If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
sATA hotplug Disk is not shown after disconnect
Hello
Asus P5MT-MX/C with ich7R Chipsatz from Intel System: Windows 2003 Server The problem is: If the Harddisk is disconnected (sATA Hotplug Frame) and then reconnected it is not shown in the device manager and the device is not shown in explorer. It becomes present if I manually search for PnP devices in the Intel matrix Raid manager. But the Harddisk should be present on its own without manual interaction Any idea what to do? Thanks for the help!!! And sorry for the german posting ;-)) Ciao MIchael |
Ads |
#2
|
|||
|
|||
sATA hotplug Disk is not shown after disconnect
With 2003 you should/might look into microsofts MOM software,it has
utilities and software just for 03 "MIchael" wrote: Hello Asus P5MT-MX/C with ich7R Chipsatz from Intel System: Windows 2003 Server The problem is: If the Harddisk is disconnected (sATA Hotplug Frame) and then reconnected it is not shown in the device manager and the device is not shown in explorer. It becomes present if I manually search for PnP devices in the Intel matrix Raid manager. But the Harddisk should be present on its own without manual interaction Any idea what to do? Thanks for the help!!! And sorry for the german posting ;-)) Ciao MIchael |
#3
|
|||
|
|||
sATA hotplug Disk is not shown after disconnect
"MIchael" wrote in message
... Hello Asus P5MT-MX/C with ich7R Chipsatz from Intel System: Windows 2003 Server The problem is: If the Harddisk is disconnected (sATA Hotplug Frame) and then reconnected it is not shown in the device manager and the device is not shown in explorer. It becomes present if I manually search for PnP devices in the Intel matrix Raid manager. But the Harddisk should be present on its own without manual interaction Any idea what to do? Thanks for the help!!! And sorry for the german posting ;-)) Ciao MIchael Your problem is either with: (1.) the MoBo Chipset driver; or (2.) the Intel matrix Raid manager; or (3.) Windows 2003 None of those three possibilities are in any way related to Windows XP Hardware, which is where you have posted. Steve |
Thread Tools | |
Display Modes | |
|
|