A Windows XP help forum. PCbanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » PCbanter forum » Microsoft Windows XP » The Basics
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Multiple configurations question



 
 
Thread Tools Display Modes
  #1  
Old June 7th 09, 08:59 PM posted to microsoft.public.windowsxp.basics
Richard
external usenet poster
 
Posts: 49
Default Multiple configurations question

Is anyone familiar with how I can set up my computer with different
configurations.

What I hope to do is use the same computer but with two different set ups.
One will be for work related and home related stuff - for which I have a lot
of software installed. I also want to use the computer for graphic - movies
etc. Installing that sort of software loads up the background system
programs and slows the machine (4gRAM, Dual Core). I was wondering if I
could create a boot CD for one of the configurations - so the machine will
only load the system support processes needed for that sort of work. I am
looking to avoid purchasing another machine for the pictures and videos.

Any help, suggestions - or even a "don't bother" will be appreciated.


Ads
  #2  
Old June 7th 09, 09:13 PM posted to microsoft.public.windowsxp.basics
DL[_3_]
external usenet poster
 
Posts: 929
Default Multiple configurations question

It depends which avenue you wish to explore and what software/licences are
available to you.
To keep everything totally isolated you could use Virtual PC, or you could
install a seperate hd, disconnect the current hd (C, windows drive) install
win to this new drive, and the specific software you require.
Then connect the origonal C drive and use the bios boot options to select
which drive to boot from.
You would need, legally, two win licences

"Richard" wrote in message
...
Is anyone familiar with how I can set up my computer with different
configurations.

What I hope to do is use the same computer but with two different set ups.
One will be for work related and home related stuff - for which I have a
lot of software installed. I also want to use the computer for graphic -
movies etc. Installing that sort of software loads up the background
system programs and slows the machine (4gRAM, Dual Core). I was wondering
if I could create a boot CD for one of the configurations - so the machine
will only load the system support processes needed for that sort of work.
I am looking to avoid purchasing another machine for the pictures and
videos.

Any help, suggestions - or even a "don't bother" will be appreciated.



  #3  
Old June 7th 09, 09:13 PM posted to microsoft.public.windowsxp.basics
DL[_3_]
external usenet poster
 
Posts: 929
Default Multiple configurations question

It depends which avenue you wish to explore and what software/licences are
available to you.
To keep everything totally isolated you could use Virtual PC, or you could
install a seperate hd, disconnect the current hd (C, windows drive) install
win to this new drive, and the specific software you require.
Then connect the origonal C drive and use the bios boot options to select
which drive to boot from.
You would need, legally, two win licences

"Richard" wrote in message
...
Is anyone familiar with how I can set up my computer with different
configurations.

What I hope to do is use the same computer but with two different set ups.
One will be for work related and home related stuff - for which I have a
lot of software installed. I also want to use the computer for graphic -
movies etc. Installing that sort of software loads up the background
system programs and slows the machine (4gRAM, Dual Core). I was wondering
if I could create a boot CD for one of the configurations - so the machine
will only load the system support processes needed for that sort of work.
I am looking to avoid purchasing another machine for the pictures and
videos.

Any help, suggestions - or even a "don't bother" will be appreciated.



  #4  
Old June 7th 09, 10:25 PM posted to microsoft.public.windowsxp.basics
Richard
external usenet poster
 
Posts: 49
Default Multiple configurations question

The virtual PC idea - does that need a second machine. I expect to have
everything licensed - and I did not think of two hard drives with a
selection menu at boot up. What I am hoping for is to keep the background
systems reasonable and the registry not bloated - to keep some of the
machine's speed. I expect to use network or usb attached storage drives for
both set ups.

TIA for the suggestions.

"DL" wrote in message
...
It depends which avenue you wish to explore and what software/licences are
available to you.
To keep everything totally isolated you could use Virtual PC, or you could
install a seperate hd, disconnect the current hd (C, windows drive)
install win to this new drive, and the specific software you require.
Then connect the origonal C drive and use the bios boot options to select
which drive to boot from.
You would need, legally, two win licences

"Richard" wrote in message
...
Is anyone familiar with how I can set up my computer with different
configurations.

What I hope to do is use the same computer but with two different set
ups. One will be for work related and home related stuff - for which I
have a lot of software installed. I also want to use the computer for
graphic - movies etc. Installing that sort of software loads up the
background system programs and slows the machine (4gRAM, Dual Core). I
was wondering if I could create a boot CD for one of the configurations -
so the machine will only load the system support processes needed for
that sort of work. I am looking to avoid purchasing another machine for
the pictures and videos.

Any help, suggestions - or even a "don't bother" will be appreciated.






  #5  
Old June 7th 09, 10:25 PM posted to microsoft.public.windowsxp.basics
Richard
external usenet poster
 
Posts: 49
Default Multiple configurations question

The virtual PC idea - does that need a second machine. I expect to have
everything licensed - and I did not think of two hard drives with a
selection menu at boot up. What I am hoping for is to keep the background
systems reasonable and the registry not bloated - to keep some of the
machine's speed. I expect to use network or usb attached storage drives for
both set ups.

TIA for the suggestions.

"DL" wrote in message
...
It depends which avenue you wish to explore and what software/licences are
available to you.
To keep everything totally isolated you could use Virtual PC, or you could
install a seperate hd, disconnect the current hd (C, windows drive)
install win to this new drive, and the specific software you require.
Then connect the origonal C drive and use the bios boot options to select
which drive to boot from.
You would need, legally, two win licences

"Richard" wrote in message
...
Is anyone familiar with how I can set up my computer with different
configurations.

What I hope to do is use the same computer but with two different set
ups. One will be for work related and home related stuff - for which I
have a lot of software installed. I also want to use the computer for
graphic - movies etc. Installing that sort of software loads up the
background system programs and slows the machine (4gRAM, Dual Core). I
was wondering if I could create a boot CD for one of the configurations -
so the machine will only load the system support processes needed for
that sort of work. I am looking to avoid purchasing another machine for
the pictures and videos.

Any help, suggestions - or even a "don't bother" will be appreciated.






  #6  
Old June 7th 09, 11:22 PM posted to microsoft.public.windowsxp.basics
DL[_3_]
external usenet poster
 
Posts: 929
Default Multiple configurations question

Virtual PC doesnt require a second PC, see link below
http://www.microsoft.com/downloads/d...displaylang=en
Both options would mean completely seperate win installations, there would
be no interaction between the two o/s - much the same as if you had two
seperate PC's

NB with seperate HD's its the bios boot menu you access to select the drive
and not a win bootup menu, of the type you would get by eg installing two
versions of win. You would need to check that your mobo bios has a bootable
menu option to select the drive to boot from, most modern ones do.

Its also possible that Vista, or the soon to be available Win7, with its
capacity to utilise more ram than winxp may offer greater usibility with
your software when installed to a single o/s

"Richard" wrote in message
...
The virtual PC idea - does that need a second machine. I expect to have
everything licensed - and I did not think of two hard drives with a
selection menu at boot up. What I am hoping for is to keep the background
systems reasonable and the registry not bloated - to keep some of the
machine's speed. I expect to use network or usb attached storage drives
for both set ups.

TIA for the suggestions.

"DL" wrote in message
...
It depends which avenue you wish to explore and what software/licences
are available to you.
To keep everything totally isolated you could use Virtual PC, or you
could install a seperate hd, disconnect the current hd (C, windows drive)
install win to this new drive, and the specific software you require.
Then connect the origonal C drive and use the bios boot options to select
which drive to boot from.
You would need, legally, two win licences

"Richard" wrote in message
...
Is anyone familiar with how I can set up my computer with different
configurations.

What I hope to do is use the same computer but with two different set
ups. One will be for work related and home related stuff - for which I
have a lot of software installed. I also want to use the computer for
graphic - movies etc. Installing that sort of software loads up the
background system programs and slows the machine (4gRAM, Dual Core). I
was wondering if I could create a boot CD for one of the
configurations - so the machine will only load the system support
processes needed for that sort of work. I am looking to avoid purchasing
another machine for the pictures and videos.

Any help, suggestions - or even a "don't bother" will be appreciated.








  #7  
Old June 7th 09, 11:22 PM posted to microsoft.public.windowsxp.basics
DL[_3_]
external usenet poster
 
Posts: 929
Default Multiple configurations question

Virtual PC doesnt require a second PC, see link below
http://www.microsoft.com/downloads/d...displaylang=en
Both options would mean completely seperate win installations, there would
be no interaction between the two o/s - much the same as if you had two
seperate PC's

NB with seperate HD's its the bios boot menu you access to select the drive
and not a win bootup menu, of the type you would get by eg installing two
versions of win. You would need to check that your mobo bios has a bootable
menu option to select the drive to boot from, most modern ones do.

Its also possible that Vista, or the soon to be available Win7, with its
capacity to utilise more ram than winxp may offer greater usibility with
your software when installed to a single o/s

"Richard" wrote in message
...
The virtual PC idea - does that need a second machine. I expect to have
everything licensed - and I did not think of two hard drives with a
selection menu at boot up. What I am hoping for is to keep the background
systems reasonable and the registry not bloated - to keep some of the
machine's speed. I expect to use network or usb attached storage drives
for both set ups.

TIA for the suggestions.

"DL" wrote in message
...
It depends which avenue you wish to explore and what software/licences
are available to you.
To keep everything totally isolated you could use Virtual PC, or you
could install a seperate hd, disconnect the current hd (C, windows drive)
install win to this new drive, and the specific software you require.
Then connect the origonal C drive and use the bios boot options to select
which drive to boot from.
You would need, legally, two win licences

"Richard" wrote in message
...
Is anyone familiar with how I can set up my computer with different
configurations.

What I hope to do is use the same computer but with two different set
ups. One will be for work related and home related stuff - for which I
have a lot of software installed. I also want to use the computer for
graphic - movies etc. Installing that sort of software loads up the
background system programs and slows the machine (4gRAM, Dual Core). I
was wondering if I could create a boot CD for one of the
configurations - so the machine will only load the system support
processes needed for that sort of work. I am looking to avoid purchasing
another machine for the pictures and videos.

Any help, suggestions - or even a "don't bother" will be appreciated.








  #8  
Old June 7th 09, 11:39 PM posted to microsoft.public.windowsxp.basics
No_Name
external usenet poster
 
Posts: 2
Default Multiple configurations question

Thanks for the further information. I guess I will be pushed to Vista if it
will handle the bloat I usually have with my machines. I install many
programs - some I use occasionally, others often. ususlly I can max out a 40
gig frive with software. I have not heard anything about Win 7, but what I
heard about Vista has kept me with XP (thank goodness Dell sells XP
machines). If I can have it all on one machine - that would be good - but
the Vista bad news regarding slowness and bugs has me hesitant to move to
that OS. I have a Dell Vostro w/ 4gRAM, Dual Core processor and it is pretty
fast (although with all of the programs - boots a little slow).

Again, thanks so much for your suggestions.
  #9  
Old June 7th 09, 11:39 PM posted to microsoft.public.windowsxp.basics
No_Name
external usenet poster
 
Posts: 2
Default Multiple configurations question

Thanks for the further information. I guess I will be pushed to Vista if it
will handle the bloat I usually have with my machines. I install many
programs - some I use occasionally, others often. ususlly I can max out a 40
gig frive with software. I have not heard anything about Win 7, but what I
heard about Vista has kept me with XP (thank goodness Dell sells XP
machines). If I can have it all on one machine - that would be good - but
the Vista bad news regarding slowness and bugs has me hesitant to move to
that OS. I have a Dell Vostro w/ 4gRAM, Dual Core processor and it is pretty
fast (although with all of the programs - boots a little slow).

Again, thanks so much for your suggestions.
  #10  
Old June 8th 09, 03:02 AM posted to microsoft.public.windowsxp.basics
DL[_3_]
external usenet poster
 
Posts: 929
Default Multiple configurations question

I have a Vostro with Vista Business, it runs fine

wrote in message
...
Thanks for the further information. I guess I will be pushed to Vista if
it
will handle the bloat I usually have with my machines. I install many
programs - some I use occasionally, others often. ususlly I can max out a
40
gig frive with software. I have not heard anything about Win 7, but what I
heard about Vista has kept me with XP (thank goodness Dell sells XP
machines). If I can have it all on one machine - that would be good - but
the Vista bad news regarding slowness and bugs has me hesitant to move to
that OS. I have a Dell Vostro w/ 4gRAM, Dual Core processor and it is
pretty
fast (although with all of the programs - boots a little slow).

Again, thanks so much for your suggestions.



  #11  
Old June 8th 09, 03:02 AM posted to microsoft.public.windowsxp.basics
DL[_3_]
external usenet poster
 
Posts: 929
Default Multiple configurations question

I have a Vostro with Vista Business, it runs fine

wrote in message
...
Thanks for the further information. I guess I will be pushed to Vista if
it
will handle the bloat I usually have with my machines. I install many
programs - some I use occasionally, others often. ususlly I can max out a
40
gig frive with software. I have not heard anything about Win 7, but what I
heard about Vista has kept me with XP (thank goodness Dell sells XP
machines). If I can have it all on one machine - that would be good - but
the Vista bad news regarding slowness and bugs has me hesitant to move to
that OS. I have a Dell Vostro w/ 4gRAM, Dual Core processor and it is
pretty
fast (although with all of the programs - boots a little slow).

Again, thanks so much for your suggestions.



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off






All times are GMT +1. The time now is 04:10 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 PCbanter.
The comments are property of their posters.