A Windows XP help forum. PCbanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » PCbanter forum » Microsoft Windows XP » Networking and the Internet with Windows XP
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

network adapters



 
 
Thread Tools Display Modes
  #1  
Old December 5th 04, 02:40 PM
Rick and Deb
external usenet poster
 
Posts: n/a
Default network adapters

I have windows xp home sp1. When I go to safe mode, go to device manger, go
to network adapters it shows about 10 adapters in it. When I try to
uninstall it says " Failed to uninstall the device. The device may be
required to boot up computer.". I know at least 3 of them are network cards
that is not in the computer. My network stopped working is why I even looked
there. Any suggestions would be very helpful. Here is a list of adapters
that it shows that can not be uninstalled.

Network adapters:
Direct Parallel 5.1.2535.0
D-Link DFE-530TX+ PCI Adapter 5.397.823.2001
D-Link DFE-530TX+ PCI Adapter - Packet Scheduler Miniport5.1.2535.0
D-Link DFE-530TX+ PCI Adapter #2 - Packet Scheduler Miniport5.1.2535.0
Realtek RTL8139 Family PCI Fast Ethernet NIC - Packet Scheduler
Miniport5.1.2535.0
WAN Miniport (IP) 5.1.2535.0
WAN Miniport (IP) - Packet Scheduler Miniport 5.1.2535.0
WAN Miniport (IPX) 5.1.2535.0
WAN Miniport (L2TP) 5.1.2535.0
WAN Miniport (PPPOE) 5.1.2535.0
WAN Miniport (PPTP) 5.1.2535.0

Here is the IP report.

Windows IP Configuration Host Name . . . . . . . . . . . . : RICK
Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . .
.. : Broadcast IP Routing Enabled. . . . . . . . : No WINS
Proxy Enabled. . . . . . . . : NoEthernet adapter Local Area Connection 11:
Connection-specific DNS Suffix . : Description . . . . . . . . . .
.. : D-Link DFE-530TX+ PCI Adapter Physical Address. . . . . . . . . :
00-50-BA-AE-46-F1 Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . .
.. . : 0.0.0.0 Subnet Mask . . . . . . . . . . . : 0.0.0.0
Default Gateway . . . . . . . . . : DHCP Server . . . . . . . . . .
.. : 0.0.0.0




  #2  
Old December 5th 04, 04:43 PM
Chuck
external usenet poster
 
Posts: n/a
Default network adapters

On Sun, 5 Dec 2004 07:40:54 -0600, "Rick and Deb"
wrote:

I have windows xp home sp1. When I go to safe mode, go to device manger, go
to network adapters it shows about 10 adapters in it. When I try to
uninstall it says " Failed to uninstall the device. The device may be
required to boot up computer.". I know at least 3 of them are network cards
that is not in the computer. My network stopped working is why I even looked
there. Any suggestions would be very helpful. Here is a list of adapters
that it shows that can not be uninstalled.

Network adapters:
Direct Parallel 5.1.2535.0
D-Link DFE-530TX+ PCI Adapter 5.397.823.2001
D-Link DFE-530TX+ PCI Adapter - Packet Scheduler Miniport5.1.2535.0
D-Link DFE-530TX+ PCI Adapter #2 - Packet Scheduler Miniport5.1.2535.0
Realtek RTL8139 Family PCI Fast Ethernet NIC - Packet Scheduler
Miniport5.1.2535.0
WAN Miniport (IP) 5.1.2535.0
WAN Miniport (IP) - Packet Scheduler Miniport 5.1.2535.0
WAN Miniport (IPX) 5.1.2535.0
WAN Miniport (L2TP) 5.1.2535.0
WAN Miniport (PPPOE) 5.1.2535.0
WAN Miniport (PPTP) 5.1.2535.0

Here is the IP report.

Windows IP Configuration Host Name . . . . . . . . . . . . : RICK
Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . .
. : Broadcast IP Routing Enabled. . . . . . . . : No WINS
Proxy Enabled. . . . . . . . : NoEthernet adapter Local Area Connection 11:
Connection-specific DNS Suffix . : Description . . . . . . . . . .
. : D-Link DFE-530TX+ PCI Adapter Physical Address. . . . . . . . . :
00-50-BA-AE-46-F1 Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . .
. . : 0.0.0.0 Subnet Mask . . . . . . . . . . . : 0.0.0.0
Default Gateway . . . . . . . . . : DHCP Server . . . . . . . . . .
. : 0.0.0.0


Rick / Deb,

Please help us to help you.
1) Provide additional information in the same thread as you start with - don't
start additional threads. When we have to look back and forth in different
threads for different diagnostic data, it causes fatigue, which causes mistakes,
and hampers the diagnostic process.

2) When someone replies with an answer to your post, answer to that reply.
This is the standard for dialogue in the various forums on the internet:
Your Post #1
My answer #1
Your post #2
My answer #2
etc

When its:
Your post #1
My answer #1
Your post #2
My answer #2
Your post #3
My answer #3
It's hard to follow the thread. Please don't post this way.

How to Compose a Good Newsgroup Post
http://dts-l.org/goodpost.htm

How to Act Smart on Usenet
http://www.catb.org/~esr/faqs/smart-questions.html

Getting Your Post Noticed - and Answered
http://www.microsoft.com/presspass/f.../Mar27pmvp.asp

Now let's see what your problem may be. I see the many adapters, in the Everest
report. Please look under Settings - Network Connections - Local Area
Connection - Properties, under "This connection uses the following items:", and
list what's displayed there. It's possible that unwanted protocols may be
loaded, to start. You cannot uninstall hardware devices that have protocols
bound to them.

It also might help to know exactly what problems you're having with your
network, just in case the problem is not solely caused by excess network
adapters. Try and describe what network functions work and don't work, from
each computer. And how are all the computers connected?

--
Cheers,
Chuck
Paranoia comes from experience - and is not necessarily a bad thing.
  #3  
Old December 5th 04, 05:57 PM
Rick and Deb
external usenet poster
 
Posts: n/a
Default network adapters

I have taken the network card out and it still shows all the adapters in
devise manager. In network connections it doesn't show anything. I still
can't uninstall. It may be a bad adapter card but I still need these out
before I put another card in don't I? Thanks Chuck and sorry about post.
Yesterday was crazy, network down so I couldn't get reports from client
computer to host to send to you. Then A drive went out
"Chuck" wrote in message
...
On Sun, 5 Dec 2004 07:40:54 -0600, "Rick and Deb"

wrote:

I have windows xp home sp1. When I go to safe mode, go to device manger,
go
to network adapters it shows about 10 adapters in it. When I try to
uninstall it says " Failed to uninstall the device. The device may be
required to boot up computer.". I know at least 3 of them are network
cards
that is not in the computer. My network stopped working is why I even
looked
there. Any suggestions would be very helpful. Here is a list of adapters
that it shows that can not be uninstalled.

Network adapters:
Direct Parallel 5.1.2535.0
D-Link DFE-530TX+ PCI Adapter 5.397.823.2001
D-Link DFE-530TX+ PCI Adapter - Packet Scheduler Miniport5.1.2535.0
D-Link DFE-530TX+ PCI Adapter #2 - Packet Scheduler
Miniport5.1.2535.0
Realtek RTL8139 Family PCI Fast Ethernet NIC - Packet Scheduler
Miniport5.1.2535.0
WAN Miniport (IP) 5.1.2535.0
WAN Miniport (IP) - Packet Scheduler Miniport 5.1.2535.0
WAN Miniport (IPX) 5.1.2535.0
WAN Miniport (L2TP) 5.1.2535.0
WAN Miniport (PPPOE) 5.1.2535.0
WAN Miniport (PPTP) 5.1.2535.0

Here is the IP report.

Windows IP Configuration Host Name . . . . . . . . . . . . : RICK
Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . .
.
. : Broadcast IP Routing Enabled. . . . . . . . : No WINS
Proxy Enabled. . . . . . . . : NoEthernet adapter Local Area Connection
11:
Connection-specific DNS Suffix . : Description . . . . . . . . .
.
. : D-Link DFE-530TX+ PCI Adapter Physical Address. . . . . . . . .
:
00-50-BA-AE-46-F1 Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . .
.
. . : 0.0.0.0 Subnet Mask . . . . . . . . . . . : 0.0.0.0
Default Gateway . . . . . . . . . : DHCP Server . . . . . . . . .
.
. : 0.0.0.0


Rick / Deb,

Please help us to help you.
1) Provide additional information in the same thread as you start with -
don't
start additional threads. When we have to look back and forth in
different
threads for different diagnostic data, it causes fatigue, which causes
mistakes,
and hampers the diagnostic process.

2) When someone replies with an answer to your post, answer to that
reply.
This is the standard for dialogue in the various forums on the internet:
Your Post #1
My answer #1
Your post #2
My answer #2
etc

When its:
Your post #1
My answer #1
Your post #2
My answer #2
Your post #3
My answer #3
It's hard to follow the thread. Please don't post this way.

How to Compose a Good Newsgroup Post
http://dts-l.org/goodpost.htm

How to Act Smart on Usenet
http://www.catb.org/~esr/faqs/smart-questions.html

Getting Your Post Noticed - and Answered
http://www.microsoft.com/presspass/f.../Mar27pmvp.asp

Now let's see what your problem may be. I see the many adapters, in the
Everest
report. Please look under Settings - Network Connections - Local Area
Connection - Properties, under "This connection uses the following
items:", and
list what's displayed there. It's possible that unwanted protocols may be
loaded, to start. You cannot uninstall hardware devices that have
protocols
bound to them.

It also might help to know exactly what problems you're having with your
network, just in case the problem is not solely caused by excess network
adapters. Try and describe what network functions work and don't work,
from
each computer. And how are all the computers connected?

--
Cheers,
Chuck
Paranoia comes from experience - and is not necessarily a bad thing.



  #4  
Old December 5th 04, 07:09 PM
Chuck
external usenet poster
 
Posts: n/a
Default network adapters

On Sun, 5 Dec 2004 10:57:31 -0600, "Rick and Deb" *email_address_deleted*
wrote:

I have taken the network card out and it still shows all the adapters in
devise manager. In network connections it doesn't show anything. I still
can't uninstall. It may be a bad adapter card but I still need these out
before I put another card in don't I? Thanks Chuck and sorry about post.
Yesterday was crazy, network down so I couldn't get reports from client
computer to host to send to you. Then A drive went out


Rick / Deb,

If the list "This connection uses the following items:" shows nothing, then
that's part of the problem. The computer won't be on the network at all. My
list shows:
Client for Microsoft Networks
File and Printer Sharing For Microsoft Networks
QoS Packet Scheduler (optional)
Internet Protocol (TCP/IP)

Your list of 10 network cards shows, among other things, "Network adapters / WAN
Miniport (IPX)". IPX is a redundant network protocol. If you get your TCP/IP
working properly, you don't need IPX/SPX or NetBIOS.

Try again please. What is in your list? On Sparky? On Rick?

When you physically remove a network card (or other device) from the computer,
before removing the drivers for that card, and the bindings to the drivers, you
are causing a problem. You have to remove things in this order:
1) Interfaces between application software and the drivers ("bindings").
2) The drivers.
3) The hardware device.

Do it in reverse order, and the system gets confused. Put the card back in, the
system tries to load a driver for the new card, how does the system know its the
same card as before? And you get "...Adapter #2", "...Adapter #3", etc.

So start right now, and tell me exactly what works and doesn't.
1) Can you access the internet from the host (Sparky?)?
2) Can you access the internet from the client (Rick?)?
3) Can you share files between Rick and Sparky?

And while you're answering these questions (which admittedly are redundant)
PLEASE don't go pulling network cards out of either computer, or installing or
un installing drivers. If we're going to solve your problems, I have to know
how your computer is setup, and what is working, without you changing things
during the process.

And provide updated ipconfig information for each computer.
Start - Run - "cmd". Type "ipconfig /all c:\ipconfig.txt" into the command
window - Open c:\ipconfig.txt in Notepad, copy and paste entire contents into
your next post.

BTW, THIS is what an IPConfig should look like:
Windows IP Configuration

Host Name . . . . . . . . . . . . : MyComp
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : myhome.net

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : 3Com EtherLink XL 10/100 PCI For
Complete PC Management NIC (3C905C-TX)
Physical Address. . . . . . . . . : 00-04-76-D7-E2-BA
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.001.50
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.001.1
DHCP Server . . . . . . . . . . . : 192.168.001.1
DNS Servers . . . . . . . . . . . : 10.201.99.11
10.201.99.33
Lease Obtained. . . . . . . . . . : Wednesday, April 16, 2003 11:53:45
Lease Expires . . . . . . . . . . : Wednesday, April 23, 2003 11:53:45

NOT this:
Windows IP Configuration Host Name . . . . . . . . . . . . : RICK
Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . .
.. : Broadcast IP Routing Enabled. . . . . . . . : No WINS
Proxy Enabled. . . . . . . . : NoEthernet adapter Local Area Connection 11:
Connection-specific DNS Suffix . : Description . . . . . . . . . .
.. : D-Link DFE-530TX+ PCI Adapter Physical Address. . . . . . . . . :
00-50-BA-AE-46-F1 Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . .
.. . : 0.0.0.0 Subnet Mask . . . . . . . . . . . : 0.0.0.0
Default Gateway . . . . . . . . . : DHCP Server . . . . . . . . . .
.. : 0.0.0.0

Do you see the difference? How much easier it is to find information in the
first example? Any idea why yours came out as the second? Help us to help you.

--
Cheers,
Chuck
Paranoia comes from experience - and is not necessarily a bad thing.
  #5  
Old December 5th 04, 11:11 PM
Rick and Deb
external usenet poster
 
Posts: n/a
Default network adapters

Windows IP Configuration



Host Name . . . . . . . . . . . . : sparky

Primary Dns Suffix . . . . . . . :

Node Type . . . . . . . . . . . . : Unknown

IP Routing Enabled. . . . . . . . : No

WINS Proxy Enabled. . . . . . . . : No



Ethernet adapter Local Area Connection:



Connection-specific DNS Suffix . :

Description . . . . . . . . . . . : D-Link DFE-530TX+ PCI Adapter

Physical Address. . . . . . . . . : 00-50-BA-AE-3E-74

Dhcp Enabled. . . . . . . . . . . : Yes

Autoconfiguration Enabled . . . . : Yes

Autoconfiguration IP Address. . . : 169.254.116.119

Subnet Mask . . . . . . . . . . . : 255.255.0.0

Default Gateway . . . . . . . . . :



Ethernet adapter Local Area Connection 2:



Connection-specific DNS Suffix . : myhome.westell.com

Description . . . . . . . . . . . : Westell WireSpeed Dual Connect
Modem

Physical Address. . . . . . . . . : 00-0F-DB-10-F6-00

Dhcp Enabled. . . . . . . . . . . : Yes

Autoconfiguration Enabled . . . . : Yes

IP Address. . . . . . . . . . . . : 192.168.1.47

Subnet Mask . . . . . . . . . . . : 255.255.255.0

Default Gateway . . . . . . . . . : 192.168.1.1

DHCP Server . . . . . . . . . . . : 192.168.1.1

DNS Servers . . . . . . . . . . . : 192.168.1.1

192.168.1.1

Lease Obtained. . . . . . . . . . : Sunday, December 05, 2004
3:53:46 PM

Lease Expires . . . . . . . . . . : Monday, December 06, 2004
3:53:46 PM

Windows IP Configuration

This other one.

Host Name . . . . . . . . . . . . : RICK

Primary Dns Suffix . . . . . . . :

Node Type . . . . . . . . . . . . : Broadcast

IP Routing Enabled. . . . . . . . : No

WINS Proxy Enabled. . . . . . . . : No



Ethernet adapter Local Area Connection 14:



Connection-specific DNS Suffix . :

Description . . . . . . . . . . . : D-Link DFE-530TX+ PCI Adapter #2

Physical Address. . . . . . . . . : 00-50-BA-AE-46-F1

Dhcp Enabled. . . . . . . . . . . : Yes

Autoconfiguration Enabled . . . . : Yes

IP Address. . . . . . . . . . . . : 0.0.0.0

Subnet Mask . . . . . . . . . . . : 0.0.0.0

Default Gateway . . . . . . . . . :

DHCP Server . . . . . . . . . . . : 0.0.0.0

No they don't share files. No Rick doen't connect to internet. Yes sparky
does using usb port. When I had other protocol in they did share files. I
took everthing out butt what you said to leave, not thoching anything unless
you say to.

"Chuck" wrote in message
...
On Sun, 5 Dec 2004 10:57:31 -0600, "Rick and Deb"

*email_address_deleted*
wrote:

I have taken the network card out and it still shows all the adapters in
devise manager. In network connections it doesn't show anything. I still
can't uninstall. It may be a bad adapter card but I still need these out
before I put another card in don't I? Thanks Chuck and sorry about post.
Yesterday was crazy, network down so I couldn't get reports from client
computer to host to send to you. Then A drive went out


Rick / Deb,

If the list "This connection uses the following items:" shows nothing,

then
that's part of the problem. The computer won't be on the network at all.

My
list shows:
Client for Microsoft Networks
File and Printer Sharing For Microsoft Networks
QoS Packet Scheduler (optional)
Internet Protocol (TCP/IP)

Your list of 10 network cards shows, among other things, "Network adapters

/ WAN
Miniport (IPX)". IPX is a redundant network protocol. If you get your

TCP/IP
working properly, you don't need IPX/SPX or NetBIOS.

Try again please. What is in your list? On Sparky? On Rick?

When you physically remove a network card (or other device) from the

computer,
before removing the drivers for that card, and the bindings to the

drivers, you
are causing a problem. You have to remove things in this order:
1) Interfaces between application software and the drivers ("bindings").
2) The drivers.
3) The hardware device.

Do it in reverse order, and the system gets confused. Put the card back

in, the
system tries to load a driver for the new card, how does the system know

its the
same card as before? And you get "...Adapter #2", "...Adapter #3", etc.

So start right now, and tell me exactly what works and doesn't.
1) Can you access the internet from the host (Sparky?)?
2) Can you access the internet from the client (Rick?)?
3) Can you share files between Rick and Sparky?

And while you're answering these questions (which admittedly are

redundant)
PLEASE don't go pulling network cards out of either computer, or

installing or
un installing drivers. If we're going to solve your problems, I have to

know
how your computer is setup, and what is working, without you changing

things
during the process.

And provide updated ipconfig information for each computer.
Start - Run - "cmd". Type "ipconfig /all c:\ipconfig.txt" into the

command
window - Open c:\ipconfig.txt in Notepad, copy and paste entire contents

into
your next post.

BTW, THIS is what an IPConfig should look like:
Windows IP Configuration

Host Name . . . . . . . . . . . . : MyComp
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : myhome.net

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : 3Com EtherLink XL 10/100 PCI

For
Complete PC Management NIC (3C905C-TX)
Physical Address. . . . . . . . . : 00-04-76-D7-E2-BA
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.001.50
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.001.1
DHCP Server . . . . . . . . . . . : 192.168.001.1
DNS Servers . . . . . . . . . . . : 10.201.99.11
10.201.99.33
Lease Obtained. . . . . . . . . . : Wednesday, April 16, 2003

11:53:45
Lease Expires . . . . . . . . . . : Wednesday, April 23, 2003

11:53:45

NOT this:
Windows IP Configuration Host Name . . . . . . . . . . . . : RICK
Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . .

..
. : Broadcast IP Routing Enabled. . . . . . . . : No WINS
Proxy Enabled. . . . . . . . : NoEthernet adapter Local Area Connection

11:
Connection-specific DNS Suffix . : Description . . . . . . . . .

..
. : D-Link DFE-530TX+ PCI Adapter Physical Address. . . . . . . . .

:
00-50-BA-AE-46-F1 Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . .

..
. . : 0.0.0.0 Subnet Mask . . . . . . . . . . . : 0.0.0.0
Default Gateway . . . . . . . . . : DHCP Server . . . . . . . . .

..
. : 0.0.0.0

Do you see the difference? How much easier it is to find information in

the
first example? Any idea why yours came out as the second? Help us to

help you.

--
Cheers,
Chuck
Paranoia comes from experience - and is not necessarily a bad thing.



  #6  
Old December 6th 04, 03:18 AM
Chuck
external usenet poster
 
Posts: n/a
Default network adapters

On Sun, 5 Dec 2004 16:11:54 -0600, "Rick and Deb" *email_address_deleted*
wrote:

SNIP

No they don't share files. No Rick doen't connect to internet. Yes sparky
does using usb port. When I had other protocol in they did share files. I
took everthing out butt what you said to leave, not thoching anything unless
you say to.


OK, the light is beginning to come on.

So when you had IPX (on both computers?) you had file sharing. Which means that
the network cards must work, and must be properly connected. That's 50% of the
battle right there.

So you have to connect Rick thru Sparky cause you're using a USB modem on
Sparky. Yuck. But it should work with ICS.

Are you running ICS on Sparky ("This computer connects directly to the internet"
and "This computer provides internet service to other computers")? If you were,
the D-Link should have an ip address 192.168.0.1. With ICS on Sparky, and with
both network cards working and properly connected, Rick should get a suitable ip
address assigned.

So get ICS working on Sparky (run the wizard giving the settings above), and
rerun IPConfig on both.

Do you have firewalls on either computer? Now or in the past?

--
Cheers,
Chuck
Paranoia comes from experience - and is not necessarily a bad thing.
  #7  
Old December 17th 04, 07:28 PM
No_Name
external usenet poster
 
Posts: n/a
Default network adapters

This may not look like the solution, but trust me, it is.
http://support.microsoft.com/?kbid=269155

Jim McNeece

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
XP will not let me remove these devices in Network Adapters Section Butch Hoornstra Networking and the Internet with Windows XP 5 September 28th 04 02:04 AM
Sharing & "Entire Network" ?? Jim Networking and the Internet with Windows XP 11 September 25th 04 10:24 PM
Setting up Home Networking on Win XP turns on ICF - and stops the network working... John Hyde Networking and the Internet with Windows XP 1 August 24th 04 07:32 PM
Network Cable Unplugged Error Alan Networking and the Internet with Windows XP 2 August 23rd 04 07:36 PM
Firewire 1394 speed/connection problem Kevin Brault Networking and the Internet with Windows XP 4 August 22nd 04 10:31 PM






All times are GMT +1. The time now is 09:09 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 PCbanter.
The comments are property of their posters.