If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
4 basic partitions; how do I get rid of the unnamed partition?
I've got a 500Gb USB drive that I'd like to carve up into 4 basic
partitions, 3 NTFS and 1 FAT32 so I can use it on my iMac. I'm using the Computer Management software to create and format the partitions. Unfortunately, there's this unnamed 200MB partition that I can't seem to get rid of. So, right now, the drive looks like this: 200MB Unnamed (format type unspecified) 73Gb E: NTFS 53Gb F: NTFS 60Gb G: NTFS 278Gb Unallocated How do I get rid of the first partition so that I can allocate the rest of the drive to FAT32? TIA, David |
Ads |
#2
|
|||
|
|||
4 basic partitions; how do I get rid of the unnamed partition?
Did you have Windows 7 beta installed?
-- JS http://www.pagestart.com "David Schwartz" wrote in message ... I've got a 500Gb USB drive that I'd like to carve up into 4 basic partitions, 3 NTFS and 1 FAT32 so I can use it on my iMac. I'm using the Computer Management software to create and format the partitions. Unfortunately, there's this unnamed 200MB partition that I can't seem to get rid of. So, right now, the drive looks like this: 200MB Unnamed (format type unspecified) 73Gb E: NTFS 53Gb F: NTFS 60Gb G: NTFS 278Gb Unallocated How do I get rid of the first partition so that I can allocate the rest of the drive to FAT32? TIA, David |
#3
|
|||
|
|||
4 basic partitions; how do I get rid of the unnamed partition?
On Apr 27, 5:32*am, "JS" @ wrote:
Did you have Windows 7 beta installed? No. David |
#4
|
|||
|
|||
4 basic partitions; how do I get rid of the unnamed partition?
David Schwartz wrote:
I've got a 500Gb USB drive that I'd like to carve up into 4 basic partitions, 3 NTFS and 1 FAT32 so I can use it on my iMac. I'm using the Computer Management software to create and format the partitions. Unfortunately, there's this unnamed 200MB partition that I can't seem to get rid of. So, right now, the drive looks like this: 200MB Unnamed (format type unspecified) 73Gb E: NTFS 53Gb F: NTFS 60Gb G: NTFS 278Gb Unallocated How do I get rid of the first partition so that I can allocate the rest of the drive to FAT32? TIA, David You can have four primary partitions, as shown here. http://www.lissot.net/partition/partition-03.html If a logical partition is used, it is possible to have more partitions. The logical is a container for more of them. You can use a tool like this, to examine the numbers in the partition table. Double clicking the "type" field, brings up a table of values. There are lots of little utilities like this, in various OSes, for examination. ftp://ftp.symantec.com/public/englis.../pq/utilities/ PTEDIT32.zip -- PTEDIT32.EXE This is an example for one of my disks. --- Start ---- ---- End ---- Type Boot Cyl Head Sector Cyl Head Sector Sectors_before Sectors 0C 80 0 1 1 1023 254 63 63 40965687 0C 00 1023 0 1 1023 254 63 40965750 40965750 83 00 1023 1 1 1023 254 63 118800738 37495647 82 00 1023 1 1 1023 254 63 81931563 36869112 The partitions don't have to be inserted in the table, is spatial order. In that example, partition #3 is the fourth entry in the table, while partition #4 is the third entry. The Sectors_before is what gives me that info. Those four are primary, for whatever that is worth. The first partition is marked active, and is the bootable OS on that drive. Partition #3 is an OS partition, but an external bootstrap is used to access it. Partition #4 is swap space. The second small partition is a data partition. In principle, you could edit your partition table using that tool, hook up the space at the end of the disk, and disconnect reference to the 200MB portion. You'd want to carefully write down the current values, and keep a copy of the tool. If a day arrives, where you need the 200MB thing, you could hook it back up. But you'd have to be insane to work on a disk that way, with valuable data on it. Once the OS gets at it, and attempts to write to some partition or repair something, then you'd really be screwed. (I use PTEDIT32 purely for a quick check of what is in there.) There is a free partition manager here, but no partition editor is completely without issues. You want a backup of the disk, before doing any brain surgery. Even Partition Magic has been known to make luncheon meat out of a disk, so it pays to have a backup handy. http://www.partition-tool.com/personal.htm Partition managers can move partitions around, copy the files in a partition and so on. In some cases, they have to reboot into a DOS-like environment, when dealing with the boot partition (as the boot partition would normally be "busy"). If you wanted to reclaim that 200MB of space (i.e. erase and potentially overwrite it with something), a partition manager can do that for you. My suggestion of screwing with the partition table entries, would be to make the 200MB "invisible". If you made it invisible, and then used a tool like TestDisk or some commercial data recovery tool, it might notice the invisible space, and try and make a partition table entry for it. So being creative, can have its side effects. When you're in Disk Management, does it give you the option to delete that 200MB partition, even if the file system type is unknown ? Maybe you could do that, and then try to change the 278GB chunk at the end of the disk, into a partition. Before you "format" anything, you could use PTEDIT32 and have a look at the numbers, to see how the partition has been set up. Take care, Paul |
#5
|
|||
|
|||
4 basic partitions; how do I get rid of the unnamed partition?
"David Schwartz" wrote in message ... I've got a 500Gb USB drive that I'd like to carve up into 4 basic partitions, 3 NTFS and 1 FAT32 so I can use it on my iMac. I'm using the Computer Management software to create and format the partitions. Unfortunately, there's this unnamed 200MB partition that I can't seem to get rid of. So, right now, the drive looks like this: 200MB Unnamed (format type unspecified) 73Gb E: NTFS 53Gb F: NTFS 60Gb G: NTFS 278Gb Unallocated How do I get rid of the first partition so that I can allocate the rest of the drive to FAT32? TIA, David David: I realize that you want to use that 278 GB "unallocated" disk space as a FAT32 partition (at least I take it that's your objective), however, setting aside the existence of that 200 MB entry... Just as a test - using Disk Management, what precisely happens when you attempt to set up a NTFS partition on that unallocated disk space? You're unable to do so? (I assume you're aware that you cannot create a FAT32 partition 32 GB via the Disk Management snap-in, however, there are ways to get around that limitation.) Anna |
#6
|
|||
|
|||
4 basic partitions; how do I get rid of the unnamed partition?
Actually, I was able to work it all out by sources I found on the web.
Now I'm on the hunt for software that will allow me to create images of different machines on each partition so that, if needed, I could restore the entire root directory. Anyone got any leads? Freeware would be nice but not required. Thanks for all your help! David |
#7
|
|||
|
|||
4 basic partitions; how do I get rid of the unnamed partition?
Norton Ghost version 14 - has a 30 day trial available
(Trial does not allow you to create a Bootable Restore but it does support network backup) http://www.symantec.com/norton/produ...r&pvid=ghost14 User's Guide: ftp://ftp.symantec.com/public/englis...user_guide.pdf Product Review "Symantec's 14th Ghost": http://www.softpedia.com/reviews/win...ew-78775.shtml True Image 2009 - has a 15 day trial version available, (Create a Restore/Rescue Media CD before you start) http://www.acronis.com/homecomputing...cts/trueimage/ User's Guide: http://us1.download.acronis.com/pdf/...ge12_ug.en.pdf -- JS http://www.pagestart.com "David Schwartz" wrote in message ... Actually, I was able to work it all out by sources I found on the web. Now I'm on the hunt for software that will allow me to create images of different machines on each partition so that, if needed, I could restore the entire root directory. Anyone got any leads? Freeware would be nice but not required. Thanks for all your help! David |
#8
|
|||
|
|||
4 basic partitions; how do I get rid of the unnamed partition?
On Wed, 29 Apr 2009 07:32:08 -0700 (PDT), David Schwartz
wrote: Actually, I was able to work it all out by sources I found on the web. Now I'm on the hunt for software that will allow me to create images of different machines on each partition so that, if needed, I could restore the entire root directory. Anyone got any leads? Freeware would be nice but not required. DriveImage XML Thanks for all your help! David |
Thread Tools | |
Display Modes | |
|
|