A Windows XP help forum. PCbanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » PCbanter forum » Microsoft Windows XP » Hardware and Windows XP
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

dual monitor problem



 
 
Thread Tools Display Modes
  #1  
Old October 1st 10, 02:12 PM posted to microsoft.public.windowsxp.hardware
SamGordon
external usenet poster
 
Posts: 1
Default dual monitor problem

I'm running a laptop with XP installed, and have an NEC projector, but
have a problem with the projector output when using it as a secondary
display.

I've ensured I've got the basics right, like ensuring that power is
going to the projector and that all cables are connected - I know
there is data going to the projector because the desktop is being
displayed, but data from a program will not be - ie, we just want to
see information displayed from one specific prgoram and not view the
entire desktop via the projector (we can do that without any trouble).
The projector will miror the information from the laptop screen
without any problem, but will not display the wanted information using
Function+F4.

When selecting Montior 1 in Display Properties (using identify and
attach to set the laptop monitor as primary dispay), and then
selecting Monitor 2 (using identify and attach to set the projector as
secondary display), the laptop displays 1 every time, but the
projector always fails to to display 2.

When choosing properties from the drop down menu, there is only one
monitor enabled, the other three are all grayed out, and this is
obviously an integrated part of the problem, because two have to be
enabled to use both the laptop monitor and the projector (to the best
of my understanding). I am unable to enable a second display in this
window and am unsure why.

The desktop is spread over both the laptop and projector, but when
attempting to view the output on the projector via a proram, I'm
unable to view the output from a specific program. When using enable
extended desktop, the checkbox fails to take effect, and remains
unchecked after attempting to check and apply the setting.

Is it possible that the computer may have a bug or virus, because of
the enable extended desktop problem and the '2' failing to appear for
the projector in the "blue box"..? Would it be worthwile updating BIOS
and video drivers for the video card and projector?

Any help, information or links would be greatly appreciated. Does
anyone have any idea how to solve this problem?

Many thanks

Sam

PS Have applied Windows Updates to no avail.
Ads
  #2  
Old October 1st 10, 04:11 PM posted to microsoft.public.windowsxp.hardware
pjp[_4_]
external usenet poster
 
Posts: 89
Default dual monitor problem

Are you sure the laptop is capable of doing the "Extended Desktop". From
what you suggest you can get output but it's unclear if it's simply a
duplicate of your laptop's lcd screen or if it's part of a larger desktop,
e.g. can you take an open window (My Computer) and have it partially on one
display with the rest on the second or ??? Many laptops seem to really only
offer "clone" mode, e.g. display what's on primary display also.

If you have extended desktop working, e.g. as an example laptop screen is
set to 1024x780 and the tv out is also set to 1024x780 do you get a 2048x780
desktop (assuming horizontal placement of displays) and the ability to drag
windows onto either display? If so, then any app (except hardware overlay,
e.g. video, which sometimes may not work at all on 2nd display) should be
viewable?


"SamGordon" wrote in message
...
I'm running a laptop with XP installed, and have an NEC projector, but
have a problem with the projector output when using it as a secondary
display.

I've ensured I've got the basics right, like ensuring that power is
going to the projector and that all cables are connected - I know
there is data going to the projector because the desktop is being
displayed, but data from a program will not be - ie, we just want to
see information displayed from one specific prgoram and not view the
entire desktop via the projector (we can do that without any trouble).
The projector will miror the information from the laptop screen
without any problem, but will not display the wanted information using
Function+F4.

When selecting Montior 1 in Display Properties (using identify and
attach to set the laptop monitor as primary dispay), and then
selecting Monitor 2 (using identify and attach to set the projector as
secondary display), the laptop displays 1 every time, but the
projector always fails to to display 2.

When choosing properties from the drop down menu, there is only one
monitor enabled, the other three are all grayed out, and this is
obviously an integrated part of the problem, because two have to be
enabled to use both the laptop monitor and the projector (to the best
of my understanding). I am unable to enable a second display in this
window and am unsure why.

The desktop is spread over both the laptop and projector, but when
attempting to view the output on the projector via a proram, I'm
unable to view the output from a specific program. When using enable
extended desktop, the checkbox fails to take effect, and remains
unchecked after attempting to check and apply the setting.

Is it possible that the computer may have a bug or virus, because of
the enable extended desktop problem and the '2' failing to appear for
the projector in the "blue box"..? Would it be worthwile updating BIOS
and video drivers for the video card and projector?

Any help, information or links would be greatly appreciated. Does
anyone have any idea how to solve this problem?

Many thanks

Sam

PS Have applied Windows Updates to no avail.



  #3  
Old October 2nd 10, 03:36 AM posted to microsoft.public.windowsxp.hardware
LVTravel
external usenet poster
 
Posts: 669
Default dual monitor problem



"SamGordon" wrote in message
...
I'm running a laptop with XP installed, and have an NEC projector, but
have a problem with the projector output when using it as a secondary
display.

I've ensured I've got the basics right, like ensuring that power is
going to the projector and that all cables are connected - I know
there is data going to the projector because the desktop is being
displayed, but data from a program will not be - ie, we just want to
see information displayed from one specific prgoram and not view the
entire desktop via the projector (we can do that without any trouble).
The projector will miror the information from the laptop screen
without any problem, but will not display the wanted information using
Function+F4.

When selecting Montior 1 in Display Properties (using identify and
attach to set the laptop monitor as primary dispay), and then
selecting Monitor 2 (using identify and attach to set the projector as
secondary display), the laptop displays 1 every time, but the
projector always fails to to display 2.

When choosing properties from the drop down menu, there is only one
monitor enabled, the other three are all grayed out, and this is
obviously an integrated part of the problem, because two have to be
enabled to use both the laptop monitor and the projector (to the best
of my understanding). I am unable to enable a second display in this
window and am unsure why.

The desktop is spread over both the laptop and projector, but when
attempting to view the output on the projector via a proram, I'm
unable to view the output from a specific program. When using enable
extended desktop, the checkbox fails to take effect, and remains
unchecked after attempting to check and apply the setting.

Is it possible that the computer may have a bug or virus, because of
the enable extended desktop problem and the '2' failing to appear for
the projector in the "blue box"..? Would it be worthwile updating BIOS
and video drivers for the video card and projector?

Any help, information or links would be greatly appreciated. Does
anyone have any idea how to solve this problem?

Many thanks

Sam

PS Have applied Windows Updates to no avail.


What program are you trying to display on the projector only?

F + F4 only rotates through the three display settings, Laptop only, Laptop
and 2nd display, 2nd display only and these last two are clones of the
primary laptop display only.

Once you get the "mirrored" display showing on the projector, Right click
the desktop, Click Properties, Settings. Click on monitor 2 display in the
settings window. At this time you should see Extend my .... ungrayed. If
this ungrays then you place a checkmark in the box and OK out. You should
then be able to move your specific program output to the projector.

If these exact steps do not allow you to move the output to the projector
let us know.

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off






All times are GMT +1. The time now is 09:38 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 PCbanter.
The comments are property of their posters.