If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Cables not detected
Hi i have a network of five pcs which students distructed and i have changed
the hub and all the ethernet cables, now some of the pcs are working but the other two wont connect because the cables are not detected. i notice so by looking at the lights of the corresponding port. what do i need to do to get the ethernet detected so the pcs will have internet thanks. thats is all xp computers |
Ads |
#2
|
|||
|
|||
Cables not detected
Hi
You have to physically check all the cables to see if they are connected as they should. You might need to check computer by computer, plug and unplug, and put stickers on the cables so you know what belongs to what, and what is working and what is Not working. When you done lock the switch/hub in a ventilated cabinet. If the cables looks OK and you want to check the Computer's network configuration. http://www.ezlan.net/debug.html Jack (MS, MVP-Networking). "Amin" wrote in message ... Hi i have a network of five pcs which students distructed and i have changed the hub and all the ethernet cables, now some of the pcs are working but the other two wont connect because the cables are not detected. i notice so by looking at the lights of the corresponding port. what do i need to do to get the ethernet detected so the pcs will have internet thanks. thats is all xp computers |
#3
|
|||
|
|||
Cables not detected
Hi
You have to physically check all the cables to see if they are connected as they should. You might need to check computer by computer, plug and unplug, and put stickers on the cables so you know what belongs to what, and what is working and what is Not working. When you done lock the switch/hub in a ventilated cabinet. If the cables looks OK and you want to check the Computer's network configuration. http://www.ezlan.net/debug.html Jack (MS, MVP-Networking). "Amin" wrote in message ... Hi i have a network of five pcs which students distructed and i have changed the hub and all the ethernet cables, now some of the pcs are working but the other two wont connect because the cables are not detected. i notice so by looking at the lights of the corresponding port. what do i need to do to get the ethernet detected so the pcs will have internet thanks. thats is all xp computers |
#4
|
|||
|
|||
Cables not detected
If you tampered with Network Interface Cards in the box itself then perhaps are not fitted properly. Worth checking them again. hth Amin wrote: Hi i have a network of five pcs which students distructed and i have changed the hub and all the ethernet cables, now some of the pcs are working but the other two wont connect because the cables are not detected. i notice so by looking at the lights of the corresponding port. what do i need to do to get the ethernet detected so the pcs will have internet thanks. thats is all xp computers |
#5
|
|||
|
|||
Cables not detected
If you tampered with Network Interface Cards in the box itself then perhaps are not fitted properly. Worth checking them again. hth Amin wrote: Hi i have a network of five pcs which students distructed and i have changed the hub and all the ethernet cables, now some of the pcs are working but the other two wont connect because the cables are not detected. i notice so by looking at the lights of the corresponding port. what do i need to do to get the ethernet detected so the pcs will have internet thanks. thats is all xp computers |
Thread Tools | |
Display Modes | |
|
|