XP PRO PROBLEMS

Barry

Change to Manual. Click on the scroll bar to the right of Disabled and
click on Manual, Apply and OK. Restart your computer.

See if that resolves your problem.


--


Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
..

Barry wrote:
Garry: The StarUp box has Disabled showing, not Manalc. Is this good
or bad? Thanks
Barry

"Gerry" wrote in message
...
Barry

Select Start, Control Panel, Administrative Tools, Services and right
click on Windows Image Acquisition (WIA) and select Properties. The
StartUp
type should be Manualc. Is it?


--


Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~


Barry wrote:
I have set up Outlook Express. If this post goes through I have done
it correctly thanks to you all.
Here is an error message I find in Event Viewer-System. There are a
lot of DCOM errors. See if anyone can figure this one out.
Event Type: Error
Event Source: DCOM
Event Category: None
Event ID: 10005
Date: 7/1/2009
Time: 11:19:25 AM
User: OWNER-A45FE9E1D\Owner
Computer: OWNER-A45FE9E1D
Description:
DCOM got error "The service cannot be started, either because it is
disabled or because it has no enabled devices associated with it. "
attempting to start the service StiSvc with arguments "" in order to
run the server: {A1F4E726-8CF1-11D1-BF92-0060081ED811}

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

"Richard" wrote in message
...
To access this newsgroup in Outlook Express, first, in Internet
Explorer: click Tools, click Internet Options, click Programs, in
the Newsgroups box,
make sure Outlook Express is selected, click OK.
Click this Link:
news://msnews.microsoft.com/microsof...ndowsxp.basics

FWIW. --Richard
- - -

"Barry" wrote in message
...
Thanks Roy I have tryed to set up OUTLOOK Express. I have set up
my e-mail,
but when it comes to the News Server Address, along with user name
and password no one seems to know what that is. My ISP Huhesnet is
clueless. That
is under News Groups.
Any ideas?

"Roy Smith" wrote:

Barry wrote:
I can not get Paste to work in this reply window.

"Gerry" wrote:

All errors need to be eliminated. If they are not resolved it
can be difficult to see what is really going on.

Barry wrote:
I looked at EVENT VIEWER. Under system I did not see anything
that looked like BACK UP. Under System there were a lot the
following: ERROR (date and time) DCOM None 10010or10005 Owner
OwnerA4 I have no idea what all that means Under Application
there does not seem to be much.

"Gerry" wrote:

Are there any other Warning or Error reports in the System or
Application logs in Event Viewer during the last 48 hours?

Barry wrote:
I do not get the bacup wizard when trying to back up my
system. There are also a lot of things that do not seem tot
work.

Then quit using the web based interface for the newsgroups and
use a real newsreader. There are several free newsreader
programs to choose from, Outlook Express which comes with WinXP
does newsgroups. Other choices include (but are not limited to)
Thunderbird, Windows Live Mail, SeaMonkey, and Forte Agent.

If you need help setting up OE for newsgroups, look he

http://www.microsoft.com/windows/ie/...e/default.mspx


--

Roy Smith
Windows 7-RC

Barry

Change to Manual. Click on the scroll bar to the right of Disabled and
click on Manual, Apply and OK. Restart your computer.

See if that resolves your problem.


--


Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
..

Barry wrote:
Garry: The StarUp box has Disabled showing, not Manalc. Is this good
or bad? Thanks
Barry

"Gerry" wrote in message
...
Barry

Select Start, Control Panel, Administrative Tools, Services and right
click on Windows Image Acquisition (WIA) and select Properties. The
StartUp
type should be Manualc. Is it?


--


Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~


Barry wrote:
I have set up Outlook Express. If this post goes through I have done
it correctly thanks to you all.
Here is an error message I find in Event Viewer-System. There are a
lot of DCOM errors. See if anyone can figure this one out.
Event Type: Error
Event Source: DCOM
Event Category: None
Event ID: 10005
Date: 7/1/2009
Time: 11:19:25 AM
User: OWNER-A45FE9E1D\Owner
Computer: OWNER-A45FE9E1D
Description:
DCOM got error "The service cannot be started, either because it is
disabled or because it has no enabled devices associated with it. "
attempting to start the service StiSvc with arguments "" in order to
run the server: {A1F4E726-8CF1-11D1-BF92-0060081ED811}

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

"Richard" wrote in message
...
To access this newsgroup in Outlook Express, first, in Internet
Explorer: click Tools, click Internet Options, click Programs, in
the Newsgroups box,
make sure Outlook Express is selected, click OK.
Click this Link:
news://msnews.microsoft.com/microsof...ndowsxp.basics

FWIW. --Richard
- - -

"Barry" wrote in message
...
Thanks Roy I have tryed to set up OUTLOOK Express. I have set up
my e-mail,
but when it comes to the News Server Address, along with user name
and password no one seems to know what that is. My ISP Huhesnet is
clueless. That
is under News Groups.
Any ideas?

"Roy Smith" wrote:

Barry wrote:
I can not get Paste to work in this reply window.

"Gerry" wrote:

All errors need to be eliminated. If they are not resolved it
can be difficult to see what is really going on.

Barry wrote:
I looked at EVENT VIEWER. Under system I did not see anything
that looked like BACK UP. Under System there were a lot the
following: ERROR (date and time) DCOM None 10010or10005 Owner
OwnerA4 I have no idea what all that means Under Application
there does not seem to be much.

"Gerry" wrote:

Are there any other Warning or Error reports in the System or
Application logs in Event Viewer during the last 48 hours?

Barry wrote:
I do not get the bacup wizard when trying to back up my
system. There are also a lot of things that do not seem tot
work.

Then quit using the web based interface for the newsgroups and
use a real newsreader. There are several free newsreader
programs to choose from, Outlook Express which comes with WinXP
does newsgroups. Other choices include (but are not limited to)
Thunderbird, Windows Live Mail, SeaMonkey, and Forte Agent.

If you need help setting up OE for newsgroups, look he

http://www.microsoft.com/windows/ie/...e/default.mspx


--

Roy Smith
Windows 7-RC

Gerry: I tryed that and it did not help, but causes another problem, which
is: When I click on Start, My Computer the window comes up blank with the
little sourch flashlight (torch) moving to and frow until the window is
filled with the correct images. So I went back to Disabled.
Now what?
Thanks

"Gerry" wrote in message
...
Barry

Change to Manual. Click on the scroll bar to the right of Disabled and
click on Manual, Apply and OK. Restart your computer.

See if that resolves your problem.


--


Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
.

Barry wrote:
Garry: The StarUp box has Disabled showing, not Manalc. Is this good
or bad? Thanks
Barry

"Gerry" wrote in message
...
Barry

Select Start, Control Panel, Administrative Tools, Services and right
click on Windows Image Acquisition (WIA) and select Properties. The
StartUp
type should be Manualc. Is it?


--


Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~


Barry wrote:
I have set up Outlook Express. If this post goes through I have done
it correctly thanks to you all.
Here is an error message I find in Event Viewer-System. There are a
lot of DCOM errors. See if anyone can figure this one out.
Event Type: Error
Event Source: DCOM
Event Category: None
Event ID: 10005
Date: 7/1/2009
Time: 11:19:25 AM
User: OWNER-A45FE9E1D\Owner
Computer: OWNER-A45FE9E1D
Description:
DCOM got error "The service cannot be started, either because it is
disabled or because it has no enabled devices associated with it. "
attempting to start the service StiSvc with arguments "" in order to
run the server: {A1F4E726-8CF1-11D1-BF92-0060081ED811}

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

"Richard" wrote in message
...
To access this newsgroup in Outlook Express, first, in Internet
Explorer: click Tools, click Internet Options, click Programs, in
the Newsgroups box,
make sure Outlook Express is selected, click OK.
Click this Link:
news://msnews.microsoft.com/microsof...ndowsxp.basics

FWIW. --Richard
- - -

"Barry" wrote in message
...
Thanks Roy I have tryed to set up OUTLOOK Express. I have set up
my e-mail,
but when it comes to the News Server Address, along with user name
and password no one seems to know what that is. My ISP Huhesnet is
clueless. That
is under News Groups.
Any ideas?

"Roy Smith" wrote:

Barry wrote:
I can not get Paste to work in this reply window.

"Gerry" wrote:

All errors need to be eliminated. If they are not resolved it
can be difficult to see what is really going on.

Barry wrote:
I looked at EVENT VIEWER. Under system I did not see anything
that looked like BACK UP. Under System there were a lot the
following: ERROR (date and time) DCOM None 10010or10005 Owner
OwnerA4 I have no idea what all that means Under Application
there does not seem to be much.

"Gerry" wrote:

Are there any other Warning or Error reports in the System or
Application logs in Event Viewer during the last 48 hours?

Barry wrote:
I do not get the bacup wizard when trying to back up my
system. There are also a lot of things that do not seem tot
work.

Then quit using the web based interface for the newsgroups and
use a real newsreader. There are several free newsreader
programs to choose from, Outlook Express which comes with WinXP
does newsgroups. Other choices include (but are not limited to)
Thunderbird, Windows Live Mail, SeaMonkey, and Forte Agent.

If you need help setting up OE for newsgroups, look he

http://www.microsoft.com/windows/ie/...e/default.mspx


--

Roy Smith
Windows 7-RC

Gerry: I tryed that and it did not help, but causes another problem, which
is: When I click on Start, My Computer the window comes up blank with the
little sourch flashlight (torch) moving to and frow until the window is
filled with the correct images. So I went back to Disabled.
Now what?
Thanks

"Gerry" wrote in message
...
Barry

Change to Manual. Click on the scroll bar to the right of Disabled and
click on Manual, Apply and OK. Restart your computer.

See if that resolves your problem.


--


Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
.

Barry wrote:
Garry: The StarUp box has Disabled showing, not Manalc. Is this good
or bad? Thanks
Barry

"Gerry" wrote in message
...
Barry

Select Start, Control Panel, Administrative Tools, Services and right
click on Windows Image Acquisition (WIA) and select Properties. The
StartUp
type should be Manualc. Is it?


--


Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~


Barry wrote:
I have set up Outlook Express. If this post goes through I have done
it correctly thanks to you all.
Here is an error message I find in Event Viewer-System. There are a
lot of DCOM errors. See if anyone can figure this one out.
Event Type: Error
Event Source: DCOM
Event Category: None
Event ID: 10005
Date: 7/1/2009
Time: 11:19:25 AM
User: OWNER-A45FE9E1D\Owner
Computer: OWNER-A45FE9E1D
Description:
DCOM got error "The service cannot be started, either because it is
disabled or because it has no enabled devices associated with it. "
attempting to start the service StiSvc with arguments "" in order to
run the server: {A1F4E726-8CF1-11D1-BF92-0060081ED811}

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

"Richard" wrote in message
...
To access this newsgroup in Outlook Express, first, in Internet
Explorer: click Tools, click Internet Options, click Programs, in
the Newsgroups box,
make sure Outlook Express is selected, click OK.
Click this Link:
news://msnews.microsoft.com/microsof...ndowsxp.basics

FWIW. --Richard
- - -

"Barry" wrote in message
...
Thanks Roy I have tryed to set up OUTLOOK Express. I have set up
my e-mail,
but when it comes to the News Server Address, along with user name
and password no one seems to know what that is. My ISP Huhesnet is
clueless. That
is under News Groups.
Any ideas?

"Roy Smith" wrote:

Barry wrote:
I can not get Paste to work in this reply window.

"Gerry" wrote:

All errors need to be eliminated. If they are not resolved it
can be difficult to see what is really going on.

Barry wrote:
I looked at EVENT VIEWER. Under system I did not see anything
that looked like BACK UP. Under System there were a lot the
following: ERROR (date and time) DCOM None 10010or10005 Owner
OwnerA4 I have no idea what all that means Under Application
there does not seem to be much.

"Gerry" wrote:

Are there any other Warning or Error reports in the System or
Application logs in Event Viewer during the last 48 hours?

Barry wrote:
I do not get the bacup wizard when trying to back up my
system. There are also a lot of things that do not seem tot
work.

Then quit using the web based interface for the newsgroups and
use a real newsreader. There are several free newsreader
programs to choose from, Outlook Express which comes with WinXP
does newsgroups. Other choices include (but are not limited to)
Thunderbird, Windows Live Mail, SeaMonkey, and Forte Agent.

If you need help setting up OE for newsgroups, look he

http://www.microsoft.com/windows/ie/...e/default.mspx


--

Roy Smith
Windows 7-RC