If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
LAN Connections in XP
I recently bought a new Brother printer and connected it to my XP
machine. But when my wife wanted to print something, she could no longer see my computer on the network. It was fine with our previous Samsung printer, which died. Her computer is runnin Windows 8.1. Now I find that I can't see any other computers on our LAN. When I try to fix it, I get a message saying that I do not have permission to connect to the other and I must ask the Administrator, I AM the administrator, so what to I do? Four computers on the network can see each other fine, but my XP machine that has the printer attached, is inviduible to the others, and them to it. Why would it stop working? -- Steve Hayes http://www.khanya.org.za/stevesig.htm http://khanya.wordpress.com |
Ads |
#2
|
|||
|
|||
LAN Connections in XP
Steve,
she could no longer see my computer on the network. .... Now I find that I can't see any other computers on our LAN. .... Why would it stop working? The first thing that comes to mind (assuming you can still get onto the internet) is that the "workgroup" has been changed somehow. Right-click "My computer" - "properties" - "Computer name" There should be an "workgroup" entry there, followed by a name in all capitals. Compare with the one your wifes computer has. You can also do some basic connectivity checks like "ping"-ing the other computer (both ways), to make sure they can actually see each other (the LAN is working). For that you need to figure out the IPs of the computers. To do that open a console-window and type "ipconfig". You should see four lines with info, with only the last number of the "IP address" being different between the two computers. Take that IP address to the other computer, type "ping " and than the IP address. If all is well you will see four lines mentioning the time it took to get an answer. If you only get time-out messages it means that both computers cannot see each other at all (which should not happen in your case, but you never know ... Murphies law and all that). Hope that helps. Regards, Rudy Wieser -- Origional message: Steve Hayes schreef in berichtnieuws ... I recently bought a new Brother printer and connected it to my XP machine. But when my wife wanted to print something, she could no longer see my computer on the network. It was fine with our previous Samsung printer, which died. Her computer is runnin Windows 8.1. Now I find that I can't see any other computers on our LAN. When I try to fix it, I get a message saying that I do not have permission to connect to the other and I must ask the Administrator, I AM the administrator, so what to I do? Four computers on the network can see each other fine, but my XP machine that has the printer attached, is inviduible to the others, and them to it. Why would it stop working? -- Steve Hayes http://www.khanya.org.za/stevesig.htm http://khanya.wordpress.com |
#3
|
|||
|
|||
LAN Connections in XP
On Fri, 12 May 2017 10:57:36 +0200, "R.Wieser"
wrote: Steve, she could no longer see my computer on the network. ... Now I find that I can't see any other computers on our LAN. ... Why would it stop working? The first thing that comes to mind (assuming you can still get onto the internet) is that the "workgroup" has been changed somehow. Right-click "My computer" - "properties" - "Computer name" There should be an "workgroup" entry there, followed by a name in all capitals. Compare with the one your wifes computer has. You can also do some basic connectivity checks like "ping"-ing the other computer (both ways), to make sure they can actually see each other (the LAN is working). For that you need to figure out the IPs of the computers. To do that open a console-window and type "ipconfig". You should see four lines with info, with only the last number of the "IP address" being different between the two computers. Take that IP address to the other computer, type "ping " and than the IP address. If all is well you will see four lines mentioning the time it took to get an answer. If you only get time-out messages it means that both computers cannot see each other at all (which should not happen in your case, but you never know ... Murphies law and all that). Thanks very much. Tried that, and both timed out. But both connect to the router on the same LAN -- my XP computer using Ethernet, and my wife's using WiFi. -- Steve Hayes http://www.khanya.org.za/stevesig.htm http://khanya.wordpress.com |
#5
|
|||
|
|||
LAN Connections in XP
Steve Hayes wrote:
But both connect to the router on the same LAN -- my XP computer using Ethernet, and my wife's using WiFi. Some routers let you isolate different network segments (by using different network segments on each port/wifi to the router). That is, they assign a different network segment to each port/wifi connect, allow outbound connects from each port/wifi connect to the Internet, but do not allow traffic between the port/wifi connects. Are all your hosts on the same network segment? Are that all assigned something like xxx.xxx.xxx.NNN where the xxx.xxx.xxx portion is the same for all of them? Is the submask for each the same? As per Wiesers suggestion, you can use ipconfig /all to see the IP address hence network segment and submask assigned to the NIC(s) in each of your hosts. You also need to make sure that each of your hosts and your router are supporting the same type of IP addressing. There is IPv4 and IPv6. While I had hosts that supported both, I had an old router that only supported IPv4. When I got a newer router that supported IPv6, it was assigning both IPv4 and IPv6 addresses to my hosts. IPv6 is pre-enabled on Windows Vista+; however, IPv6 is not pre-enabled on Windows XP. See: https://www.ghacks.net/2011/02/06/ho...on-windows-xp/ With a router that supports both, your hosts should have both types of IP addresses assigned but you need to make sure they are within the same network segment and that your router is not isolating traffic between its ports/wifi connections. |
#6
|
|||
|
|||
LAN Connections in XP
On Fri, 12 May 2017 21:38:15 +0200, "R.Wieser"
wrote: Steve, Tried that, and both timed out. I take it both "ipconfig" outputs where mostly the same (apart from the rightmost number of the IP address) ? -- important! Also, can both (still) connect to the internet (if so that would be odd) ? Can you *physically* connect your wifes computer to the lan (using an ethernet cable) and check again (best to temporarily disable wifi on your wifes/both computers so you can be sure the ethernet connection is used) ? Could possibly, but my son's computer is physically connected to the network by Ethernet, and I can't see that either. There are five computers on the network, and four of them can see each other, but mine can't see any of the others. I'm wondering if installing a new printer changed a setting somewhere. -- Steve Hayes http://www.khanya.org.za/stevesig.htm http://khanya.wordpress.com |
#7
|
|||
|
|||
LAN Connections in XP
On Sat, 13 May 2017 01:54:29 +0200, Steve Hayes
wrote: On Fri, 12 May 2017 21:38:15 +0200, "R.Wieser" wrote: Steve, Tried that, and both timed out. I take it both "ipconfig" outputs where mostly the same (apart from the rightmost number of the IP address) ? -- important! Also, can both (still) connect to the internet (if so that would be odd) ? Can you *physically* connect your wifes computer to the lan (using an ethernet cable) and check again (best to temporarily disable wifi on your wifes/both computers so you can be sure the ethernet connection is used) ? Could possibly, but my son's computer is physically connected to the network by Ethernet, and I can't see that either. There are five computers on the network, and four of them can see each other, but mine can't see any of the others. I'm wondering if installing a new printer changed a setting somewhere. You're not answering some of the most useful questions, so it might be best to post your network config from several PCs - one or two that seem to work fine and the one that no longer works as expected. Here's what mine looks like, to show you exactly what I'd like to see. Your output will have more lines, but you can edit them out so that your output matches mine. C:\Windows\System32ipconfig /all Windows IP Configuration Ethernet adapter Local Area Connection 3: DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.11.10(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.11.1 DHCP Server . . . . . . . . . . . : 192.168.11.1 DNS Servers . . . . . . . . . . . : 8.8.8.8 NetBIOS over Tcpip. . . . . . . . : Enabled |
#8
|
|||
|
|||
LAN Connections in XP
On Sat, 13 May 2017 12:01:02 -0500, Char Jackson
wrote: On Sat, 13 May 2017 01:54:29 +0200, Steve Hayes wrote: On Fri, 12 May 2017 21:38:15 +0200, "R.Wieser" wrote: Steve, Tried that, and both timed out. I take it both "ipconfig" outputs where mostly the same (apart from the rightmost number of the IP address) ? -- important! Also, can both (still) connect to the internet (if so that would be odd) ? Can you *physically* connect your wifes computer to the lan (using an ethernet cable) and check again (best to temporarily disable wifi on your wifes/both computers so you can be sure the ethernet connection is used) ? Could possibly, but my son's computer is physically connected to the network by Ethernet, and I can't see that either. There are five computers on the network, and four of them can see each other, but mine can't see any of the others. I'm wondering if installing a new printer changed a setting somewhere. You're not answering some of the most useful questions, so it might be best to post your network config from several PCs - one or two that seem to work fine and the one that no longer works as expected. Here's what mine looks like, to show you exactly what I'd like to see. Your output will have more lines, but you can edit them out so that your output matches mine. C:\Windows\System32ipconfig /all Windows IP Configuration Ethernet adapter Local Area Connection 3: DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.11.10(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.11.1 DHCP Server . . . . . . . . . . . : 192.168.11.1 DNS Servers . . . . . . . . . . . : 8.8.8.8 NetBIOS over Tcpip. . . . . . . . : Enabled Well, here's mine: Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp. C:\Documents and Settings\Steveipconfig Windows IP Configuration Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 192.168.0.2 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.1 -- Steve Hayes http://www.khanya.org.za/stevesig.htm http://khanya.wordpress.com |
#9
|
|||
|
|||
LAN Connections in XP
On Sat, 13 May 2017 12:01:02 -0500, Char Jackson
wrote: On Sat, 13 May 2017 01:54:29 +0200, Steve Hayes wrote: On Fri, 12 May 2017 21:38:15 +0200, "R.Wieser" wrote: Steve, Tried that, and both timed out. I take it both "ipconfig" outputs where mostly the same (apart from the rightmost number of the IP address) ? -- important! Also, can both (still) connect to the internet (if so that would be odd) ? Can you *physically* connect your wifes computer to the lan (using an ethernet cable) and check again (best to temporarily disable wifi on your wifes/both computers so you can be sure the ethernet connection is used) ? Could possibly, but my son's computer is physically connected to the network by Ethernet, and I can't see that either. There are five computers on the network, and four of them can see each other, but mine can't see any of the others. I'm wondering if installing a new printer changed a setting somewhere. You're not answering some of the most useful questions, so it might be best to post your network config from several PCs - one or two that seem to work fine and the one that no longer works as expected. Here's what mine looks like, to show you exactly what I'd like to see. Your output will have more lines, but you can edit them out so that your output matches mine. C:\Windows\System32ipconfig /all Windows IP Configuration Ethernet adapter Local Area Connection 3: DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.11.10(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.11.1 DHCP Server . . . . . . . . . . . : 192.168.11.1 DNS Servers . . . . . . . . . . . : 8.8.8.8 NetBIOS over Tcpip. . . . . . . . : Enabled Oh wait, you said /all Windows IP Configuration Host Name . . . . . . . . . . . . : STEVEDSK Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe FE Family Controller Physical Address. . . . . . . . . : 90-FB-A6-6C-8F-2C Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.0.2 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.1 DHCP Server . . . . . . . . . . . : 192.168.0.1 DNS Servers . . . . . . . . . . . : 192.168.0.1 Lease Obtained. . . . . . . . . . : 13 May 2017 09:28:11 AM Lease Expires . . . . . . . . . . : 14 May 2017 09:28:11 AM -- Steve Hayes http://www.khanya.org.za/stevesig.htm http://khanya.wordpress.com |
#10
|
|||
|
|||
LAN Connections in XP
On Fri, 12 May 2017 10:14:24 +0200, Steve Hayes
wrote: I recently bought a new Brother printer and connected it to my XP machine. But when my wife wanted to print something, she could no longer see my computer on the network. It was fine with our previous Samsung printer, which died. Her computer is runnin Windows 8.1. Now I find that I can't see any other computers on our LAN. When I try to fix it, I get a message saying that I do not have permission to connect to the other and I must ask the Administrator, I AM the administrator, so what to I do? Ask yourself. Four computers on the network can see each other fine, but my XP machine that has the printer attached, is inviduible to the others, and them to it. Why would it stop working? Did you install the XP driver for your printer? |
#11
|
|||
|
|||
LAN Connections in XP
On Sun, 14 May 2017 09:37:32 +1000, Lucifer Morningstar
wrote: On Fri, 12 May 2017 10:14:24 +0200, Steve Hayes wrote: I recently bought a new Brother printer and connected it to my XP machine. But when my wife wanted to print something, she could no longer see my computer on the network. It was fine with our previous Samsung printer, which died. Her computer is runnin Windows 8.1. Now I find that I can't see any other computers on our LAN. When I try to fix it, I get a message saying that I do not have permission to connect to the other and I must ask the Administrator, I AM the administrator, so what to I do? Ask yourself. Four computers on the network can see each other fine, but my XP machine that has the printer attached, is inviduible to the others, and them to it. Why would it stop working? Did you install the XP driver for your printer? That would not prevent him from seeing the other computers on the network. I can't figure out why you get TWO completely different IPs from your two posted ipconfigs. Default Gateway . . . . . . . . . : 192.168.11.1 and Default Gateway . . . . . . . . . : 192.168.0.1 They are incompatible, unless you are using a mask that covers them all (which you are not). Check they are ALL either 192.168.0.x OR 192.168.11.x if the mask is 255.255.255.0 []'s -- Don't be evil - Google 2004 We have a new policy - Google 2012 |
#12
|
|||
|
|||
LAN Connections in XP
On Sat, 13 May 2017 20:31:27 +0200, Steve Hayes
wrote: On Sat, 13 May 2017 12:01:02 -0500, Char Jackson wrote: On Sat, 13 May 2017 01:54:29 +0200, Steve Hayes wrote: On Fri, 12 May 2017 21:38:15 +0200, "R.Wieser" wrote: Steve, Tried that, and both timed out. I take it both "ipconfig" outputs where mostly the same (apart from the rightmost number of the IP address) ? -- important! Also, can both (still) connect to the internet (if so that would be odd) ? Can you *physically* connect your wifes computer to the lan (using an ethernet cable) and check again (best to temporarily disable wifi on your wifes/both computers so you can be sure the ethernet connection is used) ? Could possibly, but my son's computer is physically connected to the network by Ethernet, and I can't see that either. There are five computers on the network, and four of them can see each other, but mine can't see any of the others. I'm wondering if installing a new printer changed a setting somewhere. You're not answering some of the most useful questions, so it might be best to post your network config from several PCs - one or two that seem to work fine and the one that no longer works as expected. Here's what mine looks like, to show you exactly what I'd like to see. Your output will have more lines, but you can edit them out so that your output matches mine. C:\Windows\System32ipconfig /all Windows IP Configuration Ethernet adapter Local Area Connection 3: DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.11.10(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.11.1 DHCP Server . . . . . . . . . . . : 192.168.11.1 DNS Servers . . . . . . . . . . . : 8.8.8.8 NetBIOS over Tcpip. . . . . . . . : Enabled Oh wait, you said /all Windows IP Configuration Host Name . . . . . . . . . . . . : STEVEDSK Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe FE Family Controller Physical Address. . . . . . . . . : 90-FB-A6-6C-8F-2C Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.0.2 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.1 DHCP Server . . . . . . . . . . . : 192.168.0.1 DNS Servers . . . . . . . . . . . : 192.168.0.1 Lease Obtained. . . . . . . . . . : 13 May 2017 09:28:11 AM Lease Expires . . . . . . . . . . : 14 May 2017 09:28:11 AM Good, now post the same "ipconfig /all" from a PC that can't see yours. What I'm expecting is that there won't be a networking issue, but it needs to be ruled out because everything that comes later depends on that part to be working. If I had to guess, I'd say it's a firewall issue, but that's just a wild guess. While you're at it, that ping test you did earlier, let's go back to that. Try the ping from PC A to PC B, then from PC B to PC A. If it works in one direction but not the other, it's almost certainly a firewall issue, assuming the network (specifically the netmask) is configured correctly. |
#13
|
|||
|
|||
LAN Connections in XP
On Sun, 14 May 2017 06:47:11 -0300, Shadow wrote:
I can't figure out why you get TWO completely different IPs from your two posted ipconfigs. Default Gateway . . . . . . . . . : 192.168.11.1 and Default Gateway . . . . . . . . . : 192.168.0.1 They are incompatible, unless you are using a mask that covers them all (which you are not). Check they are ALL either 192.168.0.x OR 192.168.11.x if the mask is 255.255.255.0 []'s The first one (192.168.11.1) was actually mine, which I was showing as an example of what I wanted to see. Sorry for the confusion. |
#14
|
|||
|
|||
LAN Connections in XP
On Sun, 14 May 2017 10:35:20 -0500, Char Jackson
wrote: On Sun, 14 May 2017 06:47:11 -0300, Shadow wrote: I can't figure out why you get TWO completely different IPs from your two posted ipconfigs. Default Gateway . . . . . . . . . : 192.168.11.1 and Default Gateway . . . . . . . . . : 192.168.0.1 They are incompatible, unless you are using a mask that covers them all (which you are not). Check they are ALL either 192.168.0.x OR 192.168.11.x if the mask is 255.255.255.0 []'s The first one (192.168.11.1) was actually mine, which I was showing as an example of what I wanted to see. Sorry for the confusion. I'm sorry, I was halfway through my first coffee. I hadn't woken my brain up yet. So if the OP is on 192.168.0.2 he should check the other computers by pinging from his computer. ping 192.168.0.3 (or whatever the router assigned to the next client). He can use ipconfig on the other computers to determine their current IPs. If they respond, it's probably a firewall issue. If none respond, maybe he should try pinging the router, his firewall (if he uses a software one) might be blocking ICMP too. ping 192.168.0.1 []'s -- Don't be evil - Google 2004 We have a new policy - Google 2012 |
#15
|
|||
|
|||
LAN Connections in XP
On Sun, 14 May 2017 10:32:35 -0500, Char Jackson
wrote: On Sat, 13 May 2017 20:31:27 +0200, Steve Hayes wrote: On Sat, 13 May 2017 12:01:02 -0500, Char Jackson wrote: On Sat, 13 May 2017 01:54:29 +0200, Steve Hayes wrote: C:\Windows\System32ipconfig /all Windows IP Configuration Ethernet adapter Local Area Connection 3: DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.11.10(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.11.1 DHCP Server . . . . . . . . . . . : 192.168.11.1 DNS Servers . . . . . . . . . . . : 8.8.8.8 NetBIOS over Tcpip. . . . . . . . : Enabled Oh wait, you said /all Windows IP Configuration Host Name . . . . . . . . . . . . : STEVEDSK Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe FE Family Controller Physical Address. . . . . . . . . : 90-FB-A6-6C-8F-2C Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.0.2 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.1 DHCP Server . . . . . . . . . . . : 192.168.0.1 DNS Servers . . . . . . . . . . . : 192.168.0.1 Lease Obtained. . . . . . . . . . : 13 May 2017 09:28:11 AM Lease Expires . . . . . . . . . . : 14 May 2017 09:28:11 AM Good, now post the same "ipconfig /all" from a PC that can't see yours. What I'm expecting is that there won't be a networking issue, but it needs to be ruled out because everything that comes later depends on that part to be working. If I had to guess, I'd say it's a firewall issue, but that's just a wild guess. While you're at it, that ping test you did earlier, let's go back to that. Try the ping from PC A to PC B, then from PC B to PC A. If it works in one direction but not the other, it's almost certainly a firewall issue, assuming the network (specifically the netmask) is configured correctly. The ping didn't work either way. Just waiting for other machine to boot up.... Windows IP Configuration Host Name . . . . . . . . . . . . : Steve-TOSH Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Wireless LAN adapter BearExtender: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : 802.11 USB Wireless LAN Card Physical Address. . . . . . . . . : 00-15-61-52-67-01 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::1d66:c745:ad79:166b%16(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.0.8(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 15 May 2017 05:32:35 AM Lease Expires . . . . . . . . . . : 16 May 2017 05:32:31 AM Default Gateway . . . . . . . . . : 192.168.0.1 DHCP Server . . . . . . . . . . . : 192.168.0.1 DHCPv6 IAID . . . . . . . . . . . : 385881441 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-13-13-08-D2-00-26-22-F2-31-DF DNS Servers . . . . . . . . . . . : 192.168.0.1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe FE Family Controller Physical Address. . . . . . . . . : 00-26-22-F2-31-DF DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Tunnel adapter Local Area Connection* 11: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv6 Address. . . . . . . . . . . : 2001:0:9d38:6abd:c57:37c7:961e:445c(Preferred) Link-local IPv6 Address . . . . . : fe80::c57:37c7:961e:445c%19(Preferred) Default Gateway . . . . . . . . . : :: NetBIOS over Tcpip. . . . . . . . : Disabled Tunnel adapter isatap.{592CE8C6-8641-4C16-A416-BB5734CC3BCE}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft ISATAP Adapter #4 Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes -- Steve Hayes http://www.khanya.org.za/stevesig.htm http://khanya.wordpress.com |
|
Thread Tools | |
Display Modes | |
|
|