c0 ....×..À 0010: 11 01 00 00 3b 00 00 c0 ....;..À 0018: 02 00 00 00 00 00 00 00 ........ 0020: 00 00 00 00 00 00 00 00 ........ I followed instructions and checked the registry keys and did what was suggested to fix it. Restarted the pc but still dont have anything in the network. . |
Thread Tools | |
Display Modes | |
|
|