If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
xp isn't xp
old computer supposed to be xp home. Says so when I boot it.
New computer, one drive 64 bit vista, the other drive from the old computer. The old xp won't boot so I tried to use my xp-pro disk to fix it. But just says there is a partition with "Another system" on the drive... it doesn't recognize it as xp and wants to delete it. Any possibilities here? From my 64 bit Vista drive is there a way to look at the old drive (as slave) and find out what system is really on it? Thanks John |
Ads |
#2
|
|||
|
|||
xp isn't xp
John wrote:
old computer supposed to be xp home. Says so when I boot it. New computer, one drive 64 bit vista, the other drive from the old computer. The old xp won't boot so I tried to use my xp-pro disk to fix it. But just says there is a partition with "Another system" on the drive... it doesn't recognize it as xp and wants to delete it. Any possibilities here? From my 64 bit Vista drive is there a way to look at the old drive (as slave) and find out what system is really on it? You said it in your own post. - The drive currently has Windows XP Home Edition on it. - You have a Windows XP Professional Edition CD. Conclusion: You cannot repair Windows XP Home Edition with a Windows XP Professional Edition CD. Windows XP comes in different 'editions'. Starter, Home, Professional, Tablet PC, Media Center Edition (two versions of this actually), Professional x64, etc. You cannot use one to repair another - they have different licenses. If you want to repair the Windows XP Home Edition - you need your Windows XP Home Edition CD to do so. Where is your CD for this Old PC? -- Shenan Stanley MS-MVP -- How To Ask Questions The Smart Way http://www.catb.org/~esr/faqs/smart-questions.html |
#3
|
|||
|
|||
xp isn't xp
John wrote:
old computer supposed to be xp home. Says so when I boot it. New computer, one drive 64 bit vista, the other drive from the old computer. The old xp won't boot so I tried to use my xp-pro disk to fix it. But just says there is a partition with "Another system" on the drive... it doesn't recognize it as xp and wants to delete it. Any possibilities here? From my 64 bit Vista drive is there a way to look at the old drive (as slave) and find out what system is really on it? You said it in your own post. - The drive currently has Windows XP Home Edition on it. - You have a Windows XP Professional Edition CD. Conclusion: You cannot repair Windows XP Home Edition with a Windows XP Professional Edition CD. Windows XP comes in different 'editions'. Starter, Home, Professional, Tablet PC, Media Center Edition (two versions of this actually), Professional x64, etc. You cannot use one to repair another - they have different licenses. If you want to repair the Windows XP Home Edition - you need your Windows XP Home Edition CD to do so. Where is your CD for this Old PC? -- Shenan Stanley MS-MVP -- How To Ask Questions The Smart Way http://www.catb.org/~esr/faqs/smart-questions.html |
#4
|
|||
|
|||
xp isn't xp
Lets point out a few things here
The old computers hardware was different from new computer...therefore drivers do not match. New computer was setup to boot Vista..you CANNOT just install another drive in the slave position and expect it to boot The BIOS looks at the Vista drive..finds the MBR and Boots It doesn't bother looking at the XP drive. Under Vista you should be able to see the drive with Explorer or under Computer Management/Disk management. If you really want to boot off the XP drive you will need to disconnect the Vista drive and using your XP CD you will need to do a repair install. Be prepared with XP drivers for new computer. You gave us no hardware information so finding the XP drivers for your specific computer is your task. Also if you have installed all of the service packs you will need a "slipstreamed" version of XP pro with the service packs slipstreamed into it or you will end up having to do all of the "upgrades" again. Once you have this done you can reconnect your Vista drive. Now if you want to boot from XP you will need to enter the BIOS at boot and Change the boot sequence so that the XP drive is 1st choice. peter -- If you find a posting or message from me offensive,inappropriate or disruptive,please ignore it. If you dont know how to ignore a posting complain to me and I will be only too happy to demonstrate :-) "John" wrote in message ... old computer supposed to be xp home. Says so when I boot it. New computer, one drive 64 bit vista, the other drive from the old computer. The old xp won't boot so I tried to use my xp-pro disk to fix it. But just says there is a partition with "Another system" on the drive... it doesn't recognize it as xp and wants to delete it. Any possibilities here? From my 64 bit Vista drive is there a way to look at the old drive (as slave) and find out what system is really on it? Thanks John |
#5
|
|||
|
|||
xp isn't xp
Lets point out a few things here
The old computers hardware was different from new computer...therefore drivers do not match. New computer was setup to boot Vista..you CANNOT just install another drive in the slave position and expect it to boot The BIOS looks at the Vista drive..finds the MBR and Boots It doesn't bother looking at the XP drive. Under Vista you should be able to see the drive with Explorer or under Computer Management/Disk management. If you really want to boot off the XP drive you will need to disconnect the Vista drive and using your XP CD you will need to do a repair install. Be prepared with XP drivers for new computer. You gave us no hardware information so finding the XP drivers for your specific computer is your task. Also if you have installed all of the service packs you will need a "slipstreamed" version of XP pro with the service packs slipstreamed into it or you will end up having to do all of the "upgrades" again. Once you have this done you can reconnect your Vista drive. Now if you want to boot from XP you will need to enter the BIOS at boot and Change the boot sequence so that the XP drive is 1st choice. peter -- If you find a posting or message from me offensive,inappropriate or disruptive,please ignore it. If you dont know how to ignore a posting complain to me and I will be only too happy to demonstrate :-) "John" wrote in message ... old computer supposed to be xp home. Says so when I boot it. New computer, one drive 64 bit vista, the other drive from the old computer. The old xp won't boot so I tried to use my xp-pro disk to fix it. But just says there is a partition with "Another system" on the drive... it doesn't recognize it as xp and wants to delete it. Any possibilities here? From my 64 bit Vista drive is there a way to look at the old drive (as slave) and find out what system is really on it? Thanks John |
#6
|
|||
|
|||
xp isn't xp
"New computer was setup to boot Vista..you CANNOT just install another drive
in the slave position and expect it to boot" Peter, This is confusing to me. There should be no reason why he can't install the drive as a slave and boot the computer. Did you mean he can't install it as a slave and have it boot from the XP drive? |
#7
|
|||
|
|||
xp isn't xp
"New computer was setup to boot Vista..you CANNOT just install another drive
in the slave position and expect it to boot" Peter, This is confusing to me. There should be no reason why he can't install the drive as a slave and boot the computer. Did you mean he can't install it as a slave and have it boot from the XP drive? |
#8
|
|||
|
|||
xp isn't xp
That is what he meant I believe.
-- The following is a signature, don't take it personally unless it applies to you. How to ask a question http://support.microsoft.com/kb/555375 ------ "xr280xr" wrote in message ... "New computer was setup to boot Vista..you CANNOT just install another drive in the slave position and expect it to boot" Peter, This is confusing to me. There should be no reason why he can't install the drive as a slave and boot the computer. Did you mean he can't install it as a slave and have it boot from the XP drive? |
#9
|
|||
|
|||
xp isn't xp
That is what he meant I believe.
-- The following is a signature, don't take it personally unless it applies to you. How to ask a question http://support.microsoft.com/kb/555375 ------ "xr280xr" wrote in message ... "New computer was setup to boot Vista..you CANNOT just install another drive in the slave position and expect it to boot" Peter, This is confusing to me. There should be no reason why he can't install the drive as a slave and boot the computer. Did you mean he can't install it as a slave and have it boot from the XP drive? |
#10
|
|||
|
|||
xp isn't xp
This is what I tried to do. Disconnected the Vista drive. Put xp cd and
booted from that. Tried to do a repair install but it didn't even offer it. I was hoping it would find the correct drivers on the internet. The xp disk I used was unrelated to the original xp disk which is long gone. I have given up... it was just a thought. John peter wrote: Lets point out a few things here The old computers hardware was different from new computer...therefore drivers do not match. New computer was setup to boot Vista..you CANNOT just install another drive in the slave position and expect it to boot The BIOS looks at the Vista drive..finds the MBR and Boots It doesn't bother looking at the XP drive. Under Vista you should be able to see the drive with Explorer or under Computer Management/Disk management. If you really want to boot off the XP drive you will need to disconnect the Vista drive and using your XP CD you will need to do a repair install. Be prepared with XP drivers for new computer. You gave us no hardware information so finding the XP drivers for your specific computer is your task. Also if you have installed all of the service packs you will need a "slipstreamed" version of XP pro with the service packs slipstreamed into it or you will end up having to do all of the "upgrades" again. Once you have this done you can reconnect your Vista drive. Now if you want to boot from XP you will need to enter the BIOS at boot and Change the boot sequence so that the XP drive is 1st choice. peter |
#11
|
|||
|
|||
xp isn't xp
This is what I tried to do. Disconnected the Vista drive. Put xp cd and
booted from that. Tried to do a repair install but it didn't even offer it. I was hoping it would find the correct drivers on the internet. The xp disk I used was unrelated to the original xp disk which is long gone. I have given up... it was just a thought. John peter wrote: Lets point out a few things here The old computers hardware was different from new computer...therefore drivers do not match. New computer was setup to boot Vista..you CANNOT just install another drive in the slave position and expect it to boot The BIOS looks at the Vista drive..finds the MBR and Boots It doesn't bother looking at the XP drive. Under Vista you should be able to see the drive with Explorer or under Computer Management/Disk management. If you really want to boot off the XP drive you will need to disconnect the Vista drive and using your XP CD you will need to do a repair install. Be prepared with XP drivers for new computer. You gave us no hardware information so finding the XP drivers for your specific computer is your task. Also if you have installed all of the service packs you will need a "slipstreamed" version of XP pro with the service packs slipstreamed into it or you will end up having to do all of the "upgrades" again. Once you have this done you can reconnect your Vista drive. Now if you want to boot from XP you will need to enter the BIOS at boot and Change the boot sequence so that the XP drive is 1st choice. peter |
#12
|
|||
|
|||
xp isn't xp
John wrote:
old computer supposed to be xp home. Says so when I boot it. New computer, one drive 64 bit vista, the other drive from the old computer. The old xp won't boot so I tried to use my xp-pro disk to fix it. But just says there is a partition with "Another system" on the drive... it doesn't recognize it as xp and wants to delete it. Any possibilities here? From my 64 bit Vista drive is there a way to look at the old drive (as slave) and find out what system is really on it? peter wrote: Lets point out a few things here The old computers hardware was different from new computer...therefore drivers do not match. New computer was setup to boot Vista..you CANNOT just install another drive in the slave position and expect it to boot The BIOS looks at the Vista drive..finds the MBR and Boots It doesn't bother looking at the XP drive. Under Vista you should be able to see the drive with Explorer or under Computer Management/Disk management. If you really want to boot off the XP drive you will need to disconnect the Vista drive and using your XP CD you will need to do a repair install. Be prepared with XP drivers for new computer. You gave us no hardware information so finding the XP drivers for your specific computer is your task. Also if you have installed all of the service packs you will need a "slipstreamed" version of XP pro with the service packs slipstreamed into it or you will end up having to do all of the "upgrades" again. Once you have this done you can reconnect your Vista drive. Now if you want to boot from XP you will need to enter the BIOS at boot and Change the boot sequence so that the XP drive is 1st choice. John wrote: This is what I tried to do. Disconnected the Vista drive. Put xp cd and booted from that. Tried to do a repair install but it didn't even offer it. I was hoping it would find the correct drivers on the internet. The xp disk I used was unrelated to the original xp disk which is long gone. I have given up... it was just a thought. And it was a different edition - negating your subject line. XP *is* XP. But there are many different editions. You tried to use Professional to repair Home. ;-) -- Shenan Stanley MS-MVP -- How To Ask Questions The Smart Way http://www.catb.org/~esr/faqs/smart-questions.html |
#13
|
|||
|
|||
xp isn't xp
John wrote:
old computer supposed to be xp home. Says so when I boot it. New computer, one drive 64 bit vista, the other drive from the old computer. The old xp won't boot so I tried to use my xp-pro disk to fix it. But just says there is a partition with "Another system" on the drive... it doesn't recognize it as xp and wants to delete it. Any possibilities here? From my 64 bit Vista drive is there a way to look at the old drive (as slave) and find out what system is really on it? peter wrote: Lets point out a few things here The old computers hardware was different from new computer...therefore drivers do not match. New computer was setup to boot Vista..you CANNOT just install another drive in the slave position and expect it to boot The BIOS looks at the Vista drive..finds the MBR and Boots It doesn't bother looking at the XP drive. Under Vista you should be able to see the drive with Explorer or under Computer Management/Disk management. If you really want to boot off the XP drive you will need to disconnect the Vista drive and using your XP CD you will need to do a repair install. Be prepared with XP drivers for new computer. You gave us no hardware information so finding the XP drivers for your specific computer is your task. Also if you have installed all of the service packs you will need a "slipstreamed" version of XP pro with the service packs slipstreamed into it or you will end up having to do all of the "upgrades" again. Once you have this done you can reconnect your Vista drive. Now if you want to boot from XP you will need to enter the BIOS at boot and Change the boot sequence so that the XP drive is 1st choice. John wrote: This is what I tried to do. Disconnected the Vista drive. Put xp cd and booted from that. Tried to do a repair install but it didn't even offer it. I was hoping it would find the correct drivers on the internet. The xp disk I used was unrelated to the original xp disk which is long gone. I have given up... it was just a thought. And it was a different edition - negating your subject line. XP *is* XP. But there are many different editions. You tried to use Professional to repair Home. ;-) -- Shenan Stanley MS-MVP -- How To Ask Questions The Smart Way http://www.catb.org/~esr/faqs/smart-questions.html |
#14
|
|||
|
|||
xp isn't xp
That’s what I meant
peter -- If you find a posting or message from me offensive,inappropriate or disruptive,please ignore it. If you dont know how to ignore a posting complain to me and I will be only too happy to demonstrate :-) "David B." wrote in message ... That is what he meant I believe. -- The following is a signature, don't take it personally unless it applies to you. How to ask a question http://support.microsoft.com/kb/555375 ------ "xr280xr" wrote in message ... "New computer was setup to boot Vista..you CANNOT just install another drive in the slave position and expect it to boot" Peter, This is confusing to me. There should be no reason why he can't install the drive as a slave and boot the computer. Did you mean he can't install it as a slave and have it boot from the XP drive? |
#15
|
|||
|
|||
xp isn't xp
That’s what I meant
peter -- If you find a posting or message from me offensive,inappropriate or disruptive,please ignore it. If you dont know how to ignore a posting complain to me and I will be only too happy to demonstrate :-) "David B." wrote in message ... That is what he meant I believe. -- The following is a signature, don't take it personally unless it applies to you. How to ask a question http://support.microsoft.com/kb/555375 ------ "xr280xr" wrote in message ... "New computer was setup to boot Vista..you CANNOT just install another drive in the slave position and expect it to boot" Peter, This is confusing to me. There should be no reason why he can't install the drive as a slave and boot the computer. Did you mean he can't install it as a slave and have it boot from the XP drive? |
|
Thread Tools | |
Display Modes | |
|
|