If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Fast user switching after screen saver - problem
I'm running XP Pro SP1. Fast user switching (FUS) works fine when I press the "windows-L" key combination. However, when my screen saver is active and I want to log back in, it reverts to the standard login screen. It all worked fine up until a few days ago. I don't know what changed I have seen lots of articles on-line about FUS troubleshooting, but none of them seem to apply: * this system is not on a domain * I haven't installed any software like Citrix that replaces the GINA DLL * I have verified that the FUS service is enabled and running * I have verified that "Use the Welcome Screen" and "Use Fast User Switching" are enabled in the Users and Groups control panel * I have verified that "On resume, password protect" is enabled in the screen saver control panel Any other ideas? Thanks in advance. -Eric |
#2
|
|||
|
|||
Fast user switching after screen saver - problem
Eric;
Have a look he Lock Windows XP workstation with Welcome Screen and FUS enabled http://www.mvps.org/sramesh2k/LockXP.htm -- Hope this helps. Let us know. Wes In news:dVebc.60726$JO3.36619@attbi_s04, Eric hunted and pecked: I'm running XP Pro SP1. Fast user switching (FUS) works fine when I press the "windows-L" key combination. However, when my screen saver is active and I want to log back in, it reverts to the standard login screen. It all worked fine up until a few days ago. I don't know what changed I have seen lots of articles on-line about FUS troubleshooting, but none of them seem to apply: * this system is not on a domain * I haven't installed any software like Citrix that replaces the GINA DLL * I have verified that the FUS service is enabled and running * I have verified that "Use the Welcome Screen" and "Use Fast User Switching" are enabled in the Users and Groups control panel * I have verified that "On resume, password protect" is enabled in the screen saver control panel Any other ideas? Thanks in advance. -Eric |
#3
|
|||
|
|||
Fast user switching after screen saver - problem
Interesting... When I run LockXP, it says "Fast User Switching is currently enabled". However, when I hit the "Lock Workstation" button, I get the standard (ie, non-FUS) unlock dialog. "Wesley Vogel" wrote in message news:5rfbc.60011$K91.147786@attbi_s02... Eric; Have a look he Lock Windows XP workstation with Welcome Screen and FUS enabled http://www.mvps.org/sramesh2k/LockXP.htm -- Hope this helps. Let us know. Wes In news:dVebc.60726$JO3.36619@attbi_s04, Eric hunted and pecked: I'm running XP Pro SP1. Fast user switching (FUS) works fine when I press the "windows-L" key combination. However, when my screen saver is active and I want to log back in, it reverts to the standard login screen. It all worked fine up until a few days ago. I don't know what changed I have seen lots of articles on-line about FUS troubleshooting, but none of them seem to apply: * this system is not on a domain * I haven't installed any software like Citrix that replaces the GINA DLL * I have verified that the FUS service is enabled and running * I have verified that "Use the Welcome Screen" and "Use Fast User Switching" are enabled in the Users and Groups control panel * I have verified that "On resume, password protect" is enabled in the screen saver control panel Any other ideas? Thanks in advance. -Eric |
#4
|
|||
|
|||
Fast user switching after screen saver - problem
Interesting!
* On resume, password protect - Should appear only when FUS/Welcome = Screen is disabled. [It actually shows "On resume, display welcome screen" with FUS/WS = enabled] HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\LogonType HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\LogonType HKLM\SOFTWARE\Microsoft\Windows = NT\CurrentVersion\Winlogon\AllowMultipleTSSessions HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\AllowMulti= pleTSSessions Check the above registry paths and post their values here. They all = should be one (with FUS/Welcome Screen enabled.) --=20 Ramesh - Microsoft MVP Windows XP - Shell/User www.mvps.org/sramesh2k http://www.mvps.org/sramesh2k/Tips_Page.htm http://www.mvps.org "Eric" wrote in message = news:dVebc.60726$JO3.36619@attbi_s04... I'm running XP Pro SP1. Fast user switching (FUS) works fine when I = press the "windows-L" key combination. However, when my screen saver is active = and I want to log back in, it reverts to the standard login screen. It all worked fine up until a few days ago. I don't know what changed I have seen lots of articles on-line about FUS troubleshooting, but none = of them seem to apply: * this system is not on a domain * I haven't installed any software like Citrix that replaces the GINA = DLL * I have verified that the FUS service is enabled and running * I have verified that "Use the Welcome Screen" and "Use Fast User Switching" are enabled in the Users and Groups control panel * I have verified that "On resume, password protect" is enabled in the screen saver control panel Any other ideas? Thanks in advance. -Eric |
#5
|
|||
|
|||
Fast user switching after screen saver - problem
Meanwhile, try this from Kellys Korner.
Line 161: On Resume, Display Welcome Screen=20 http://www.kellys-korner-xp.com/xp_tweaks.htm --=20 Ramesh - Microsoft MVP Windows XP - Shell/User www.mvps.org/sramesh2k http://www.mvps.org/sramesh2k/Tips_Page.htm http://www.mvps.org "Ramesh [MVP]" wrote in message = ... Interesting! * On resume, password protect - Should appear only when FUS/Welcome = Screen is disabled. [It actually shows "On resume, display welcome screen" with FUS/WS = enabled] HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\LogonType HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\LogonType HKLM\SOFTWARE\Microsoft\Windows = NT\CurrentVersion\Winlogon\AllowMultipleTSSessions HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\AllowMulti= pleTSSessions Check the above registry paths and post their values here. They all = should be one (with FUS/Welcome Screen enabled.) --=20 Ramesh - Microsoft MVP Windows XP - Shell/User www.mvps.org/sramesh2k http://www.mvps.org/sramesh2k/Tips_Page.htm http://www.mvps.org "Eric" wrote in message = news:dVebc.60726$JO3.36619@attbi_s04... I'm running XP Pro SP1. Fast user switching (FUS) works fine when I = press the "windows-L" key combination. However, when my screen saver is active = and I want to log back in, it reverts to the standard login screen. It all worked fine up until a few days ago. I don't know what changed I have seen lots of articles on-line about FUS troubleshooting, but none = of them seem to apply: * this system is not on a domain * I haven't installed any software like Citrix that replaces the GINA = DLL * I have verified that the FUS service is enabled and running * I have verified that "Use the Welcome Screen" and "Use Fast User Switching" are enabled in the Users and Groups control panel * I have verified that "On resume, password protect" is enabled in the screen saver control panel Any other ideas? Thanks in advance. -Eric |
#6
|
|||
|
|||
Fast user switching after screen saver - problem
Interesting!
* On resume, password protect - Should appear only when FUS/Welcome = Screen is disabled. [It actually shows "On resume, display welcome screen" with FUS/WS = enabled] HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\LogonType HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\LogonType HKLM\SOFTWARE\Microsoft\Windows = NT\CurrentVersion\Winlogon\AllowMultipleTSSessions HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\AllowMulti= pleTSSessions Check the above registry paths and post their values here. They all = should be one (with FUS/Welcome Screen enabled.) --=20 Ramesh - Microsoft MVP Windows XP - Shell/User www.mvps.org/sramesh2k http://www.mvps.org/sramesh2k/Tips_Page.htm http://www.mvps.org "Eric" wrote in message = news:dVebc.60726$JO3.36619@attbi_s04... I'm running XP Pro SP1. Fast user switching (FUS) works fine when I = press the "windows-L" key combination. However, when my screen saver is active = and I want to log back in, it reverts to the standard login screen. It all worked fine up until a few days ago. I don't know what changed I have seen lots of articles on-line about FUS troubleshooting, but none = of them seem to apply: * this system is not on a domain * I haven't installed any software like Citrix that replaces the GINA = DLL * I have verified that the FUS service is enabled and running * I have verified that "Use the Welcome Screen" and "Use Fast User Switching" are enabled in the Users and Groups control panel * I have verified that "On resume, password protect" is enabled in the screen saver control panel Any other ideas? Thanks in advance. -Eric |
#7
|
|||
|
|||
Fast user switching after screen saver - problem
Meanwhile, try this from Kellys Korner.
Line 161: On Resume, Display Welcome Screen=20 http://www.kellys-korner-xp.com/xp_tweaks.htm --=20 Ramesh - Microsoft MVP Windows XP - Shell/User www.mvps.org/sramesh2k http://www.mvps.org/sramesh2k/Tips_Page.htm http://www.mvps.org "Ramesh [MVP]" wrote in message = ... Interesting! * On resume, password protect - Should appear only when FUS/Welcome = Screen is disabled. [It actually shows "On resume, display welcome screen" with FUS/WS = enabled] HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\LogonType HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\LogonType HKLM\SOFTWARE\Microsoft\Windows = NT\CurrentVersion\Winlogon\AllowMultipleTSSessions HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\AllowMulti= pleTSSessions Check the above registry paths and post their values here. They all = should be one (with FUS/Welcome Screen enabled.) --=20 Ramesh - Microsoft MVP Windows XP - Shell/User www.mvps.org/sramesh2k http://www.mvps.org/sramesh2k/Tips_Page.htm http://www.mvps.org "Eric" wrote in message = news:dVebc.60726$JO3.36619@attbi_s04... I'm running XP Pro SP1. Fast user switching (FUS) works fine when I = press the "windows-L" key combination. However, when my screen saver is active = and I want to log back in, it reverts to the standard login screen. It all worked fine up until a few days ago. I don't know what changed I have seen lots of articles on-line about FUS troubleshooting, but none = of them seem to apply: * this system is not on a domain * I haven't installed any software like Citrix that replaces the GINA = DLL * I have verified that the FUS service is enabled and running * I have verified that "Use the Welcome Screen" and "Use Fast User Switching" are enabled in the Users and Groups control panel * I have verified that "On resume, password protect" is enabled in the screen saver control panel Any other ideas? Thanks in advance. -Eric |
#8
|
|||
|
|||
Fast user switching after screen saver - problem
Interesting!
* On resume, password protect - Should appear only when FUS/Welcome = Screen is disabled. [It actually shows "On resume, display welcome screen" with FUS/WS = enabled] HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\LogonType HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\LogonType HKLM\SOFTWARE\Microsoft\Windows = NT\CurrentVersion\Winlogon\AllowMultipleTSSessions HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\AllowMulti= pleTSSessions Check the above registry paths and post their values here. They all = should be one (with FUS/Welcome Screen enabled.) --=20 Ramesh - Microsoft MVP Windows XP - Shell/User www.mvps.org/sramesh2k http://www.mvps.org/sramesh2k/Tips_Page.htm http://www.mvps.org "Eric" wrote in message = news:dVebc.60726$JO3.36619@attbi_s04... I'm running XP Pro SP1. Fast user switching (FUS) works fine when I = press the "windows-L" key combination. However, when my screen saver is active = and I want to log back in, it reverts to the standard login screen. It all worked fine up until a few days ago. I don't know what changed I have seen lots of articles on-line about FUS troubleshooting, but none = of them seem to apply: * this system is not on a domain * I haven't installed any software like Citrix that replaces the GINA = DLL * I have verified that the FUS service is enabled and running * I have verified that "Use the Welcome Screen" and "Use Fast User Switching" are enabled in the Users and Groups control panel * I have verified that "On resume, password protect" is enabled in the screen saver control panel Any other ideas? Thanks in advance. -Eric |
#9
|
|||
|
|||
Fast user switching after screen saver - problem
Meanwhile, try this from Kellys Korner.
Line 161: On Resume, Display Welcome Screen=20 http://www.kellys-korner-xp.com/xp_tweaks.htm --=20 Ramesh - Microsoft MVP Windows XP - Shell/User www.mvps.org/sramesh2k http://www.mvps.org/sramesh2k/Tips_Page.htm http://www.mvps.org "Ramesh [MVP]" wrote in message = ... Interesting! * On resume, password protect - Should appear only when FUS/Welcome = Screen is disabled. [It actually shows "On resume, display welcome screen" with FUS/WS = enabled] HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\LogonType HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\LogonType HKLM\SOFTWARE\Microsoft\Windows = NT\CurrentVersion\Winlogon\AllowMultipleTSSessions HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\AllowMulti= pleTSSessions Check the above registry paths and post their values here. They all = should be one (with FUS/Welcome Screen enabled.) --=20 Ramesh - Microsoft MVP Windows XP - Shell/User www.mvps.org/sramesh2k http://www.mvps.org/sramesh2k/Tips_Page.htm http://www.mvps.org "Eric" wrote in message = news:dVebc.60726$JO3.36619@attbi_s04... I'm running XP Pro SP1. Fast user switching (FUS) works fine when I = press the "windows-L" key combination. However, when my screen saver is active = and I want to log back in, it reverts to the standard login screen. It all worked fine up until a few days ago. I don't know what changed I have seen lots of articles on-line about FUS troubleshooting, but none = of them seem to apply: * this system is not on a domain * I haven't installed any software like Citrix that replaces the GINA = DLL * I have verified that the FUS service is enabled and running * I have verified that "Use the Welcome Screen" and "Use Fast User Switching" are enabled in the Users and Groups control panel * I have verified that "On resume, password protect" is enabled in the screen saver control panel Any other ideas? Thanks in advance. -Eric |
#10
|
|||
|
|||
Fast user switching after screen saver - problem
Interesting!
* On resume, password protect - Should appear only when FUS/Welcome = Screen is disabled. [It actually shows "On resume, display welcome screen" with FUS/WS = enabled] HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\LogonType HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\LogonType HKLM\SOFTWARE\Microsoft\Windows = NT\CurrentVersion\Winlogon\AllowMultipleTSSessions HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\AllowMulti= pleTSSessions Check the above registry paths and post their values here. They all = should be one (with FUS/Welcome Screen enabled.) --=20 Ramesh - Microsoft MVP Windows XP - Shell/User www.mvps.org/sramesh2k http://www.mvps.org/sramesh2k/Tips_Page.htm http://www.mvps.org "Eric" wrote in message = news:dVebc.60726$JO3.36619@attbi_s04... I'm running XP Pro SP1. Fast user switching (FUS) works fine when I = press the "windows-L" key combination. However, when my screen saver is active = and I want to log back in, it reverts to the standard login screen. It all worked fine up until a few days ago. I don't know what changed I have seen lots of articles on-line about FUS troubleshooting, but none = of them seem to apply: * this system is not on a domain * I haven't installed any software like Citrix that replaces the GINA = DLL * I have verified that the FUS service is enabled and running * I have verified that "Use the Welcome Screen" and "Use Fast User Switching" are enabled in the Users and Groups control panel * I have verified that "On resume, password protect" is enabled in the screen saver control panel Any other ideas? Thanks in advance. -Eric |
#11
|
|||
|
|||
Fast user switching after screen saver - problem
Meanwhile, try this from Kellys Korner.
Line 161: On Resume, Display Welcome Screen=20 http://www.kellys-korner-xp.com/xp_tweaks.htm --=20 Ramesh - Microsoft MVP Windows XP - Shell/User www.mvps.org/sramesh2k http://www.mvps.org/sramesh2k/Tips_Page.htm http://www.mvps.org "Ramesh [MVP]" wrote in message = ... Interesting! * On resume, password protect - Should appear only when FUS/Welcome = Screen is disabled. [It actually shows "On resume, display welcome screen" with FUS/WS = enabled] HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\LogonType HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\LogonType HKLM\SOFTWARE\Microsoft\Windows = NT\CurrentVersion\Winlogon\AllowMultipleTSSessions HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\AllowMulti= pleTSSessions Check the above registry paths and post their values here. They all = should be one (with FUS/Welcome Screen enabled.) --=20 Ramesh - Microsoft MVP Windows XP - Shell/User www.mvps.org/sramesh2k http://www.mvps.org/sramesh2k/Tips_Page.htm http://www.mvps.org "Eric" wrote in message = news:dVebc.60726$JO3.36619@attbi_s04... I'm running XP Pro SP1. Fast user switching (FUS) works fine when I = press the "windows-L" key combination. However, when my screen saver is active = and I want to log back in, it reverts to the standard login screen. It all worked fine up until a few days ago. I don't know what changed I have seen lots of articles on-line about FUS troubleshooting, but none = of them seem to apply: * this system is not on a domain * I haven't installed any software like Citrix that replaces the GINA = DLL * I have verified that the FUS service is enabled and running * I have verified that "Use the Welcome Screen" and "Use Fast User Switching" are enabled in the Users and Groups control panel * I have verified that "On resume, password protect" is enabled in the screen saver control panel Any other ideas? Thanks in advance. -Eric |
#12
|
|||
|
|||
Fast user switching after screen saver - problem
Interesting!
* On resume, password protect - Should appear only when FUS/Welcome = Screen is disabled. [It actually shows "On resume, display welcome screen" with FUS/WS = enabled] HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\LogonType HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\LogonType HKLM\SOFTWARE\Microsoft\Windows = NT\CurrentVersion\Winlogon\AllowMultipleTSSessions HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\AllowMulti= pleTSSessions Check the above registry paths and post their values here. They all = should be one (with FUS/Welcome Screen enabled.) --=20 Ramesh - Microsoft MVP Windows XP - Shell/User www.mvps.org/sramesh2k http://www.mvps.org/sramesh2k/Tips_Page.htm http://www.mvps.org "Eric" wrote in message = news:dVebc.60726$JO3.36619@attbi_s04... I'm running XP Pro SP1. Fast user switching (FUS) works fine when I = press the "windows-L" key combination. However, when my screen saver is active = and I want to log back in, it reverts to the standard login screen. It all worked fine up until a few days ago. I don't know what changed I have seen lots of articles on-line about FUS troubleshooting, but none = of them seem to apply: * this system is not on a domain * I haven't installed any software like Citrix that replaces the GINA = DLL * I have verified that the FUS service is enabled and running * I have verified that "Use the Welcome Screen" and "Use Fast User Switching" are enabled in the Users and Groups control panel * I have verified that "On resume, password protect" is enabled in the screen saver control panel Any other ideas? Thanks in advance. -Eric |
#13
|
|||
|
|||
Fast user switching after screen saver - problem
Meanwhile, try this from Kellys Korner.
Line 161: On Resume, Display Welcome Screen=20 http://www.kellys-korner-xp.com/xp_tweaks.htm --=20 Ramesh - Microsoft MVP Windows XP - Shell/User www.mvps.org/sramesh2k http://www.mvps.org/sramesh2k/Tips_Page.htm http://www.mvps.org "Ramesh [MVP]" wrote in message = ... Interesting! * On resume, password protect - Should appear only when FUS/Welcome = Screen is disabled. [It actually shows "On resume, display welcome screen" with FUS/WS = enabled] HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\LogonType HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\LogonType HKLM\SOFTWARE\Microsoft\Windows = NT\CurrentVersion\Winlogon\AllowMultipleTSSessions HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\AllowMulti= pleTSSessions Check the above registry paths and post their values here. They all = should be one (with FUS/Welcome Screen enabled.) --=20 Ramesh - Microsoft MVP Windows XP - Shell/User www.mvps.org/sramesh2k http://www.mvps.org/sramesh2k/Tips_Page.htm http://www.mvps.org "Eric" wrote in message = news:dVebc.60726$JO3.36619@attbi_s04... I'm running XP Pro SP1. Fast user switching (FUS) works fine when I = press the "windows-L" key combination. However, when my screen saver is active = and I want to log back in, it reverts to the standard login screen. It all worked fine up until a few days ago. I don't know what changed I have seen lots of articles on-line about FUS troubleshooting, but none = of them seem to apply: * this system is not on a domain * I haven't installed any software like Citrix that replaces the GINA = DLL * I have verified that the FUS service is enabled and running * I have verified that "Use the Welcome Screen" and "Use Fast User Switching" are enabled in the Users and Groups control panel * I have verified that "On resume, password protect" is enabled in the screen saver control panel Any other ideas? Thanks in advance. -Eric |
#14
|
|||
|
|||
Fast user switching after screen saver - problem
Ramesh -
Thanks for the suggestion, but none of those registry values even exist on my system: HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\LogonType - no such value HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\LogonType - no "system" key under "policies" HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\AllowMultipleTSSessions - no such value HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\AllowMultiple TSSessions - no "system" key under "policies" Are they supposed to be string "1" or dword 1? "Ramesh [MVP]" wrote in message ... Interesting! * On resume, password protect - Should appear only when FUS/Welcome Screen is disabled. [It actually shows "On resume, display welcome screen" with FUS/WS enabled] HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\LogonType HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\LogonType HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\AllowMultipleTSSessions HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\AllowMultiple TSSessions Check the above registry paths and post their values here. They all should be one (with FUS/Welcome Screen enabled.) -- Ramesh - Microsoft MVP Windows XP - Shell/User www.mvps.org/sramesh2k http://www.mvps.org/sramesh2k/Tips_Page.htm http://www.mvps.org "Eric" wrote in message news:dVebc.60726$JO3.36619@attbi_s04... I'm running XP Pro SP1. Fast user switching (FUS) works fine when I press the "windows-L" key combination. However, when my screen saver is active and I want to log back in, it reverts to the standard login screen. It all worked fine up until a few days ago. I don't know what changed I have seen lots of articles on-line about FUS troubleshooting, but none of them seem to apply: * this system is not on a domain * I haven't installed any software like Citrix that replaces the GINA DLL * I have verified that the FUS service is enabled and running * I have verified that "Use the Welcome Screen" and "Use Fast User Switching" are enabled in the Users and Groups control panel * I have verified that "On resume, password protect" is enabled in the screen saver control panel Any other ideas? Thanks in advance. -Eric |
#15
|
|||
|
|||
Fast user switching after screen saver - problem
Interesting!
* On resume, password protect - Should appear only when FUS/Welcome = Screen is disabled. [It actually shows "On resume, display welcome screen" with FUS/WS = enabled] HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\LogonType HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\LogonType HKLM\SOFTWARE\Microsoft\Windows = NT\CurrentVersion\Winlogon\AllowMultipleTSSessions HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\pol icies\system\AllowMulti= pleTSSessions Check the above registry paths and post their values here. They all = should be one (with FUS/Welcome Screen enabled.) --=20 Ramesh - Microsoft MVP Windows XP - Shell/User www.mvps.org/sramesh2k http://www.mvps.org/sramesh2k/Tips_Page.htm http://www.mvps.org "Eric" wrote in message = news:dVebc.60726$JO3.36619@attbi_s04... I'm running XP Pro SP1. Fast user switching (FUS) works fine when I = press the "windows-L" key combination. However, when my screen saver is active = and I want to log back in, it reverts to the standard login screen. It all worked fine up until a few days ago. I don't know what changed I have seen lots of articles on-line about FUS troubleshooting, but none = of them seem to apply: * this system is not on a domain * I haven't installed any software like Citrix that replaces the GINA = DLL * I have verified that the FUS service is enabled and running * I have verified that "Use the Welcome Screen" and "Use Fast User Switching" are enabled in the Users and Groups control panel * I have verified that "On resume, password protect" is enabled in the screen saver control panel Any other ideas? Thanks in advance. -Eric |
Thread Tools | |
Display Modes | |
|
|