If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
"Code 10" Error code in Device manager for Optorite D1601 DVD-RW
I am running SP1 Slipstreamed Windows XP Pro
The slipstreamed CD has all drivers included 2 x 40 GB Maxtor Hdd 2 x 256 MB PC3200 OCR DDR Memory ABIT NF7-S2 MB with Latest BIOS ATI Radeon 9600 128mb Video Card AMD Athlon XP 3200+ Processor Optorite Dual Layer DVD-RW Drive (D1601) No Floppy Drive I am able to boot from the DVD-RW Drive. I can load windows from the drive, and load all drivers. I only have one splat in the device manager. It is for the DVD-RW drive. It doesn't assign the drive a letter, and I am unable to access it in windows at all. I have tried the drive on IDE 1 and 2. As both Master and Slave. The BIOS detects the drive fine. Any suggestions would be greatly appreciated. |
Ads |
#2
|
|||
|
|||
"Code 10" Error code in Device manager for Optorite D1601 DVD-RW
BlueJay1839,
Absolutely make sure the ribbon cable is on correctly at both the ROM and the mobo and that it definitely has power. Nospam "BlueJay1839" wrote in message ... I am running SP1 Slipstreamed Windows XP Pro The slipstreamed CD has all drivers included 2 x 40 GB Maxtor Hdd 2 x 256 MB PC3200 OCR DDR Memory ABIT NF7-S2 MB with Latest BIOS ATI Radeon 9600 128mb Video Card AMD Athlon XP 3200+ Processor Optorite Dual Layer DVD-RW Drive (D1601) No Floppy Drive I am able to boot from the DVD-RW Drive. I can load windows from the drive, and load all drivers. I only have one splat in the device manager. It is for the DVD-RW drive. It doesn't assign the drive a letter, and I am unable to access it in windows at all. I have tried the drive on IDE 1 and 2. As both Master and Slave. The BIOS detects the drive fine. Any suggestions would be greatly appreciated. |
#3
|
|||
|
|||
"Code 10" Error code in Device manager for Optorite D1601 DVD-RW
That has absolutely nothing to do with it. There is no way you could
load Windows from the drive or have the BIOS use the drive properly if this was the case. Right click on the drive in Device Manager, click Uninstall, then reboot and let Windows reinstall the drive. If that doesn't fix it, post back ----- Nathan McNulty Nospam wrote: BlueJay1839, Absolutely make sure the ribbon cable is on correctly at both the ROM and the mobo and that it definitely has power. Nospam "BlueJay1839" wrote in message ... I am running SP1 Slipstreamed Windows XP Pro The slipstreamed CD has all drivers included 2 x 40 GB Maxtor Hdd 2 x 256 MB PC3200 OCR DDR Memory ABIT NF7-S2 MB with Latest BIOS ATI Radeon 9600 128mb Video Card AMD Athlon XP 3200+ Processor Optorite Dual Layer DVD-RW Drive (D1601) No Floppy Drive I am able to boot from the DVD-RW Drive. I can load windows from the drive, and load all drivers. I only have one splat in the device manager. It is for the DVD-RW drive. It doesn't assign the drive a letter, and I am unable to access it in windows at all. I have tried the drive on IDE 1 and 2. As both Master and Slave. The BIOS detects the drive fine. Any suggestions would be greatly appreciated. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Long boot pause with SATA boot drive | Randy | General XP issues or comments | 3 | September 1st 04 12:44 AM |
Device Manager error codes | Cyndy | General XP issues or comments | 1 | August 31st 04 09:36 PM |
Numerous Conflicts... | David Brown | Performance and Maintainance of XP | 1 | August 30th 04 03:35 AM |