My network places - no information

i replaced a motherboard (and memory) after a memory failure and repaired the
XPSP2 Pro installation.

Computer is part of a home network with a dlink router

All applications etc work but when i open My Network Places, there is
nothing displayed in window.

I can ping other computers by name and ip address
All computers are on same workgroup and within the router ip address range.
all have the same subgroupo 255.255.255.0

I cannot add a network place either by ip address or name
Also when browsing to add a network place, the selection does not show the
Microsoft Windows Network field.

Trying to select show computers in workgroup also does not display any result.

Other computers can access my computer and shares as previously
I can access the web correctly

I have tried with both simple file sharing selected /not selected and have
the NETBUI - TCP/IP switch on for the network protocol

I hace replaced the network card with the same result

extensive searching thw web has not produced any answers so i am seeking
help to correct this anomoly. As background i have set up at laest 20
networks both workgroups and domains

I have exactly the same problem. have you been able to find any solution to
it yet.

"malc t" wrote:

i replaced a motherboard (and memory) after a memory failure and repaired the
XPSP2 Pro installation.

Computer is part of a home network with a dlink router

All applications etc work but when i open My Network Places, there is
nothing displayed in window.

I can ping other computers by name and ip address
All computers are on same workgroup and within the router ip address range.
all have the same subgroupo 255.255.255.0

I cannot add a network place either by ip address or name
Also when browsing to add a network place, the selection does not show the
Microsoft Windows Network field.

Trying to select show computers in workgroup also does not display any result.

Other computers can access my computer and shares as previously
I can access the web correctly

I have tried with both simple file sharing selected /not selected and have
the NETBUI - TCP/IP switch on for the network protocol

I hace replaced the network card with the same result

extensive searching thw web has not produced any answers so i am seeking
help to correct this anomoly. As background i have set up at laest 20
networks both workgroups and domains

This is the solution:
www.careyholzman.com/net1.htm

Carey

"jimf" wrote in message
news
I have exactly the same problem. have you been able to find any solution
to
it yet.

"malc t" wrote:

i replaced a motherboard (and memory) after a memory failure and repaired
the
XPSP2 Pro installation.

Computer is part of a home network with a dlink router

All applications etc work but when i open My Network Places, there is
nothing displayed in window.

I can ping other computers by name and ip address
All computers are on same workgroup and within the router ip address
range.
all have the same subgroupo 255.255.255.0

I cannot add a network place either by ip address or name
Also when browsing to add a network place, the selection does not show
the
Microsoft Windows Network field.

Trying to select show computers in workgroup also does not display any
result.

Other computers can access my computer and shares as previously
I can access the web correctly

I have tried with both simple file sharing selected /not selected and
have
the NETBUI - TCP/IP switch on for the network protocol

I hace replaced the network card with the same result

extensive searching thw web has not produced any answers so i am seeking
help to correct this anomoly. As background i have set up at laest 20
networks both workgroups and domains

Carey

I had previuosly found your site and followed instructions fully. Have
again followed instaructions but problem still exists

malc t

"Carey Holzman" wrote:

This is the solution:
www.careyholzman.com/net1.htm

Carey

"jimf" wrote in message
news
I have exactly the same problem. have you been able to find any solution
to
it yet.

"malc t" wrote:

i replaced a motherboard (and memory) after a memory failure and repaired
the
XPSP2 Pro installation.

Computer is part of a home network with a dlink router

All applications etc work but when i open My Network Places, there is
nothing displayed in window.

I can ping other computers by name and ip address
All computers are on same workgroup and within the router ip address
range.
all have the same subgroupo 255.255.255.0

I cannot add a network place either by ip address or name
Also when browsing to add a network place, the selection does not show
the
Microsoft Windows Network field.

Trying to select show computers in workgroup also does not display any
result.

Other computers can access my computer and shares as previously
I can access the web correctly

I have tried with both simple file sharing selected /not selected and
have
the NETBUI - TCP/IP switch on for the network protocol

I hace replaced the network card with the same result

extensive searching thw web has not produced any answers so i am seeking
help to correct this anomoly. As background i have set up at laest 20
networks both workgroups and domains

May be a bad/incompatible switch...

Carey

"malc t" malc wrote in message
...
Carey

I had previuosly found your site and followed instructions fully. Have
again followed instaructions but problem still exists

malc t

"Carey Holzman" wrote:

This is the solution:
www.careyholzman.com/net1.htm

Carey

"jimf" wrote in message
news
I have exactly the same problem. have you been able to find any
solution
to
it yet.

"malc t" wrote:

i replaced a motherboard (and memory) after a memory failure and
repaired
the
XPSP2 Pro installation.

Computer is part of a home network with a dlink router

All applications etc work but when i open My Network Places, there is
nothing displayed in window.

I can ping other computers by name and ip address
All computers are on same workgroup and within the router ip address
range.
all have the same subgroupo 255.255.255.0

I cannot add a network place either by ip address or name
Also when browsing to add a network place, the selection does not show
the
Microsoft Windows Network field.

Trying to select show computers in workgroup also does not display any
result.

Other computers can access my computer and shares as previously
I can access the web correctly

I have tried with both simple file sharing selected /not selected and
have
the NETBUI - TCP/IP switch on for the network protocol

I hace replaced the network card with the same result

extensive searching thw web has not produced any answers so i am
seeking
help to correct this anomoly. As background i have set up at laest 20
networks both workgroups and domains

Do you mean the Dlink. If not which switch

malc t

"Carey Holzman" wrote:

May be a bad/incompatible switch...

Carey

"malc t" malc wrote in message
...
Carey

I had previuosly found your site and followed instructions fully. Have
again followed instaructions but problem still exists

malc t

"Carey Holzman" wrote:

This is the solution:
www.careyholzman.com/net1.htm

Carey

"jimf" wrote in message
news I have exactly the same problem. have you been able to find any
solution
to
it yet.

"malc t" wrote:

i replaced a motherboard (and memory) after a memory failure and
repaired
the
XPSP2 Pro installation.

Computer is part of a home network with a dlink router

All applications etc work but when i open My Network Places, there is
nothing displayed in window.

I can ping other computers by name and ip address
All computers are on same workgroup and within the router ip address
range.
all have the same subgroupo 255.255.255.0

I cannot add a network place either by ip address or name
Also when browsing to add a network place, the selection does not show
the
Microsoft Windows Network field.

Trying to select show computers in workgroup also does not display any
result.

Other computers can access my computer and shares as previously
I can access the web correctly

I have tried with both simple file sharing selected /not selected and
have
the NETBUI - TCP/IP switch on for the network protocol

I hace replaced the network card with the same result

extensive searching thw web has not produced any answers so i am
seeking
help to correct this anomoly. As background i have set up at laest 20
networks both workgroups and domains

Any router/switch involved...

Carey

"malc t" malc wrote in message
...
Do you mean the Dlink. If not which switch

malc t

"Carey Holzman" wrote:

May be a bad/incompatible switch...

Carey

"malc t" malc wrote in message
...
Carey

I had previuosly found your site and followed instructions fully. Have
again followed instaructions but problem still exists

malc t

"Carey Holzman" wrote:

This is the solution:
www.careyholzman.com/net1.htm

Carey

"jimf" wrote in message
news I have exactly the same problem. have you been able to find any
solution
to
it yet.

"malc t" wrote:

i replaced a motherboard (and memory) after a memory failure and
repaired
the
XPSP2 Pro installation.

Computer is part of a home network with a dlink router

All applications etc work but when i open My Network Places, there
is
nothing displayed in window.

I can ping other computers by name and ip address
All computers are on same workgroup and within the router ip
address
range.
all have the same subgroupo 255.255.255.0

I cannot add a network place either by ip address or name
Also when browsing to add a network place, the selection does not
show
the
Microsoft Windows Network field.

Trying to select show computers in workgroup also does not display
any
result.

Other computers can access my computer and shares as previously
I can access the web correctly

I have tried with both simple file sharing selected /not selected
and
have
the NETBUI - TCP/IP switch on for the network protocol

I hace replaced the network card with the same result

extensive searching thw web has not produced any answers so i am
seeking
help to correct this anomoly. As background i have set up at laest
20
networks both workgroups and domains

my router is a dLink 704 and has not changed. i will try with fixed ip and
netgear hub to see if it works but i doubt it as i cannot see the local
computer which is typical if the problem is external to the computer. past
experience has shown that a change of network card has cured the missing
computers but this has not worked. I removed all old entries in the registry
to nsure a clean installation - also to no avail. a pointer may be that the
"Microsfot windows network" folder does not appear in any of the links where
browsing is required eg add network place or search browse.

"Carey Holzman" wrote:

Any router/switch involved...

Carey

"malc t" malc wrote in message
...
Do you mean the Dlink. If not which switch

malc t

"Carey Holzman" wrote:

May be a bad/incompatible switch...

Carey

"malc t" malc wrote in message
...
Carey

I had previuosly found your site and followed instructions fully. Have
again followed instaructions but problem still exists

malc t

"Carey Holzman" wrote:

This is the solution:
www.careyholzman.com/net1.htm

Carey

"jimf" wrote in message
news I have exactly the same problem. have you been able to find any
solution
to
it yet.

"malc t" wrote:

i replaced a motherboard (and memory) after a memory failure and
repaired
the
XPSP2 Pro installation.

Computer is part of a home network with a dlink router

All applications etc work but when i open My Network Places, there
is
nothing displayed in window.

I can ping other computers by name and ip address
All computers are on same workgroup and within the router ip
address
range.
all have the same subgroupo 255.255.255.0

I cannot add a network place either by ip address or name
Also when browsing to add a network place, the selection does not
show
the
Microsoft Windows Network field.

Trying to select show computers in workgroup also does not display
any
result.

Other computers can access my computer and shares as previously
I can access the web correctly

I have tried with both simple file sharing selected /not selected
and
have
the NETBUI - TCP/IP switch on for the network protocol

I hace replaced the network card with the same result

extensive searching thw web has not produced any answers so i am
seeking
help to correct this anomoly. As background i have set up at laest
20
networks both workgroups and domains