If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Rate Thread | Display Modes |
#1
|
|||
|
|||
Win7 Repair disk and Image
Where does the repair data for that come from when I have no
installation disks? if it comes from a partition then it cannot find the partition. i see a small partition that looks right but repair feature can't find it. So how do I create the disk other than using the Win 7 feature that will not work? I also wanted to put a system image on a network drive, My NAS. But Win 7 said no because I could not enter a user name and a password. I do not have or use that with my NAS. So how do i do that? --- news://freenews.netfront.net/ - complaints: --- |
Ads |
#2
|
|||
|
|||
Win7 Repair disk and Image
OldGuy wrote:
Where does the repair data for that come from when I have no installation disks? if it comes from a partition then it cannot find the partition. i see a small partition that looks right but repair feature can't find it. So how do I create the disk other than using the Win 7 feature that will not work? I also wanted to put a system image on a network drive, My NAS. But Win 7 said no because I could not enter a user name and a password. I do not have or use that with my NAS. So how do i do that? Generally, there is a copy of the contents of C:, hiding in a factory restore partition. When the laptop prompts you to "burn DVDs" on the first day, that's where the 3 DVD set comes from, from that partition. You check the user manual, to see if additional features are supported. Older computers, they only had a "nuke" option, which returned the unit to factory conditions. Newer machines, may offer more light-weight (keep your files) type options. ******* If you want to do a repair install, on Windows 7 that's called an "in-place upgrade". As Philo pointed out the other day, you can't actually do that by booting a Windows 7 DVD. You insert the DVD while Windows is running, and run the setup.exe on the DVD from there. That is a significant limitation compared to WinXP, where you could have a "dead C:" situation, boot from the WinXP CD, and fix it up. The details are documented here. http://www.sevenforums.com/tutorials...r-install.html There is a link in that article. It points to the "digitalriver" copies of Windows 7. I got a Windows 7 SP1 x64 Home Premium disc that way, and I have already used it, to blow away the Acer version of Windows 7 x64 OEM Home Premium. That removes cruft, like the games that came with the laptop. (I did a Clean Install, rather than a In-Place Upgrade, so in my case, I would have booted from the resulting DVD. I kept my original C: around, hidden, for emergencies. The DVD could not "see" my original C: partition, when I did the Clean Install. I used the license key off the laptop COA, for the installation. Windows 8 laptops don't have a COA, and that's yet another situation.) http://www.heidoc.net/joomla/technol...download-links "Windows 7 Home Premium x64 SP1 (old) X17-24209.iso" By searching on one of the iso names, like that one, you can find other web sites with the lists as well. DigitalRiver sells the software, but the download servers are left open, and OEM laptop owners can grab a copy. If you look around, you may even find a MD5 or SHA1 checksum to use, to verify the DVD has not been modified by someone. Some day, when DigitalRiver is shut down, and people are torrenting these discs, you'll need the checksum for safety. You would not use your new 3.5GB DVD, if the checksum was wrong - the disc could have been modified. And an invalid checksum, doesn't tell you if the mods are good or bad ones. The DigitalRiver servers will not remain open forever, so get your copy *now*. Paul |
Thread Tools | |
Display Modes | Rate This Thread |
|
|