Error message and unknown file

Two questions:

1. I keep getting a message that says ,"Error loading: C:\Program
Files\Common Files\Paretologic\UU2.dll specified mode nodule could not be
found. Can anyone tell me what this means and if there is a way to fix it
please?

2. I just installed an external disk (WD 320GB Passport Essential USB 2.0
Portable disk) and when I loaded it onto my computer and go to the external
disk, there are mostly files that begin with a number and then end with dml,
such as 91.dml. Can someone tell me what these files are and how do I access
them (if I need to access them). Also, whenever I make a new graphic, I
automatically save it in the external drive, but then when I go to retrieve
it in my PSP X2, I can't find it.

Would definitely appreciate any help/explanation of these questions.

Thanks,

Paula
--
Paula

Paula

You most likely have installed and uninstalled this software. When
removing the startup item has not been rmoved but UU2.dll has. You can
use Autoruns to locate and remove the startup item.
http://www.paretologic.com/

To identify what loads when you boot use Autoruns (freeware from
Microsoft).
http://www.microsoft.com/technet/sys.../Autoruns.mspx

With Autoruns you can uncheck an item, which disables it from
starting,or you can right click an item and then delete it. If you
uncheck you can recheck to re-enable the item. It is a much safer
approach than editing the Registry and better than using msconfig..
Another useful feature of the programme is that you can right click an
item and select Search Online to get information about the item
selected.

In Window Explorer right click on a dml file and select properties. You
should get clues as to the source. Otherwise the next link may help.
http://filext.com/file-extension/dml

--


Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~

paulavac wrote:
Two questions:

1. I keep getting a message that says ,"Error loading: C:\Program
Files\Common Files\Paretologic\UU2.dll specified mode nodule could
not be found. Can anyone tell me what this means and if there is a
way to fix it please?

2. I just installed an external disk (WD 320GB Passport Essential USB
2.0 Portable disk) and when I loaded it onto my computer and go to
the external disk, there are mostly files that begin with a number
and then end with dml, such as 91.dml. Can someone tell me what
these files are and how do I access them (if I need to access them).
Also, whenever I make a new graphic, I automatically save it in the
external drive, but then when I go to retrieve it in my PSP X2, I
can't find it.

Would definitely appreciate any help/explanation of these questions.

Thanks,

Paula

Paula

You most likely have installed and uninstalled this software. When
removing the startup item has not been rmoved but UU2.dll has. You can
use Autoruns to locate and remove the startup item.
http://www.paretologic.com/

To identify what loads when you boot use Autoruns (freeware from
Microsoft).
http://www.microsoft.com/technet/sys.../Autoruns.mspx

With Autoruns you can uncheck an item, which disables it from
starting,or you can right click an item and then delete it. If you
uncheck you can recheck to re-enable the item. It is a much safer
approach than editing the Registry and better than using msconfig..
Another useful feature of the programme is that you can right click an
item and select Search Online to get information about the item
selected.

In Window Explorer right click on a dml file and select properties. You
should get clues as to the source. Otherwise the next link may help.
http://filext.com/file-extension/dml

--


Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~

paulavac wrote:
Two questions:

1. I keep getting a message that says ,"Error loading: C:\Program
Files\Common Files\Paretologic\UU2.dll specified mode nodule could
not be found. Can anyone tell me what this means and if there is a
way to fix it please?

2. I just installed an external disk (WD 320GB Passport Essential USB
2.0 Portable disk) and when I loaded it onto my computer and go to
the external disk, there are mostly files that begin with a number
and then end with dml, such as 91.dml. Can someone tell me what
these files are and how do I access them (if I need to access them).
Also, whenever I make a new graphic, I automatically save it in the
external drive, but then when I go to retrieve it in my PSP X2, I
can't find it.

Would definitely appreciate any help/explanation of these questions.

Thanks,

Paula

Gerry,

I ran this link:
http://www.microsoft.com/technet/sys.../Autoruns.mspx
and I have absolutely no way of making heads or tails out of the information
it gave me - I simply don't know what to do with it at this point.

Also when I ran this: http://www.paretologic.com/

it showed that I still had rootkit in one of my temporary files but the site
wanted payment in order to clean it and I simply don't have any money left to
pay for anymore protection for my computer (I have $10 to last me the rest of
the momth).

I will try to run mcro trend again and see if it picks it up; if it doesn't
I don't know what to do.

Thanks,
--
Paula


"Gerry" wrote:

Paula

You most likely have installed and uninstalled this software. When
removing the startup item has not been rmoved but UU2.dll has. You can
use Autoruns to locate and remove the startup item.
http://www.paretologic.com/

To identify what loads when you boot use Autoruns (freeware from
Microsoft).
http://www.microsoft.com/technet/sys.../Autoruns.mspx

With Autoruns you can uncheck an item, which disables it from
starting,or you can right click an item and then delete it. If you
uncheck you can recheck to re-enable the item. It is a much safer
approach than editing the Registry and better than using msconfig..
Another useful feature of the programme is that you can right click an
item and select Search Online to get information about the item
selected.

In Window Explorer right click on a dml file and select properties. You
should get clues as to the source. Otherwise the next link may help.
http://filext.com/file-extension/dml

--


Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~

paulavac wrote:
Two questions:

1. I keep getting a message that says ,"Error loading: C:\Program
Files\Common Files\Paretologic\UU2.dll specified mode nodule could
not be found. Can anyone tell me what this means and if there is a
way to fix it please?

2. I just installed an external disk (WD 320GB Passport Essential USB
2.0 Portable disk) and when I loaded it onto my computer and go to
the external disk, there are mostly files that begin with a number
and then end with dml, such as 91.dml. Can someone tell me what
these files are and how do I access them (if I need to access them).
Also, whenever I make a new graphic, I automatically save it in the
external drive, but then when I go to retrieve it in my PSP X2, I
can't find it.

Would definitely appreciate any help/explanation of these questions.

Thanks,

Paula

Gerry,

I ran this link:
http://www.microsoft.com/technet/sys.../Autoruns.mspx
and I have absolutely no way of making heads or tails out of the information
it gave me - I simply don't know what to do with it at this point.

Also when I ran this: http://www.paretologic.com/

it showed that I still had rootkit in one of my temporary files but the site
wanted payment in order to clean it and I simply don't have any money left to
pay for anymore protection for my computer (I have $10 to last me the rest of
the momth).

I will try to run mcro trend again and see if it picks it up; if it doesn't
I don't know what to do.

Thanks,
--
Paula


"Gerry" wrote:

Paula

You most likely have installed and uninstalled this software. When
removing the startup item has not been rmoved but UU2.dll has. You can
use Autoruns to locate and remove the startup item.
http://www.paretologic.com/

To identify what loads when you boot use Autoruns (freeware from
Microsoft).
http://www.microsoft.com/technet/sys.../Autoruns.mspx

With Autoruns you can uncheck an item, which disables it from
starting,or you can right click an item and then delete it. If you
uncheck you can recheck to re-enable the item. It is a much safer
approach than editing the Registry and better than using msconfig..
Another useful feature of the programme is that you can right click an
item and select Search Online to get information about the item
selected.

In Window Explorer right click on a dml file and select properties. You
should get clues as to the source. Otherwise the next link may help.
http://filext.com/file-extension/dml

--


Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~

paulavac wrote:
Two questions:

1. I keep getting a message that says ,"Error loading: C:\Program
Files\Common Files\Paretologic\UU2.dll specified mode nodule could
not be found. Can anyone tell me what this means and if there is a
way to fix it please?

2. I just installed an external disk (WD 320GB Passport Essential USB
2.0 Portable disk) and when I loaded it onto my computer and go to
the external disk, there are mostly files that begin with a number
and then end with dml, such as 91.dml. Can someone tell me what
these files are and how do I access them (if I need to access them).
Also, whenever I make a new graphic, I automatically save it in the
external drive, but then when I go to retrieve it in my PSP X2, I
can't find it.

Would definitely appreciate any help/explanation of these questions.

Thanks,

Paula

Paula

One of the columns in Autoruns is Image Path. Selecting the "Everything"
tab scan down the Image Path column and you should find "C:\Program
Files\Common Files\Paretologic\UU2.dll". Disable the item and restart
the computer. It should stop the error. However, whenever making changes
you should monitor the system for a day or so to make sure there are no
adverse affects. If there were you can easily reverse the change.


--


Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~

paulavac wrote:
Gerry,

I ran this link:
http://www.microsoft.com/technet/sys.../Autoruns.mspx
and I have absolutely no way of making heads or tails out of the
information it gave me - I simply don't know what to do with it at
this point.

Also when I ran this: http://www.paretologic.com/

it showed that I still had rootkit in one of my temporary files but
the site wanted payment in order to clean it and I simply don't have
any money left to pay for anymore protection for my computer (I have
$10 to last me the rest of the momth).

I will try to run mcro trend again and see if it picks it up; if it
doesn't I don't know what to do.

Thanks,

Paula

You most likely have installed and uninstalled this software. When
removing the startup item has not been rmoved but UU2.dll has. You
can use Autoruns to locate and remove the startup item.
http://www.paretologic.com/

To identify what loads when you boot use Autoruns (freeware from
Microsoft).
http://www.microsoft.com/technet/sys.../Autoruns.mspx

With Autoruns you can uncheck an item, which disables it from
starting,or you can right click an item and then delete it. If you
uncheck you can recheck to re-enable the item. It is a much safer
approach than editing the Registry and better than using msconfig..
Another useful feature of the programme is that you can right click
an item and select Search Online to get information about the item
selected.

In Window Explorer right click on a dml file and select properties.
You should get clues as to the source. Otherwise the next link may
help. http://filext.com/file-extension/dml

--


Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~

paulavac wrote:
Two questions:

1. I keep getting a message that says ,"Error loading: C:\Program
Files\Common Files\Paretologic\UU2.dll specified mode nodule could
not be found. Can anyone tell me what this means and if there is a
way to fix it please?

2. I just installed an external disk (WD 320GB Passport Essential
USB
2.0 Portable disk) and when I loaded it onto my computer and go to
the external disk, there are mostly files that begin with a number
and then end with dml, such as 91.dml. Can someone tell me what
these files are and how do I access them (if I need to access them).
Also, whenever I make a new graphic, I automatically save it in the
external drive, but then when I go to retrieve it in my PSP X2, I
can't find it.

Would definitely appreciate any help/explanation of these questions.

Thanks,

Paula

Paula

One of the columns in Autoruns is Image Path. Selecting the "Everything"
tab scan down the Image Path column and you should find "C:\Program
Files\Common Files\Paretologic\UU2.dll". Disable the item and restart
the computer. It should stop the error. However, whenever making changes
you should monitor the system for a day or so to make sure there are no
adverse affects. If there were you can easily reverse the change.


--


Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~

paulavac wrote:
Gerry,

I ran this link:
http://www.microsoft.com/technet/sys.../Autoruns.mspx
and I have absolutely no way of making heads or tails out of the
information it gave me - I simply don't know what to do with it at
this point.

Also when I ran this: http://www.paretologic.com/

it showed that I still had rootkit in one of my temporary files but
the site wanted payment in order to clean it and I simply don't have
any money left to pay for anymore protection for my computer (I have
$10 to last me the rest of the momth).

I will try to run mcro trend again and see if it picks it up; if it
doesn't I don't know what to do.

Thanks,

Paula

You most likely have installed and uninstalled this software. When
removing the startup item has not been rmoved but UU2.dll has. You
can use Autoruns to locate and remove the startup item.
http://www.paretologic.com/

To identify what loads when you boot use Autoruns (freeware from
Microsoft).
http://www.microsoft.com/technet/sys.../Autoruns.mspx

With Autoruns you can uncheck an item, which disables it from
starting,or you can right click an item and then delete it. If you
uncheck you can recheck to re-enable the item. It is a much safer
approach than editing the Registry and better than using msconfig..
Another useful feature of the programme is that you can right click
an item and select Search Online to get information about the item
selected.

In Window Explorer right click on a dml file and select properties.
You should get clues as to the source. Otherwise the next link may
help. http://filext.com/file-extension/dml

--


Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~

paulavac wrote:
Two questions:

1. I keep getting a message that says ,"Error loading: C:\Program
Files\Common Files\Paretologic\UU2.dll specified mode nodule could
not be found. Can anyone tell me what this means and if there is a
way to fix it please?

2. I just installed an external disk (WD 320GB Passport Essential
USB
2.0 Portable disk) and when I loaded it onto my computer and go to
the external disk, there are mostly files that begin with a number
and then end with dml, such as 91.dml. Can someone tell me what
these files are and how do I access them (if I need to access them).
Also, whenever I make a new graphic, I automatically save it in the
external drive, but then when I go to retrieve it in my PSP X2, I
can't find it.

Would definitely appreciate any help/explanation of these questions.

Thanks,

Paula

"paulavac" wrote in message
...
Two questions:

1. I keep getting a message that says ,"Error loading: C:\Program
Files\Common Files\Paretologic\UU2.dll specified mode nodule could not be
found. Can anyone tell me what this means and if there is a way to fix it
please?

2. I just installed an external disk (WD 320GB Passport Essential USB 2.0
Portable disk) and when I loaded it onto my computer and go to the external
disk, there are mostly files that begin with a number and then end with dml,
such as 91.dml. Can someone tell me what these files are and how do I
access
them (if I need to access them). Also, whenever I make a new graphic, I
automatically save it in the external drive, but then when I go to retrieve
it in my PSP X2, I can't find it.

Would definitely appreciate any help/explanation of these questions.

Thanks,

Paula
--
Paula

================================================== =======

Hi Paula,

It's left over from a program you had on the computer that has now being
uninstalled.

Try this;

A task has been left behind by the Paretologic Program in the task manager's
files that is responsible for this annoying error..to fix ..go to START
...ACCESSORIES .. SYSTEM TOOLS ..click on ..SCHEDULE TASKS and delete any
tasks that concern Paretologic.


--
Regards,
Touch Base
Report back on the results, good or bad so others may benefit

"paulavac" wrote in message
...
Two questions:

1. I keep getting a message that says ,"Error loading: C:\Program
Files\Common Files\Paretologic\UU2.dll specified mode nodule could not be
found. Can anyone tell me what this means and if there is a way to fix it
please?

2. I just installed an external disk (WD 320GB Passport Essential USB 2.0
Portable disk) and when I loaded it onto my computer and go to the external
disk, there are mostly files that begin with a number and then end with dml,
such as 91.dml. Can someone tell me what these files are and how do I
access
them (if I need to access them). Also, whenever I make a new graphic, I
automatically save it in the external drive, but then when I go to retrieve
it in my PSP X2, I can't find it.

Would definitely appreciate any help/explanation of these questions.

Thanks,

Paula
--
Paula

================================================== =======

Hi Paula,

It's left over from a program you had on the computer that has now being
uninstalled.

Try this;

A task has been left behind by the Paretologic Program in the task manager's
files that is responsible for this annoying error..to fix ..go to START
...ACCESSORIES .. SYSTEM TOOLS ..click on ..SCHEDULE TASKS and delete any
tasks that concern Paretologic.


--
Regards,
Touch Base
Report back on the results, good or bad so others may benefit

Gerry's suggestion of going to http://www.microsoft.com/technet/sys.../Autoruns.mspx
was just what the Dr. ordered. Today was the first time I have ever been to this site, now I'm a member.
People helping people just for the sake of mankind.

I absolutely love to help others and get the same pleasure reading about someone trying to do good.
Kudos all the way around! Beers are on me!

Be Safe, -tom2-



Touch Base wrote:

Error message and unknown file
22-Aug-09

Two questions:

1. I keep getting a message that says ,"Error loading: C:\Program
Files\Common Files\Paretologic\UU2.dll specified mode nodule could not be
found. Can anyone tell me what this means and if there is a way to fix it
please?

2. I just installed an external disk (WD 320GB Passport Essential USB 2.0
Portable disk) and when I loaded it onto my computer and go to the external
disk, there are mostly files that begin with a number and then end with dml,
such as 91.dml. Can someone tell me what these files are and how do I
access
them (if I need to access them). Also, whenever I make a new graphic, I
automatically save it in the external drive, but then when I go to retrieve
it in my PSP X2, I cannot find it.

Would definitely appreciate any help/explanation of these questions.

Thanks,

Paula
--
Paula

================================================== =======

Hi Paula,

it is left over from a program you had on the computer that has now being
uninstalled.

Try this;

A task has been left behind by the Paretologic Program in the task manager's
files that is responsible for this annoying error..to fix ..go to START
...ACCESSORIES .. SYSTEM TOOLS ..click on ..SCHEDULE TASKS and delete any
tasks that concern Paretologic.


--
Regards,
Touch Base
Report back on the results, good or bad so others may benefit

Previous Posts In This Thread:

On Monday, August 17, 2009 6:03 AM
paulavac wrote:

Error message and unknown file
Two questions:

1. I keep getting a message that says ,"Error loading: C:\Program
Files\Common Files\Paretologic\UU2.dll specified mode nodule could not be
found. Can anyone tell me what this means and if there is a way to fix it
please?

2. I just installed an external disk (WD 320GB Passport Essential USB 2.0
Portable disk) and when I loaded it onto my computer and go to the external
disk, there are mostly files that begin with a number and then end with dml,
such as 91.dml. Can someone tell me what these files are and how do I access
them (if I need to access them). Also, whenever I make a new graphic, I
automatically save it in the external drive, but then when I go to retrieve
it in my PSP X2, I cannot find it.

Would definitely appreciate any help/explanation of these questions.

Thanks,

Paula
--
Paula

On Monday, August 17, 2009 6:43 AM
Gerry wrote:

PaulaYou most likely have installed and uninstalled this software.
Paula

You most likely have installed and uninstalled this software. When
removing the startup item has not been rmoved but UU2.dll has. You can
use Autoruns to locate and remove the startup item.
http://www.paretologic.com/

To identify what loads when you boot use Autoruns (freeware from
Microsoft).
http://www.microsoft.com/technet/sys.../Autoruns.mspx

With Autoruns you can uncheck an item, which disables it from
starting,or you can right click an item and then delete it. If you
uncheck you can recheck to re-enable the item. It is a much safer
approach than editing the Registry and better than using msconfig..
Another useful feature of the programme is that you can right click an
item and select Search Online to get information about the item
selected.

In Window Explorer right click on a dml file and select properties. You
should get clues as to the source. Otherwise the next link may help.
http://filext.com/file-extension/dml

--


Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~

paulavac wrote:

On Tuesday, August 18, 2009 3:10 AM
paulavac wrote:

Error message and unknown file
Gerry,

I ran this link:
http://www.microsoft.com/technet/sys.../Autoruns.mspx
and I have absolutely no way of making heads or tails out of the information
it gave me - I simply do not know what to do with it at this point.

Also when I ran this: http://www.paretologic.com/

it showed that I still had rootkit in one of my temporary files but the site
wanted payment in order to clean it and I simply do not have any money left to
pay for anymore protection for my computer (I have $10 to last me the rest of
the momth).

I will try to run mcro trend again and see if it picks it up; if it does not
I do not know what to do.

Thanks,
--
Paula


"Gerry" wrote:

On Tuesday, August 18, 2009 4:14 AM
Gerry wrote:

PaulaOne of the columns in Autoruns is Image Path.
Paula

One of the columns in Autoruns is Image Path. Selecting the "Everything"
tab scan down the Image Path column and you should find "C:\Program
Files\Common Files\Paretologic\UU2.dll". Disable the item and restart
the computer. It should stop the error. However, whenever making changes
you should monitor the system for a day or so to make sure there are no
adverse affects. If there were you can easily reverse the change.


--


Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~

paulavac wrote:

On Saturday, August 22, 2009 3:28 PM
Touch Base wrote:

Error message and unknown file
Two questions:

1. I keep getting a message that says ,"Error loading: C:\Program
Files\Common Files\Paretologic\UU2.dll specified mode nodule could not be
found. Can anyone tell me what this means and if there is a way to fix it
please?

2. I just installed an external disk (WD 320GB Passport Essential USB 2.0
Portable disk) and when I loaded it onto my computer and go to the external
disk, there are mostly files that begin with a number and then end with dml,
such as 91.dml. Can someone tell me what these files are and how do I
access
them (if I need to access them). Also, whenever I make a new graphic, I
automatically save it in the external drive, but then when I go to retrieve
it in my PSP X2, I cannot find it.

Would definitely appreciate any help/explanation of these questions.

Thanks,

Paula
--
Paula

================================================== =======

Hi Paula,

it is left over from a program you had on the computer that has now being
uninstalled.

Try this;

A task has been left behind by the Paretologic Program in the task manager's
files that is responsible for this annoying error..to fix ..go to START
...ACCESSORIES .. SYSTEM TOOLS ..click on ..SCHEDULE TASKS and delete any
tasks that concern Paretologic.


--
Regards,
Touch Base
Report back on the results, good or bad so others may benefit


Submitted via EggHeadCafe - Software Developer Portal of Choice
Design Patterns for .NET
http://www.eggheadcafe.com/tutorials...s-for-net.aspx