If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
DOS printing still broke
Yes, I checked out his site. It is a locally connected printer, via
plain old lpt1. As he says, I should have to do nothing. It should just work (as it has for years). Nothing to pool, just one printer connected to the computer, so can't do the second approach. Local, not networked, so "Net use lpt1 ..." does not work--even tried it == goofy results. Sooo, tried upgrading the printer driver. Did not work. Deleted printer from Printers and Faxes folder. While trying to reinstall, Windows "Found new hardware" and setup the driver right away. Still does not work. Also, I cannot print from either cmd prompt or command.com prompt by copying to printer. I.e., "copy filename.txt prn". On another WinXP machine this does work. So I don't think it is simply a problem with the DOS ap. It is a problem with Windows itself. So I'm baffled. Where to go from here? David F. "Cari (MS-MVP)" wrote in message ... Have you gone through Bruce Sanderson's page http://members.shaw.ca/bsanders/printfromdos.htm Cari www.coribright.com "David Frohmader" wrote in message ... Printing from a DOS ap just quit working. Windows aps print fine. I tried to copy a text file to the printer from a command prompt, i.e., "copy textfile.txt prn" Nothing happened, nothing spooled. I had the printer folder open to see if anything qued. Possibly some kind of DOS printing sub-system broke? Please advise. Thanks, David |
Ads |
#2
|
|||
|
|||
DOS printing still broke
What is the LPT setting in the BIOS?
Cari www.coribright.com "David F" wrote in message news:fTgYb.334289$xy6.1667133@attbi_s02... Yes, I checked out his site. It is a locally connected printer, via plain old lpt1. As he says, I should have to do nothing. It should just work (as it has for years). Nothing to pool, just one printer connected to the computer, so can't do the second approach. Local, not networked, so "Net use lpt1 ..." does not work--even tried it == goofy results. Sooo, tried upgrading the printer driver. Did not work. Deleted printer from Printers and Faxes folder. While trying to reinstall, Windows "Found new hardware" and setup the driver right away. Still does not work. Also, I cannot print from either cmd prompt or command.com prompt by copying to printer. I.e., "copy filename.txt prn". On another WinXP machine this does work. So I don't think it is simply a problem with the DOS ap. It is a problem with Windows itself. So I'm baffled. Where to go from here? David F. "Cari (MS-MVP)" wrote in message ... Have you gone through Bruce Sanderson's page http://members.shaw.ca/bsanders/printfromdos.htm Cari www.coribright.com "David Frohmader" wrote in message ... Printing from a DOS ap just quit working. Windows aps print fine. I tried to copy a text file to the printer from a command prompt, i.e., "copy textfile.txt prn" Nothing happened, nothing spooled. I had the printer folder open to see if anything qued. Possibly some kind of DOS printing sub-system broke? Please advise. Thanks, David |
#3
|
|||
|
|||
DOS printing still broke
David,
Yes, I checked out his site. It is a locally connected printer, via plain old lpt1. As he says, I should have to do nothing. ... So I'm baffled. Where to go from here? Printfil can solve your problem (but it is a commercial software). Regards, Davide (Guolo - Printfil author) --------------------------------------------------- Printfil - Windows Printing System for Applications http://www.guolo.com/printfil --------------------------------------------------- |
#4
|
|||
|
|||
DOS printing still broke
Computer management/Device Manager/Ports/ECP Printer Port(LPT1):
General tab: Enabled Port settings tab: Never use an interupt is checked; Enable legacy plug and play detection--Not checked; LPT port number: LPT1 Driver tab: version 5.1.2600.0 Dig sign: MS WinWP Publisher Resources tab: I/O range: 0378-037F; I/O range: 0778-077F Thanks, David "Cari (MS-MVP)" wrote in message ... What is the LPT setting in the BIOS? Cari www.coribright.com "David F" wrote in message news:fTgYb.334289$xy6.1667133@attbi_s02... Yes, I checked out his site. It is a locally connected printer, via plain old lpt1. As he says, I should have to do nothing. It should just work (as it has for years). Nothing to pool, just one printer connected to the computer, so can't do the second approach. Local, not networked, so "Net use lpt1 ..." does not work--even tried it == goofy results. Sooo, tried upgrading the printer driver. Did not work. Deleted printer from Printers and Faxes folder. While trying to reinstall, Windows "Found new hardware" and setup the driver right away. Still does not work. Also, I cannot print from either cmd prompt or command.com prompt by copying to printer. I.e., "copy filename.txt prn". On another WinXP machine this does work. So I don't think it is simply a problem with the DOS ap. It is a problem with Windows itself. So I'm baffled. Where to go from here? David F. "Cari (MS-MVP)" wrote in message ... Have you gone through Bruce Sanderson's page http://members.shaw.ca/bsanders/printfromdos.htm Cari www.coribright.com "David Frohmader" wrote in message ... Printing from a DOS ap just quit working. Windows aps print fine. I tried to copy a text file to the printer from a command prompt, i.e., "copy textfile.txt prn" Nothing happened, nothing spooled. I had the printer folder open to see if anything qued. Possibly some kind of DOS printing sub-system broke? Please advise. Thanks, David |
#5
|
|||
|
|||
DOS printing still broke
The settings are identical to a Win2K Pro box in another office. It prints the
same ap just fine. It seems something is broken under the hood. There must be a way to remove and replace the components of the driver, unless it is a registry issue. Maybe it takes an expensive call to MS? David F. "Cari (MS-MVP)" wrote in message ... What is the LPT setting in the BIOS? Cari www.coribright.com "David F" wrote in message news:fTgYb.334289$xy6.1667133@attbi_s02... Yes, I checked out his site. It is a locally connected printer, via plain old lpt1. As he says, I should have to do nothing. It should just work (as it has for years). Nothing to pool, just one printer connected to the computer, so can't do the second approach. Local, not networked, so "Net use lpt1 ..." does not work--even tried it == goofy results. Sooo, tried upgrading the printer driver. Did not work. Deleted printer from Printers and Faxes folder. While trying to reinstall, Windows "Found new hardware" and setup the driver right away. Still does not work. Also, I cannot print from either cmd prompt or command.com prompt by copying to printer. I.e., "copy filename.txt prn". On another WinXP machine this does work. So I don't think it is simply a problem with the DOS ap. It is a problem with Windows itself. So I'm baffled. Where to go from here? David F. "Cari (MS-MVP)" wrote in message ... Have you gone through Bruce Sanderson's page http://members.shaw.ca/bsanders/printfromdos.htm Cari www.coribright.com "David Frohmader" wrote in message ... Printing from a DOS ap just quit working. Windows aps print fine. I tried to copy a text file to the printer from a command prompt, i.e., "copy textfile.txt prn" Nothing happened, nothing spooled. I had the printer folder open to see if anything qued. Possibly some kind of DOS printing sub-system broke? Please advise. Thanks, David |
#6
|
|||
|
|||
DOS printing still broke
You need to check the LPT setting in the BIOS! Read your PC manual for
details of how to enter the BIOS on your particular PC. It's a keypress on startup, but exactly which key to press varies from PC to PC. Cari www.coribright.com "David Frohmader" wrote in message ... Computer management/Device Manager/Ports/ECP Printer Port(LPT1): General tab: Enabled Port settings tab: Never use an interupt is checked; Enable legacy plug and play detection--Not checked; LPT port number: LPT1 Driver tab: version 5.1.2600.0 Dig sign: MS WinWP Publisher Resources tab: I/O range: 0378-037F; I/O range: 0778-077F Thanks, David "Cari (MS-MVP)" wrote in message ... What is the LPT setting in the BIOS? Cari www.coribright.com "David F" wrote in message news:fTgYb.334289$xy6.1667133@attbi_s02... Yes, I checked out his site. It is a locally connected printer, via plain old lpt1. As he says, I should have to do nothing. It should just work (as it has for years). Nothing to pool, just one printer connected to the computer, so can't do the second approach. Local, not networked, so "Net use lpt1 ..." does not work--even tried it == goofy results. Sooo, tried upgrading the printer driver. Did not work. Deleted printer from Printers and Faxes folder. While trying to reinstall, Windows "Found new hardware" and setup the driver right away. Still does not work. Also, I cannot print from either cmd prompt or command.com prompt by copying to printer. I.e., "copy filename.txt prn". On another WinXP machine this does work. So I don't think it is simply a problem with the DOS ap. It is a problem with Windows itself. So I'm baffled. Where to go from here? David F. "Cari (MS-MVP)" wrote in message ... Have you gone through Bruce Sanderson's page http://members.shaw.ca/bsanders/printfromdos.htm Cari www.coribright.com "David Frohmader" wrote in message ... Printing from a DOS ap just quit working. Windows aps print fine. I tried to copy a text file to the printer from a command prompt, i.e., "copy textfile.txt prn" Nothing happened, nothing spooled. I had the printer folder open to see if anything qued. Possibly some kind of DOS printing sub-system broke? Please advise. Thanks, David |
#7
|
|||
|
|||
DOS printing still broke
Duh! In the BIOS, yeah, right... (Dell Optiplex, press F2 at boot)
Mode: PS/2 I/O address: 378h Changed it, then back again, saved, booted, tried to print again = same results: Nothing prints Booted from a floppy disk to DOS 5, copied a file to printer: "Copy 'filename.ext' prn" = it printed, so its not a hardware or BIOS issue Can't do that from either a command.com or cmd.exe prompt Thanks, Still hoping to avoid an OS reinstall David "Cari (MS-MVP)" wrote in message ... You need to check the LPT setting in the BIOS! Read your PC manual for details of how to enter the BIOS on your particular PC. It's a keypress on startup, but exactly which key to press varies from PC to PC. Cari www.coribright.com "David Frohmader" wrote in message ... Computer management/Device Manager/Ports/ECP Printer Port(LPT1): General tab: Enabled Port settings tab: Never use an interupt is checked; Enable legacy plug and play detection--Not checked; LPT port number: LPT1 Driver tab: version 5.1.2600.0 Dig sign: MS WinWP Publisher Resources tab: I/O range: 0378-037F; I/O range: 0778-077F Thanks, David "Cari (MS-MVP)" wrote in message ... What is the LPT setting in the BIOS? Cari www.coribright.com "David F" wrote in message news:fTgYb.334289$xy6.1667133@attbi_s02... Yes, I checked out his site. It is a locally connected printer, via plain old lpt1. As he says, I should have to do nothing. It should just work (as it has for years). Nothing to pool, just one printer connected to the computer, so can't do the second approach. Local, not networked, so "Net use lpt1 ..." does not work--even tried it == goofy results. Sooo, tried upgrading the printer driver. Did not work. Deleted printer from Printers and Faxes folder. While trying to reinstall, Windows "Found new hardware" and setup the driver right away. Still does not work. Also, I cannot print from either cmd prompt or command.com prompt by copying to printer. I.e., "copy filename.txt prn". On another WinXP machine this does work. So I don't think it is simply a problem with the DOS ap. It is a problem with Windows itself. So I'm baffled. Where to go from here? David F. "Cari (MS-MVP)" wrote in message ... Have you gone through Bruce Sanderson's page http://members.shaw.ca/bsanders/printfromdos.htm Cari www.coribright.com "David Frohmader" wrote in message ... Printing from a DOS ap just quit working. Windows aps print fine. I tried to copy a text file to the printer from a command prompt, i.e., "copy textfile.txt prn" Nothing happened, nothing spooled. I had the printer folder open to see if anything qued. Possibly some kind of DOS printing sub-system broke? Please advise. Thanks, David |
#8
|
|||
|
|||
DOS printing still broke
PS/2.... er, that's normally a mouse port.
Not LPT? Cari www.coribright.com "David Frohmader" wrote in message ... Duh! In the BIOS, yeah, right... (Dell Optiplex, press F2 at boot) Mode: PS/2 I/O address: 378h Changed it, then back again, saved, booted, tried to print again = same results: Nothing prints Booted from a floppy disk to DOS 5, copied a file to printer: "Copy 'filename.ext' prn" = it printed, so its not a hardware or BIOS issue Can't do that from either a command.com or cmd.exe prompt Thanks, Still hoping to avoid an OS reinstall David "Cari (MS-MVP)" wrote in message ... You need to check the LPT setting in the BIOS! Read your PC manual for details of how to enter the BIOS on your particular PC. It's a keypress on startup, but exactly which key to press varies from PC to PC. Cari www.coribright.com "David Frohmader" wrote in message ... Computer management/Device Manager/Ports/ECP Printer Port(LPT1): General tab: Enabled Port settings tab: Never use an interupt is checked; Enable legacy plug and play detection--Not checked; LPT port number: LPT1 Driver tab: version 5.1.2600.0 Dig sign: MS WinWP Publisher Resources tab: I/O range: 0378-037F; I/O range: 0778-077F Thanks, David "Cari (MS-MVP)" wrote in message ... What is the LPT setting in the BIOS? Cari www.coribright.com "David F" wrote in message news:fTgYb.334289$xy6.1667133@attbi_s02... Yes, I checked out his site. It is a locally connected printer, via plain old lpt1. As he says, I should have to do nothing. It should just work (as it has for years). Nothing to pool, just one printer connected to the computer, so can't do the second approach. Local, not networked, so "Net use lpt1 ..." does not work--even tried it == goofy results. Sooo, tried upgrading the printer driver. Did not work. Deleted printer from Printers and Faxes folder. While trying to reinstall, Windows "Found new hardware" and setup the driver right away. Still does not work. Also, I cannot print from either cmd prompt or command.com prompt by copying to printer. I.e., "copy filename.txt prn". On another WinXP machine this does work. So I don't think it is simply a problem with the DOS ap. It is a problem with Windows itself. So I'm baffled. Where to go from here? David F. "Cari (MS-MVP)" wrote in message ... Have you gone through Bruce Sanderson's page http://members.shaw.ca/bsanders/printfromdos.htm Cari www.coribright.com "David Frohmader" wrote in message ... Printing from a DOS ap just quit working. Windows aps print fine. I tried to copy a text file to the printer from a command prompt, i.e., "copy textfile.txt prn" Nothing happened, nothing spooled. I had the printer folder open to see if anything qued. Possibly some kind of DOS printing sub-system broke? Please advise. Thanks, David |
#9
|
|||
|
|||
DOS printing still broke
PS/2.... er, that's normally a mouse port.
Not LPT? Cari www.coribright.com "David Frohmader" wrote in message ... Duh! In the BIOS, yeah, right... (Dell Optiplex, press F2 at boot) Mode: PS/2 I/O address: 378h Changed it, then back again, saved, booted, tried to print again = same results: Nothing prints Booted from a floppy disk to DOS 5, copied a file to printer: "Copy 'filename.ext' prn" = it printed, so its not a hardware or BIOS issue Can't do that from either a command.com or cmd.exe prompt Thanks, Still hoping to avoid an OS reinstall David "Cari (MS-MVP)" wrote in message ... You need to check the LPT setting in the BIOS! Read your PC manual for details of how to enter the BIOS on your particular PC. It's a keypress on startup, but exactly which key to press varies from PC to PC. Cari www.coribright.com "David Frohmader" wrote in message ... Computer management/Device Manager/Ports/ECP Printer Port(LPT1): General tab: Enabled Port settings tab: Never use an interupt is checked; Enable legacy plug and play detection--Not checked; LPT port number: LPT1 Driver tab: version 5.1.2600.0 Dig sign: MS WinWP Publisher Resources tab: I/O range: 0378-037F; I/O range: 0778-077F Thanks, David "Cari (MS-MVP)" wrote in message ... What is the LPT setting in the BIOS? Cari www.coribright.com "David F" wrote in message news:fTgYb.334289$xy6.1667133@attbi_s02... Yes, I checked out his site. It is a locally connected printer, via plain old lpt1. As he says, I should have to do nothing. It should just work (as it has for years). Nothing to pool, just one printer connected to the computer, so can't do the second approach. Local, not networked, so "Net use lpt1 ..." does not work--even tried it == goofy results. Sooo, tried upgrading the printer driver. Did not work. Deleted printer from Printers and Faxes folder. While trying to reinstall, Windows "Found new hardware" and setup the driver right away. Still does not work. Also, I cannot print from either cmd prompt or command.com prompt by copying to printer. I.e., "copy filename.txt prn". On another WinXP machine this does work. So I don't think it is simply a problem with the DOS ap. It is a problem with Windows itself. So I'm baffled. Where to go from here? David F. "Cari (MS-MVP)" wrote in message ... Have you gone through Bruce Sanderson's page http://members.shaw.ca/bsanders/printfromdos.htm Cari www.coribright.com "David Frohmader" wrote in message ... Printing from a DOS ap just quit working. Windows aps print fine. I tried to copy a text file to the printer from a command prompt, i.e., "copy textfile.txt prn" Nothing happened, nothing spooled. I had the printer folder open to see if anything qued. Possibly some kind of DOS printing sub-system broke? Please advise. Thanks, David |
#10
|
|||
|
|||
DOS printing still broke
PS/2.... er, that's normally a mouse port.
Not LPT? Cari www.coribright.com "David Frohmader" wrote in message ... Duh! In the BIOS, yeah, right... (Dell Optiplex, press F2 at boot) Mode: PS/2 I/O address: 378h Changed it, then back again, saved, booted, tried to print again = same results: Nothing prints Booted from a floppy disk to DOS 5, copied a file to printer: "Copy 'filename.ext' prn" = it printed, so its not a hardware or BIOS issue Can't do that from either a command.com or cmd.exe prompt Thanks, Still hoping to avoid an OS reinstall David "Cari (MS-MVP)" wrote in message ... You need to check the LPT setting in the BIOS! Read your PC manual for details of how to enter the BIOS on your particular PC. It's a keypress on startup, but exactly which key to press varies from PC to PC. Cari www.coribright.com "David Frohmader" wrote in message ... Computer management/Device Manager/Ports/ECP Printer Port(LPT1): General tab: Enabled Port settings tab: Never use an interupt is checked; Enable legacy plug and play detection--Not checked; LPT port number: LPT1 Driver tab: version 5.1.2600.0 Dig sign: MS WinWP Publisher Resources tab: I/O range: 0378-037F; I/O range: 0778-077F Thanks, David "Cari (MS-MVP)" wrote in message ... What is the LPT setting in the BIOS? Cari www.coribright.com "David F" wrote in message news:fTgYb.334289$xy6.1667133@attbi_s02... Yes, I checked out his site. It is a locally connected printer, via plain old lpt1. As he says, I should have to do nothing. It should just work (as it has for years). Nothing to pool, just one printer connected to the computer, so can't do the second approach. Local, not networked, so "Net use lpt1 ..." does not work--even tried it == goofy results. Sooo, tried upgrading the printer driver. Did not work. Deleted printer from Printers and Faxes folder. While trying to reinstall, Windows "Found new hardware" and setup the driver right away. Still does not work. Also, I cannot print from either cmd prompt or command.com prompt by copying to printer. I.e., "copy filename.txt prn". On another WinXP machine this does work. So I don't think it is simply a problem with the DOS ap. It is a problem with Windows itself. So I'm baffled. Where to go from here? David F. "Cari (MS-MVP)" wrote in message ... Have you gone through Bruce Sanderson's page http://members.shaw.ca/bsanders/printfromdos.htm Cari www.coribright.com "David Frohmader" wrote in message ... Printing from a DOS ap just quit working. Windows aps print fine. I tried to copy a text file to the printer from a command prompt, i.e., "copy textfile.txt prn" Nothing happened, nothing spooled. I had the printer folder open to see if anything qued. Possibly some kind of DOS printing sub-system broke? Please advise. Thanks, David |
#11
|
|||
|
|||
DOS printing still broke
PS/2.... er, that's normally a mouse port.
Not LPT? Cari www.coribright.com "David Frohmader" wrote in message ... Duh! In the BIOS, yeah, right... (Dell Optiplex, press F2 at boot) Mode: PS/2 I/O address: 378h Changed it, then back again, saved, booted, tried to print again = same results: Nothing prints Booted from a floppy disk to DOS 5, copied a file to printer: "Copy 'filename.ext' prn" = it printed, so its not a hardware or BIOS issue Can't do that from either a command.com or cmd.exe prompt Thanks, Still hoping to avoid an OS reinstall David "Cari (MS-MVP)" wrote in message ... You need to check the LPT setting in the BIOS! Read your PC manual for details of how to enter the BIOS on your particular PC. It's a keypress on startup, but exactly which key to press varies from PC to PC. Cari www.coribright.com "David Frohmader" wrote in message ... Computer management/Device Manager/Ports/ECP Printer Port(LPT1): General tab: Enabled Port settings tab: Never use an interupt is checked; Enable legacy plug and play detection--Not checked; LPT port number: LPT1 Driver tab: version 5.1.2600.0 Dig sign: MS WinWP Publisher Resources tab: I/O range: 0378-037F; I/O range: 0778-077F Thanks, David "Cari (MS-MVP)" wrote in message ... What is the LPT setting in the BIOS? Cari www.coribright.com "David F" wrote in message news:fTgYb.334289$xy6.1667133@attbi_s02... Yes, I checked out his site. It is a locally connected printer, via plain old lpt1. As he says, I should have to do nothing. It should just work (as it has for years). Nothing to pool, just one printer connected to the computer, so can't do the second approach. Local, not networked, so "Net use lpt1 ..." does not work--even tried it == goofy results. Sooo, tried upgrading the printer driver. Did not work. Deleted printer from Printers and Faxes folder. While trying to reinstall, Windows "Found new hardware" and setup the driver right away. Still does not work. Also, I cannot print from either cmd prompt or command.com prompt by copying to printer. I.e., "copy filename.txt prn". On another WinXP machine this does work. So I don't think it is simply a problem with the DOS ap. It is a problem with Windows itself. So I'm baffled. Where to go from here? David F. "Cari (MS-MVP)" wrote in message ... Have you gone through Bruce Sanderson's page http://members.shaw.ca/bsanders/printfromdos.htm Cari www.coribright.com "David Frohmader" wrote in message ... Printing from a DOS ap just quit working. Windows aps print fine. I tried to copy a text file to the printer from a command prompt, i.e., "copy textfile.txt prn" Nothing happened, nothing spooled. I had the printer folder open to see if anything qued. Possibly some kind of DOS printing sub-system broke? Please advise. Thanks, David |
#12
|
|||
|
|||
DOS printing still broke
PS/2.... er, that's normally a mouse port.
Not LPT? Cari www.coribright.com "David Frohmader" wrote in message ... Duh! In the BIOS, yeah, right... (Dell Optiplex, press F2 at boot) Mode: PS/2 I/O address: 378h Changed it, then back again, saved, booted, tried to print again = same results: Nothing prints Booted from a floppy disk to DOS 5, copied a file to printer: "Copy 'filename.ext' prn" = it printed, so its not a hardware or BIOS issue Can't do that from either a command.com or cmd.exe prompt Thanks, Still hoping to avoid an OS reinstall David "Cari (MS-MVP)" wrote in message ... You need to check the LPT setting in the BIOS! Read your PC manual for details of how to enter the BIOS on your particular PC. It's a keypress on startup, but exactly which key to press varies from PC to PC. Cari www.coribright.com "David Frohmader" wrote in message ... Computer management/Device Manager/Ports/ECP Printer Port(LPT1): General tab: Enabled Port settings tab: Never use an interupt is checked; Enable legacy plug and play detection--Not checked; LPT port number: LPT1 Driver tab: version 5.1.2600.0 Dig sign: MS WinWP Publisher Resources tab: I/O range: 0378-037F; I/O range: 0778-077F Thanks, David "Cari (MS-MVP)" wrote in message ... What is the LPT setting in the BIOS? Cari www.coribright.com "David F" wrote in message news:fTgYb.334289$xy6.1667133@attbi_s02... Yes, I checked out his site. It is a locally connected printer, via plain old lpt1. As he says, I should have to do nothing. It should just work (as it has for years). Nothing to pool, just one printer connected to the computer, so can't do the second approach. Local, not networked, so "Net use lpt1 ..." does not work--even tried it == goofy results. Sooo, tried upgrading the printer driver. Did not work. Deleted printer from Printers and Faxes folder. While trying to reinstall, Windows "Found new hardware" and setup the driver right away. Still does not work. Also, I cannot print from either cmd prompt or command.com prompt by copying to printer. I.e., "copy filename.txt prn". On another WinXP machine this does work. So I don't think it is simply a problem with the DOS ap. It is a problem with Windows itself. So I'm baffled. Where to go from here? David F. "Cari (MS-MVP)" wrote in message ... Have you gone through Bruce Sanderson's page http://members.shaw.ca/bsanders/printfromdos.htm Cari www.coribright.com "David Frohmader" wrote in message ... Printing from a DOS ap just quit working. Windows aps print fine. I tried to copy a text file to the printer from a command prompt, i.e., "copy textfile.txt prn" Nothing happened, nothing spooled. I had the printer folder open to see if anything qued. Possibly some kind of DOS printing sub-system broke? Please advise. Thanks, David |
#13
|
|||
|
|||
DOS printing still broke
BIOS/Integrated devices/Parallel port/(mode options=PS/2, AT,EPP,ECP)
Checked another machine, same config. Appears default Dell setting on this model Optiplex. Another tech mentioned could be trouble with 16 bit Windows subsystem. Is there a way to replace this component w/o a complete reinstall? Thanks, David "Cari (MS-MVP)" wrote in message ... PS/2.... er, that's normally a mouse port. Not LPT? Cari www.coribright.com "David Frohmader" wrote in message ... Duh! In the BIOS, yeah, right... (Dell Optiplex, press F2 at boot) Mode: PS/2 I/O address: 378h Changed it, then back again, saved, booted, tried to print again = same results: Nothing prints Booted from a floppy disk to DOS 5, copied a file to printer: "Copy 'filename.ext' prn" = it printed, so its not a hardware or BIOS issue Can't do that from either a command.com or cmd.exe prompt Thanks, Still hoping to avoid an OS reinstall David "Cari (MS-MVP)" wrote in message ... You need to check the LPT setting in the BIOS! Read your PC manual for details of how to enter the BIOS on your particular PC. It's a keypress on startup, but exactly which key to press varies from PC to PC. Cari www.coribright.com "David Frohmader" wrote in message ... Computer management/Device Manager/Ports/ECP Printer Port(LPT1): General tab: Enabled Port settings tab: Never use an interupt is checked; Enable legacy plug and play detection--Not checked; LPT port number: LPT1 Driver tab: version 5.1.2600.0 Dig sign: MS WinWP Publisher Resources tab: I/O range: 0378-037F; I/O range: 0778-077F Thanks, David "Cari (MS-MVP)" wrote in message ... What is the LPT setting in the BIOS? Cari www.coribright.com "David F" wrote in message news:fTgYb.334289$xy6.1667133@attbi_s02... Yes, I checked out his site. It is a locally connected printer, via plain old lpt1. As he says, I should have to do nothing. It should just work (as it has for years). Nothing to pool, just one printer connected to the computer, so can't do the second approach. Local, not networked, so "Net use lpt1 ..." does not work--even tried it == goofy results. Sooo, tried upgrading the printer driver. Did not work. Deleted printer from Printers and Faxes folder. While trying to reinstall, Windows "Found new hardware" and setup the driver right away. Still does not work. Also, I cannot print from either cmd prompt or command.com prompt by copying to printer. I.e., "copy filename.txt prn". On another WinXP machine this does work. So I don't think it is simply a problem with the DOS ap. It is a problem with Windows itself. So I'm baffled. Where to go from here? David F. "Cari (MS-MVP)" wrote in message ... Have you gone through Bruce Sanderson's page http://members.shaw.ca/bsanders/printfromdos.htm Cari www.coribright.com "David Frohmader" wrote in message ... Printing from a DOS ap just quit working. Windows aps print fine. I tried to copy a text file to the printer from a command prompt, i.e., "copy textfile.txt prn" Nothing happened, nothing spooled. I had the printer folder open to see if anything qued. Possibly some kind of DOS printing sub-system broke? Please advise. Thanks, David |
#14
|
|||
|
|||
DOS printing still broke
Well, I finally discovered a solution for this problem, thanks to misc
people--MS Support and a friend. Since someone named Lanny emailed me for the solution, I thought I would post it here. Maybe someone else will find the answer by a google search. Hi Lanny, So how did I fix it? Ran chkdsk. It has worked fine ever since. Apparently NTFS does not repair all clusters on the fly. Check kb to find out how. I did it from the gui, from Explorer, right click drive C, then tools (maybe). It is there. If I did it again, I would reboot and do it from a command prompt. Does maybe F8 get you there when booting? Not sure. The gui approach does not tell you what is going on. I assume the command prompt way works as in the olden days. After days of futility I called MS. Eventually we did this: Delete the printer in the Printers and Faxes folder. Right click My Computer, Manage, Select Device Manager, Expand Ports, delete the printer port (right click, delete) Reboot, Windows replaces LPT1, then adds the printer that was deleleted. MS tech wanted me to change the Port Settings for LPT1. Right click, properties, port settings tab. Well, this worked for one day, then the problem came back. Running chkdsk has resolved the problem permanently--at least so far. Good luck, David -----Original Message----- From: Lenny Wintfeld Sent: Friday, March 12, 2004 1:22 PM To: David Frohmader Subject: DOS Printing Hi Been following your print problems on the newsgroup. When you get it working please let me know. I have EXACTLY the same problem and don;t want to waste peoples time on the windowsxp.print_fax newsgroup by asking the same question again. Regards & good luck Lenny |
Thread Tools | |
Display Modes | |
|
|