If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Please Help!
i do not fully understand this problem but here goes information about my
system is below (its long winded but please, comments are welcome on this) ..firstly whenever i try to use the back up too i get the following error Error returned while creating the volume shadow copy:80042301 Operation Failed. i read other forums telling me to enable the COM+ system, which in the computer management section is set to manual and when i try to enable them its like they dont exsist COM+ Event System Error : 126 the specific module could not be found COM+ System Application Error: 1067 The Process Terminated Unexpectedly so with that in mind that COM+ doesnt seem to work, i noticed the following errors everytime my pc starts i found this in the Event Viewer of my system In Application- All the errors are COM+ related here are some examples 1. Error 22:47:23 THE RUN TIME ENVIROMENT HAS DETECTED AN INCONSISTENCE IN ITS INTERNAL STATE. THIS INDICATES A POTENTIAL INSTABILLITY IN THE PROCESS THAT COULD BE CAUSED BY CUSTOM COMPONENTS RUNNING IN THE COM+ APPLICATION 2. Warning 22:47:23 FAILED TO CREATE EVENT CLASS 3. Error 22:47:23 A CONDITION OCCURED THAT INDICATED THIS COM+ APPLICATION IS IN AN UNSTABLE STATE THE SERIOUS NATURE OF THIS ERROR HAS CAUSE THE PROCESS TO TERMINATE ERROR CODE = 0X8000FFFF : CATASTROPHIC FAILURE .. in the system area of the management area, this error is reported upon computer startup The COME+ Event System service terminated with the following error the specified module could not be found The COM+ system application service has terminated unexpectedly. it has done this 4 times the logs have reported errors with com+ for months but i have no idea on the severity of the situation or how to resolve it. If you require anymore information, more detailed information maybe just ask system configuration is below OS : windows xp home edition SP1 file system : NTFS 2 Western Digital Hard Drives (80gb/40Gb) type - OEM processor - AMD Athlon 2000+ 1.67Ghz Ram - 256MB Nvidia Geforce FX5200 more info avalible on demand thanks in advance |
Ads |
#2
|
|||
|
|||
Please Help!
How to clean up a damaged COM+ catalog
http://support.microsoft.com/default...b;en-us;315296 "empleh" wrote in message ... i do not fully understand this problem but here goes information about my system is below (its long winded but please, comments are welcome on this) .firstly whenever i try to use the back up too i get the following error Error returned while creating the volume shadow copy:80042301 Operation Failed. i read other forums telling me to enable the COM+ system, which in the computer management section is set to manual and when i try to enable them its like they dont exsist COM+ Event System Error : 126 the specific module could not be found COM+ System Application Error: 1067 The Process Terminated Unexpectedly so with that in mind that COM+ doesnt seem to work, i noticed the following errors everytime my pc starts i found this in the Event Viewer of my system In Application- All the errors are COM+ related here are some examples 1. Error 22:47:23 THE RUN TIME ENVIROMENT HAS DETECTED AN INCONSISTENCE IN ITS INTERNAL STATE. THIS INDICATES A POTENTIAL INSTABILLITY IN THE PROCESS THAT COULD BE CAUSED BY CUSTOM COMPONENTS RUNNING IN THE COM+ APPLICATION 2. Warning 22:47:23 FAILED TO CREATE EVENT CLASS 3. Error 22:47:23 A CONDITION OCCURED THAT INDICATED THIS COM+ APPLICATION IS IN AN UNSTABLE STATE THE SERIOUS NATURE OF THIS ERROR HAS CAUSE THE PROCESS TO TERMINATE ERROR CODE = 0X8000FFFF : CATASTROPHIC FAILURE . in the system area of the management area, this error is reported upon computer startup The COME+ Event System service terminated with the following error the specified module could not be found The COM+ system application service has terminated unexpectedly. it has done this 4 times the logs have reported errors with com+ for months but i have no idea on the severity of the situation or how to resolve it. If you require anymore information, more detailed information maybe just ask system configuration is below OS : windows xp home edition SP1 file system : NTFS 2 Western Digital Hard Drives (80gb/40Gb) type - OEM processor - AMD Athlon 2000+ 1.67Ghz Ram - 256MB Nvidia Geforce FX5200 more info avalible on demand thanks in advance |
#3
|
|||
|
|||
Please Help!
Thanks for your help Jon but the problem remains unsolved, i followed all
instructions step by step, but upon reinstalling the COM+ system i got the following error *COM SET-UP ERROR* SUB-COMPONENT COM+ RAISED AN EXCEPTION WHILE PROCESSING THE OC_COMPLETE_INSTALLATION SETUP MESSAGE. D:NT\COM\COM1X\SRC\COMPLUSSETUP\COMSETUP\CSETUPUTI L.CPP (LINE 3406) ERROR CODE = 0x8007007e THE SPECIFIED MODULE COULD NOT BE FOUND. FAILED TO LOAD THE LIBRARY 'C:\WINDOWS\SYSTEM32\ES.DLL i am clueless as too me it looks like COM+ does not exsist at all here |
#4
|
|||
|
|||
Please Help!
Here's information that suggests you should run "regsvr32ole32.dll" as a fix
(Start Run - enter REGSVR32 OLE32.DLL) http://www.byfai.com/backupvss.php "empleh" wrote in message news Thanks for your help Jon but the problem remains unsolved, i followed all instructions step by step, but upon reinstalling the COM+ system i got the following error *COM SET-UP ERROR* SUB-COMPONENT COM+ RAISED AN EXCEPTION WHILE PROCESSING THE OC_COMPLETE_INSTALLATION SETUP MESSAGE. D:NT\COM\COM1X\SRC\COMPLUSSETUP\COMSETUP\CSETUPUTI L.CPP (LINE 3406) ERROR CODE = 0x8007007e THE SPECIFIED MODULE COULD NOT BE FOUND. FAILED TO LOAD THE LIBRARY 'C:\WINDOWS\SYSTEM32\ES.DLL i am clueless as too me it looks like COM+ does not exsist at all here |
#5
|
|||
|
|||
Please Help!
thanks again for your help so far. the operation was sucessful as in running
the command however. The com system still fails to start only with a different error message for COM+System Application Error 1053: The service did not respond to the start or control request in a timely fashion The error for COM+ Event System states Error 126 : The Specified Module Could Not Be Found. Although i am aware of the reinstallation of windows would most likely repair the problem, my system is an OEM and i have no windows disc. My system is a packard bell and i have master cd's but require software which is missing to use it to reinstall windows. Are there any other ways? |
#6
|
|||
|
|||
Please Help!
You might try the steps listed under "Problem Diagnosis and Troubleshooting"
@ http://support.microsoft.com/default...b;en-us;246499 Also, this problem may well have been the result of a virus,of some type so you might first thoroughly scan your system. Trend Micro free online scan http://housecall.trendmicro.com/ "empleh" wrote in message ... thanks again for your help so far. the operation was sucessful as in running the command however. The com system still fails to start only with a different error message for COM+System Application Error 1053: The service did not respond to the start or control request in a timely fashion The error for COM+ Event System states Error 126 : The Specified Module Could Not Be Found. Although i am aware of the reinstallation of windows would most likely repair the problem, my system is an OEM and i have no windows disc. My system is a packard bell and i have master cd's but require software which is missing to use it to reinstall windows. Are there any other ways? |
#7
|
|||
|
|||
Please Help!
Thanks again for your help, i tried looking into the error given on setup
stating the following file could not be found, a file named es.dll i tried looking for this file, found it sucessfully and now the COM+ system starts sucessfully. I beleive for now all is well with the problem, thanks again for all your help id have gotten no where without it. Thanks |
#8
|
|||
|
|||
Please Help!
Glad to hear it
"empleh" wrote in message ... Thanks again for your help, i tried looking into the error given on setup stating the following file could not be found, a file named es.dll i tried looking for this file, found it sucessfully and now the COM+ system starts sucessfully. I beleive for now all is well with the problem, thanks again for all your help id have gotten no where without it. Thanks |
Thread Tools | |
Display Modes | |
|
|