If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#46
|
|||
|
|||
IPSec monitor snap-in
Thank you, "un"......I shall do that.
Unknown wrote: A suggestion for you. Do a Google for 'windowsxp services tweak guide' and print it out. It has proven very helpful for me. It explains all services and what settings should be. "William B. Lurie" wrote in message ... John John - MVP wrote: William B. Lurie wrote: (snip) John John So now I have the list, and I can decide which of those files I really don't want; that's the next game, right? Well, yes... sort of. You have the list of services, you set the unnecessary services to Manual start. A few of them you set to Disabled, there aren't many services that should be disabled, setting unwanted services to Manual start is usually the way to handle unnecessary services. If you want you can post the list of services and we might suggest obvious candidates for the removal list. John John, I went to StartRuncmd and at the prompt entered tasklist /svc C:\startlist.txt and it executed and made the file. Likewise net start .... http://bellsouthpwp.net/b/i/billurie/startlist.txt is the complete file. I see there about 90% of the items I really wouldn't know what to do with. If you'd like to suggest which I can relegate to "Manual" or even "Off" I'd be willing to give it a go. Ok, now you have something to work with. I have a pretty busy day so I probably won't be able to to get back to you until later today. Do you share a printer with others? If no you can start by disabling File and Printer Sharing, you don't share files and no one accesses your computer on a network so you may as well close this hole the size of Texas on the machine... It's relatively safe when properly secured but it's still a hole the size of Texas and if you don't need it close it. http://safecomputing.umn.edu/guides/fileandprint.html Disable Network Sharing http://www.nnex.net/tech/winxp/file_print.htm Disable File and Print Sharing in Windows XP http://reviews.cnet.com/4520-6600_7-6344921-1.html CNET Security Center How to disable File and Printer Sharing John Thanks, John. I disabled file and printer sharing. When you have time, I welcome your pointing me toward other stuff that is in the tasklist that can be switched to manual. I assume that 'manual' means it does not load on startup but still can be loaded when needed. Bill |
Ads |
#47
|
|||
|
|||
IPSec monitor snap-in
Thank you, "un"......I shall do that.
Unknown wrote: A suggestion for you. Do a Google for 'windowsxp services tweak guide' and print it out. It has proven very helpful for me. It explains all services and what settings should be. "William B. Lurie" wrote in message ... John John - MVP wrote: William B. Lurie wrote: (snip) John John So now I have the list, and I can decide which of those files I really don't want; that's the next game, right? Well, yes... sort of. You have the list of services, you set the unnecessary services to Manual start. A few of them you set to Disabled, there aren't many services that should be disabled, setting unwanted services to Manual start is usually the way to handle unnecessary services. If you want you can post the list of services and we might suggest obvious candidates for the removal list. John John, I went to StartRuncmd and at the prompt entered tasklist /svc C:\startlist.txt and it executed and made the file. Likewise net start .... http://bellsouthpwp.net/b/i/billurie/startlist.txt is the complete file. I see there about 90% of the items I really wouldn't know what to do with. If you'd like to suggest which I can relegate to "Manual" or even "Off" I'd be willing to give it a go. Ok, now you have something to work with. I have a pretty busy day so I probably won't be able to to get back to you until later today. Do you share a printer with others? If no you can start by disabling File and Printer Sharing, you don't share files and no one accesses your computer on a network so you may as well close this hole the size of Texas on the machine... It's relatively safe when properly secured but it's still a hole the size of Texas and if you don't need it close it. http://safecomputing.umn.edu/guides/fileandprint.html Disable Network Sharing http://www.nnex.net/tech/winxp/file_print.htm Disable File and Print Sharing in Windows XP http://reviews.cnet.com/4520-6600_7-6344921-1.html CNET Security Center How to disable File and Printer Sharing John Thanks, John. I disabled file and printer sharing. When you have time, I welcome your pointing me toward other stuff that is in the tasklist that can be switched to manual. I assume that 'manual' means it does not load on startup but still can be loaded when needed. Bill |
#48
|
|||
|
|||
IPSec monitor snap-in
William B. Lurie wrote:
John John - MVP wrote: William B. Lurie wrote: (snip) John John So now I have the list, and I can decide which of those files I really don't want; that's the next game, right? Well, yes... sort of. You have the list of services, you set the unnecessary services to Manual start. A few of them you set to Disabled, there aren't many services that should be disabled, setting unwanted services to Manual start is usually the way to handle unnecessary services. If you want you can post the list of services and we might suggest obvious candidates for the removal list. John John, I went to StartRuncmd and at the prompt entered tasklist /svc C:\startlist.txt and it executed and made the file. Likewise net start .... http://bellsouthpwp.net/b/i/billurie/startlist.txt is the complete file. I see there about 90% of the items I really wouldn't know what to do with. If you'd like to suggest which I can relegate to "Manual" or even "Off" I'd be willing to give it a go. Ok, now you have something to work with. I have a pretty busy day so I probably won't be able to to get back to you until later today. Do you share a printer with others? If no you can start by disabling File and Printer Sharing, you don't share files and no one accesses your computer on a network so you may as well close this hole the size of Texas on the machine... It's relatively safe when properly secured but it's still a hole the size of Texas and if you don't need it close it. http://safecomputing.umn.edu/guides/fileandprint.html Disable Network Sharing http://www.nnex.net/tech/winxp/file_print.htm Disable File and Print Sharing in Windows XP http://reviews.cnet.com/4520-6600_7-6344921-1.html CNET Security Center How to disable File and Printer Sharing John Thanks, John. I disabled file and printer sharing. When you have time, I welcome your pointing me toward other stuff that is in the tasklist that can be switched to manual. I assume that 'manual' means it does not load on startup but still can be loaded when needed. Yes, setting a service to "Manual" means that the service is not set to start when the computer is booted and that it will be loaded if needed. Note that even if set to manual the service might still load when the computer is booted, that is normal, by and large you should not set a service to "Disabled" unless you have good reasons to do so. Also note that some services that are set to manual might not launch properly when needed, in these cases the service must remain as an "Automatic" start service. Let's start with the list of services, after you clean the services up a bit you can then address the Tasklist processes. Please keep the following in mind: 1- Do not change the startup type unless you understand the purpose of the service. 2- Keep a record of the changes that you make, in case you need to reverse them later. 3- Create Restore Points before making changes. 4- Keep in mind that disabling one item might cause other services or processes to also disappear from the start list, a service or process might spawn other processes so it isn't unusual to see more than one thing disappear from the start list when you make changes. Also note that a service might rely on the presence of another service so killing one service might prevent another one from successfully starting. Rerun your "Net Start" and "Tasklist /svc" commands after you make changes and compare with the previous list. 5- Look in the Event Viewer log after you disable services and reboot the machine, make sure that the changes do not trigger errors or warnings. 6- It's your computer, only you know exactly what is being run on it and what is going on with it. We may offer suggestions but ultimately the decisions are yours to make, we can't be held responsible if things go sour. Remember that "One Man's Junk is Another Man's Treasure" and that services or processes that are useless to us might be indispensable to you, no two computers are the same! For the time being lest look at the list of *Services* and some that I would set to manual or disabled: Ati HotKey Poller I would set this service to Manual start or even disable it. Doing away with this might cure the ATI errors showing up in your Event Log. Most people don't make use of ATI HotKeys but before you change the service read here (Look for the entry under Ati2evxx, Atievxx, Atipolab): http://www.answersthatwork.com/Taskl...tasklist_a.htm Distributed Link Tracking Client Set it to manual, I doubt that you have any need for this. DNS Client Set this to manual. Fast User Switching Compatibility You're the sole user on the machine, no need to Fast User Switch, set this service to manual. Machine Debug Manager A pesky thing that probably came to you courtesy of Microsoft Office, set it to manual. This thing can be pretty persistent and a bit difficult to disable. Pervasive PSQL Workgroup Engine I don't know what this is for, are you using database software? Secondary Logon Set this to manual, it allows you to run programs or processes under a different user account (such as the RunAs feature). Most folks never use this. Server If you uninstalled File and Printer Sharing the Server service should no longer be in the list of services. If File and Printer Sharing was only disabled the Server service will still show but it should not be running. For additional security, if the service is still on the list you can set it to disabled, this will prevent File and Printer Sharing from running. SSDP Discovery Service I always set this to disabled and I have never had any problems with it being disabled. There are security concerns around this service and most folks don't want it running on their computers but read here before you disable it: http://www.blackviper.com/WinXP/Serv...ry_Service.htm TCP/IP NetBIOS Helper Set this to manual, only needed for NetBIOS name resolution on networks. Viewpoint Manager Service I haven't a clue what this is for. WebClient Set this to manual. Windows Time Entirely up to you, sets (synchronizes) the time on your computer with a time server on the internet. Wireless Zero Configuration No wireless devices, no need for this. Set it to manual. John |
#49
|
|||
|
|||
IPSec monitor snap-in
William B. Lurie wrote:
John John - MVP wrote: William B. Lurie wrote: (snip) John John So now I have the list, and I can decide which of those files I really don't want; that's the next game, right? Well, yes... sort of. You have the list of services, you set the unnecessary services to Manual start. A few of them you set to Disabled, there aren't many services that should be disabled, setting unwanted services to Manual start is usually the way to handle unnecessary services. If you want you can post the list of services and we might suggest obvious candidates for the removal list. John John, I went to StartRuncmd and at the prompt entered tasklist /svc C:\startlist.txt and it executed and made the file. Likewise net start .... http://bellsouthpwp.net/b/i/billurie/startlist.txt is the complete file. I see there about 90% of the items I really wouldn't know what to do with. If you'd like to suggest which I can relegate to "Manual" or even "Off" I'd be willing to give it a go. Ok, now you have something to work with. I have a pretty busy day so I probably won't be able to to get back to you until later today. Do you share a printer with others? If no you can start by disabling File and Printer Sharing, you don't share files and no one accesses your computer on a network so you may as well close this hole the size of Texas on the machine... It's relatively safe when properly secured but it's still a hole the size of Texas and if you don't need it close it. http://safecomputing.umn.edu/guides/fileandprint.html Disable Network Sharing http://www.nnex.net/tech/winxp/file_print.htm Disable File and Print Sharing in Windows XP http://reviews.cnet.com/4520-6600_7-6344921-1.html CNET Security Center How to disable File and Printer Sharing John Thanks, John. I disabled file and printer sharing. When you have time, I welcome your pointing me toward other stuff that is in the tasklist that can be switched to manual. I assume that 'manual' means it does not load on startup but still can be loaded when needed. Yes, setting a service to "Manual" means that the service is not set to start when the computer is booted and that it will be loaded if needed. Note that even if set to manual the service might still load when the computer is booted, that is normal, by and large you should not set a service to "Disabled" unless you have good reasons to do so. Also note that some services that are set to manual might not launch properly when needed, in these cases the service must remain as an "Automatic" start service. Let's start with the list of services, after you clean the services up a bit you can then address the Tasklist processes. Please keep the following in mind: 1- Do not change the startup type unless you understand the purpose of the service. 2- Keep a record of the changes that you make, in case you need to reverse them later. 3- Create Restore Points before making changes. 4- Keep in mind that disabling one item might cause other services or processes to also disappear from the start list, a service or process might spawn other processes so it isn't unusual to see more than one thing disappear from the start list when you make changes. Also note that a service might rely on the presence of another service so killing one service might prevent another one from successfully starting. Rerun your "Net Start" and "Tasklist /svc" commands after you make changes and compare with the previous list. 5- Look in the Event Viewer log after you disable services and reboot the machine, make sure that the changes do not trigger errors or warnings. 6- It's your computer, only you know exactly what is being run on it and what is going on with it. We may offer suggestions but ultimately the decisions are yours to make, we can't be held responsible if things go sour. Remember that "One Man's Junk is Another Man's Treasure" and that services or processes that are useless to us might be indispensable to you, no two computers are the same! For the time being lest look at the list of *Services* and some that I would set to manual or disabled: Ati HotKey Poller I would set this service to Manual start or even disable it. Doing away with this might cure the ATI errors showing up in your Event Log. Most people don't make use of ATI HotKeys but before you change the service read here (Look for the entry under Ati2evxx, Atievxx, Atipolab): http://www.answersthatwork.com/Taskl...tasklist_a.htm Distributed Link Tracking Client Set it to manual, I doubt that you have any need for this. DNS Client Set this to manual. Fast User Switching Compatibility You're the sole user on the machine, no need to Fast User Switch, set this service to manual. Machine Debug Manager A pesky thing that probably came to you courtesy of Microsoft Office, set it to manual. This thing can be pretty persistent and a bit difficult to disable. Pervasive PSQL Workgroup Engine I don't know what this is for, are you using database software? Secondary Logon Set this to manual, it allows you to run programs or processes under a different user account (such as the RunAs feature). Most folks never use this. Server If you uninstalled File and Printer Sharing the Server service should no longer be in the list of services. If File and Printer Sharing was only disabled the Server service will still show but it should not be running. For additional security, if the service is still on the list you can set it to disabled, this will prevent File and Printer Sharing from running. SSDP Discovery Service I always set this to disabled and I have never had any problems with it being disabled. There are security concerns around this service and most folks don't want it running on their computers but read here before you disable it: http://www.blackviper.com/WinXP/Serv...ry_Service.htm TCP/IP NetBIOS Helper Set this to manual, only needed for NetBIOS name resolution on networks. Viewpoint Manager Service I haven't a clue what this is for. WebClient Set this to manual. Windows Time Entirely up to you, sets (synchronizes) the time on your computer with a time server on the internet. Wireless Zero Configuration No wireless devices, no need for this. Set it to manual. John |
#50
|
|||
|
|||
IPSec monitor snap-in
John John - MVP wrote:
William B. Lurie wrote: John John - MVP wrote: William B. Lurie wrote: (snip) John John So now I have the list, and I can decide which of those files I really don't want; that's the next game, right? Well, yes... sort of. You have the list of services, you set the unnecessary services to Manual start. A few of them you set to Disabled, there aren't many services that should be disabled, setting unwanted services to Manual start is usually the way to handle unnecessary services. If you want you can post the list of services and we might suggest obvious candidates for the removal list. John John, I went to StartRuncmd and at the prompt entered tasklist /svc C:\startlist.txt and it executed and made the file. Likewise net start .... http://bellsouthpwp.net/b/i/billurie/startlist.txt is the complete file. I see there about 90% of the items I really wouldn't know what to do with. If you'd like to suggest which I can relegate to "Manual" or even "Off" I'd be willing to give it a go. Ok, now you have something to work with. I have a pretty busy day so I probably won't be able to to get back to you until later today. Do you share a printer with others? If no you can start by disabling File and Printer Sharing, you don't share files and no one accesses your computer on a network so you may as well close this hole the size of Texas on the machine... It's relatively safe when properly secured but it's still a hole the size of Texas and if you don't need it close it. http://safecomputing.umn.edu/guides/fileandprint.html Disable Network Sharing http://www.nnex.net/tech/winxp/file_print.htm Disable File and Print Sharing in Windows XP http://reviews.cnet.com/4520-6600_7-6344921-1.html CNET Security Center How to disable File and Printer Sharing John Thanks, John. I disabled file and printer sharing. When you have time, I welcome your pointing me toward other stuff that is in the tasklist that can be switched to manual. I assume that 'manual' means it does not load on startup but still can be loaded when needed. Yes, setting a service to "Manual" means that the service is not set to start when the computer is booted and that it will be loaded if needed. Note that even if set to manual the service might still load when the computer is booted, that is normal, by and large you should not set a service to "Disabled" unless you have good reasons to do so. Also note that some services that are set to manual might not launch properly when needed, in these cases the service must remain as an "Automatic" start service. Let's start with the list of services, after you clean the services up a bit you can then address the Tasklist processes. Please keep the following in mind: 1- Do not change the startup type unless you understand the purpose of the service. 2- Keep a record of the changes that you make, in case you need to reverse them later. 3- Create Restore Points before making changes. 4- Keep in mind that disabling one item might cause other services or processes to also disappear from the start list, a service or process might spawn other processes so it isn't unusual to see more than one thing disappear from the start list when you make changes. Also note that a service might rely on the presence of another service so killing one service might prevent another one from successfully starting. Rerun your "Net Start" and "Tasklist /svc" commands after you make changes and compare with the previous list. 5- Look in the Event Viewer log after you disable services and reboot the machine, make sure that the changes do not trigger errors or warnings. 6- It's your computer, only you know exactly what is being run on it and what is going on with it. We may offer suggestions but ultimately the decisions are yours to make, we can't be held responsible if things go sour. Remember that "One Man's Junk is Another Man's Treasure" and that services or processes that are useless to us might be indispensable to you, no two computers are the same! For the time being lest look at the list of *Services* and some that I would set to manual or disabled: Ati HotKey Poller I would set this service to Manual start or even disable it. Doing away with this might cure the ATI errors showing up in your Event Log. Most people don't make use of ATI HotKeys but before you change the service read here (Look for the entry under Ati2evxx, Atievxx, Atipolab): http://www.answersthatwork.com/Taskl...tasklist_a.htm Distributed Link Tracking Client Set it to manual, I doubt that you have any need for this. DNS Client Set this to manual. Fast User Switching Compatibility You're the sole user on the machine, no need to Fast User Switch, set this service to manual. Machine Debug Manager A pesky thing that probably came to you courtesy of Microsoft Office, set it to manual. This thing can be pretty persistent and a bit difficult to disable. Pervasive PSQL Workgroup Engine I don't know what this is for, are you using database software? Secondary Logon Set this to manual, it allows you to run programs or processes under a different user account (such as the RunAs feature). Most folks never use this. Server If you uninstalled File and Printer Sharing the Server service should no longer be in the list of services. If File and Printer Sharing was only disabled the Server service will still show but it should not be running. For additional security, if the service is still on the list you can set it to disabled, this will prevent File and Printer Sharing from running. SSDP Discovery Service I always set this to disabled and I have never had any problems with it being disabled. There are security concerns around this service and most folks don't want it running on their computers but read here before you disable it: http://www.blackviper.com/WinXP/Serv...ry_Service.htm TCP/IP NetBIOS Helper Set this to manual, only needed for NetBIOS name resolution on networks. Viewpoint Manager Service I haven't a clue what this is for. WebClient Set this to manual. Windows Time Entirely up to you, sets (synchronizes) the time on your computer with a time server on the internet. Wireless Zero Configuration No wireless devices, no need for this. Set it to manual. John Thanks for spending the time, John. I do appreciate it. Bill |
#51
|
|||
|
|||
IPSec monitor snap-in
John John - MVP wrote:
William B. Lurie wrote: John John - MVP wrote: William B. Lurie wrote: (snip) John John So now I have the list, and I can decide which of those files I really don't want; that's the next game, right? Well, yes... sort of. You have the list of services, you set the unnecessary services to Manual start. A few of them you set to Disabled, there aren't many services that should be disabled, setting unwanted services to Manual start is usually the way to handle unnecessary services. If you want you can post the list of services and we might suggest obvious candidates for the removal list. John John, I went to StartRuncmd and at the prompt entered tasklist /svc C:\startlist.txt and it executed and made the file. Likewise net start .... http://bellsouthpwp.net/b/i/billurie/startlist.txt is the complete file. I see there about 90% of the items I really wouldn't know what to do with. If you'd like to suggest which I can relegate to "Manual" or even "Off" I'd be willing to give it a go. Ok, now you have something to work with. I have a pretty busy day so I probably won't be able to to get back to you until later today. Do you share a printer with others? If no you can start by disabling File and Printer Sharing, you don't share files and no one accesses your computer on a network so you may as well close this hole the size of Texas on the machine... It's relatively safe when properly secured but it's still a hole the size of Texas and if you don't need it close it. http://safecomputing.umn.edu/guides/fileandprint.html Disable Network Sharing http://www.nnex.net/tech/winxp/file_print.htm Disable File and Print Sharing in Windows XP http://reviews.cnet.com/4520-6600_7-6344921-1.html CNET Security Center How to disable File and Printer Sharing John Thanks, John. I disabled file and printer sharing. When you have time, I welcome your pointing me toward other stuff that is in the tasklist that can be switched to manual. I assume that 'manual' means it does not load on startup but still can be loaded when needed. Yes, setting a service to "Manual" means that the service is not set to start when the computer is booted and that it will be loaded if needed. Note that even if set to manual the service might still load when the computer is booted, that is normal, by and large you should not set a service to "Disabled" unless you have good reasons to do so. Also note that some services that are set to manual might not launch properly when needed, in these cases the service must remain as an "Automatic" start service. Let's start with the list of services, after you clean the services up a bit you can then address the Tasklist processes. Please keep the following in mind: 1- Do not change the startup type unless you understand the purpose of the service. 2- Keep a record of the changes that you make, in case you need to reverse them later. 3- Create Restore Points before making changes. 4- Keep in mind that disabling one item might cause other services or processes to also disappear from the start list, a service or process might spawn other processes so it isn't unusual to see more than one thing disappear from the start list when you make changes. Also note that a service might rely on the presence of another service so killing one service might prevent another one from successfully starting. Rerun your "Net Start" and "Tasklist /svc" commands after you make changes and compare with the previous list. 5- Look in the Event Viewer log after you disable services and reboot the machine, make sure that the changes do not trigger errors or warnings. 6- It's your computer, only you know exactly what is being run on it and what is going on with it. We may offer suggestions but ultimately the decisions are yours to make, we can't be held responsible if things go sour. Remember that "One Man's Junk is Another Man's Treasure" and that services or processes that are useless to us might be indispensable to you, no two computers are the same! For the time being lest look at the list of *Services* and some that I would set to manual or disabled: Ati HotKey Poller I would set this service to Manual start or even disable it. Doing away with this might cure the ATI errors showing up in your Event Log. Most people don't make use of ATI HotKeys but before you change the service read here (Look for the entry under Ati2evxx, Atievxx, Atipolab): http://www.answersthatwork.com/Taskl...tasklist_a.htm Distributed Link Tracking Client Set it to manual, I doubt that you have any need for this. DNS Client Set this to manual. Fast User Switching Compatibility You're the sole user on the machine, no need to Fast User Switch, set this service to manual. Machine Debug Manager A pesky thing that probably came to you courtesy of Microsoft Office, set it to manual. This thing can be pretty persistent and a bit difficult to disable. Pervasive PSQL Workgroup Engine I don't know what this is for, are you using database software? Secondary Logon Set this to manual, it allows you to run programs or processes under a different user account (such as the RunAs feature). Most folks never use this. Server If you uninstalled File and Printer Sharing the Server service should no longer be in the list of services. If File and Printer Sharing was only disabled the Server service will still show but it should not be running. For additional security, if the service is still on the list you can set it to disabled, this will prevent File and Printer Sharing from running. SSDP Discovery Service I always set this to disabled and I have never had any problems with it being disabled. There are security concerns around this service and most folks don't want it running on their computers but read here before you disable it: http://www.blackviper.com/WinXP/Serv...ry_Service.htm TCP/IP NetBIOS Helper Set this to manual, only needed for NetBIOS name resolution on networks. Viewpoint Manager Service I haven't a clue what this is for. WebClient Set this to manual. Windows Time Entirely up to you, sets (synchronizes) the time on your computer with a time server on the internet. Wireless Zero Configuration No wireless devices, no need for this. Set it to manual. John Thanks for spending the time, John. I do appreciate it. Bill |
#52
|
|||
|
|||
IPSec monitor snap-in
William B. Lurie wrote:
John John - MVP wrote: William B. Lurie wrote: John John - MVP wrote: William B. Lurie wrote: (snip) John John So now I have the list, and I can decide which of those files I really don't want; that's the next game, right? Well, yes... sort of. You have the list of services, you set the unnecessary services to Manual start. A few of them you set to Disabled, there aren't many services that should be disabled, setting unwanted services to Manual start is usually the way to handle unnecessary services. If you want you can post the list of services and we might suggest obvious candidates for the removal list. John John, I went to StartRuncmd and at the prompt entered tasklist /svc C:\startlist.txt and it executed and made the file. Likewise net start .... http://bellsouthpwp.net/b/i/billurie/startlist.txt is the complete file. I see there about 90% of the items I really wouldn't know what to do with. If you'd like to suggest which I can relegate to "Manual" or even "Off" I'd be willing to give it a go. Ok, now you have something to work with. I have a pretty busy day so I probably won't be able to to get back to you until later today. Do you share a printer with others? If no you can start by disabling File and Printer Sharing, you don't share files and no one accesses your computer on a network so you may as well close this hole the size of Texas on the machine... It's relatively safe when properly secured but it's still a hole the size of Texas and if you don't need it close it. http://safecomputing.umn.edu/guides/fileandprint.html Disable Network Sharing http://www.nnex.net/tech/winxp/file_print.htm Disable File and Print Sharing in Windows XP http://reviews.cnet.com/4520-6600_7-6344921-1.html CNET Security Center How to disable File and Printer Sharing John Thanks, John. I disabled file and printer sharing. When you have time, I welcome your pointing me toward other stuff that is in the tasklist that can be switched to manual. I assume that 'manual' means it does not load on startup but still can be loaded when needed. Yes, setting a service to "Manual" means that the service is not set to start when the computer is booted and that it will be loaded if needed. Note that even if set to manual the service might still load when the computer is booted, that is normal, by and large you should not set a service to "Disabled" unless you have good reasons to do so. Also note that some services that are set to manual might not launch properly when needed, in these cases the service must remain as an "Automatic" start service. Let's start with the list of services, after you clean the services up a bit you can then address the Tasklist processes. Please keep the following in mind: 1- Do not change the startup type unless you understand the purpose of the service. 2- Keep a record of the changes that you make, in case you need to reverse them later. 3- Create Restore Points before making changes. 4- Keep in mind that disabling one item might cause other services or processes to also disappear from the start list, a service or process might spawn other processes so it isn't unusual to see more than one thing disappear from the start list when you make changes. Also note that a service might rely on the presence of another service so killing one service might prevent another one from successfully starting. Rerun your "Net Start" and "Tasklist /svc" commands after you make changes and compare with the previous list. 5- Look in the Event Viewer log after you disable services and reboot the machine, make sure that the changes do not trigger errors or warnings. 6- It's your computer, only you know exactly what is being run on it and what is going on with it. We may offer suggestions but ultimately the decisions are yours to make, we can't be held responsible if things go sour. Remember that "One Man's Junk is Another Man's Treasure" and that services or processes that are useless to us might be indispensable to you, no two computers are the same! For the time being lest look at the list of *Services* and some that I would set to manual or disabled: Ati HotKey Poller I would set this service to Manual start or even disable it. Doing away with this might cure the ATI errors showing up in your Event Log. Most people don't make use of ATI HotKeys but before you change the service read here (Look for the entry under Ati2evxx, Atievxx, Atipolab): http://www.answersthatwork.com/Taskl...tasklist_a.htm Distributed Link Tracking Client Set it to manual, I doubt that you have any need for this. DNS Client Set this to manual. Fast User Switching Compatibility You're the sole user on the machine, no need to Fast User Switch, set this service to manual. Machine Debug Manager A pesky thing that probably came to you courtesy of Microsoft Office, set it to manual. This thing can be pretty persistent and a bit difficult to disable. Pervasive PSQL Workgroup Engine I don't know what this is for, are you using database software? Secondary Logon Set this to manual, it allows you to run programs or processes under a different user account (such as the RunAs feature). Most folks never use this. Server If you uninstalled File and Printer Sharing the Server service should no longer be in the list of services. If File and Printer Sharing was only disabled the Server service will still show but it should not be running. For additional security, if the service is still on the list you can set it to disabled, this will prevent File and Printer Sharing from running. SSDP Discovery Service I always set this to disabled and I have never had any problems with it being disabled. There are security concerns around this service and most folks don't want it running on their computers but read here before you disable it: http://www.blackviper.com/WinXP/Serv...ry_Service.htm TCP/IP NetBIOS Helper Set this to manual, only needed for NetBIOS name resolution on networks. Viewpoint Manager Service I haven't a clue what this is for. WebClient Set this to manual. Windows Time Entirely up to you, sets (synchronizes) the time on your computer with a time server on the internet. Wireless Zero Configuration No wireless devices, no need for this. Set it to manual. John Thanks for spending the time, John. I do appreciate it. You're welcome. John |
#53
|
|||
|
|||
IPSec monitor snap-in
William B. Lurie wrote:
John John - MVP wrote: William B. Lurie wrote: John John - MVP wrote: William B. Lurie wrote: (snip) John John So now I have the list, and I can decide which of those files I really don't want; that's the next game, right? Well, yes... sort of. You have the list of services, you set the unnecessary services to Manual start. A few of them you set to Disabled, there aren't many services that should be disabled, setting unwanted services to Manual start is usually the way to handle unnecessary services. If you want you can post the list of services and we might suggest obvious candidates for the removal list. John John, I went to StartRuncmd and at the prompt entered tasklist /svc C:\startlist.txt and it executed and made the file. Likewise net start .... http://bellsouthpwp.net/b/i/billurie/startlist.txt is the complete file. I see there about 90% of the items I really wouldn't know what to do with. If you'd like to suggest which I can relegate to "Manual" or even "Off" I'd be willing to give it a go. Ok, now you have something to work with. I have a pretty busy day so I probably won't be able to to get back to you until later today. Do you share a printer with others? If no you can start by disabling File and Printer Sharing, you don't share files and no one accesses your computer on a network so you may as well close this hole the size of Texas on the machine... It's relatively safe when properly secured but it's still a hole the size of Texas and if you don't need it close it. http://safecomputing.umn.edu/guides/fileandprint.html Disable Network Sharing http://www.nnex.net/tech/winxp/file_print.htm Disable File and Print Sharing in Windows XP http://reviews.cnet.com/4520-6600_7-6344921-1.html CNET Security Center How to disable File and Printer Sharing John Thanks, John. I disabled file and printer sharing. When you have time, I welcome your pointing me toward other stuff that is in the tasklist that can be switched to manual. I assume that 'manual' means it does not load on startup but still can be loaded when needed. Yes, setting a service to "Manual" means that the service is not set to start when the computer is booted and that it will be loaded if needed. Note that even if set to manual the service might still load when the computer is booted, that is normal, by and large you should not set a service to "Disabled" unless you have good reasons to do so. Also note that some services that are set to manual might not launch properly when needed, in these cases the service must remain as an "Automatic" start service. Let's start with the list of services, after you clean the services up a bit you can then address the Tasklist processes. Please keep the following in mind: 1- Do not change the startup type unless you understand the purpose of the service. 2- Keep a record of the changes that you make, in case you need to reverse them later. 3- Create Restore Points before making changes. 4- Keep in mind that disabling one item might cause other services or processes to also disappear from the start list, a service or process might spawn other processes so it isn't unusual to see more than one thing disappear from the start list when you make changes. Also note that a service might rely on the presence of another service so killing one service might prevent another one from successfully starting. Rerun your "Net Start" and "Tasklist /svc" commands after you make changes and compare with the previous list. 5- Look in the Event Viewer log after you disable services and reboot the machine, make sure that the changes do not trigger errors or warnings. 6- It's your computer, only you know exactly what is being run on it and what is going on with it. We may offer suggestions but ultimately the decisions are yours to make, we can't be held responsible if things go sour. Remember that "One Man's Junk is Another Man's Treasure" and that services or processes that are useless to us might be indispensable to you, no two computers are the same! For the time being lest look at the list of *Services* and some that I would set to manual or disabled: Ati HotKey Poller I would set this service to Manual start or even disable it. Doing away with this might cure the ATI errors showing up in your Event Log. Most people don't make use of ATI HotKeys but before you change the service read here (Look for the entry under Ati2evxx, Atievxx, Atipolab): http://www.answersthatwork.com/Taskl...tasklist_a.htm Distributed Link Tracking Client Set it to manual, I doubt that you have any need for this. DNS Client Set this to manual. Fast User Switching Compatibility You're the sole user on the machine, no need to Fast User Switch, set this service to manual. Machine Debug Manager A pesky thing that probably came to you courtesy of Microsoft Office, set it to manual. This thing can be pretty persistent and a bit difficult to disable. Pervasive PSQL Workgroup Engine I don't know what this is for, are you using database software? Secondary Logon Set this to manual, it allows you to run programs or processes under a different user account (such as the RunAs feature). Most folks never use this. Server If you uninstalled File and Printer Sharing the Server service should no longer be in the list of services. If File and Printer Sharing was only disabled the Server service will still show but it should not be running. For additional security, if the service is still on the list you can set it to disabled, this will prevent File and Printer Sharing from running. SSDP Discovery Service I always set this to disabled and I have never had any problems with it being disabled. There are security concerns around this service and most folks don't want it running on their computers but read here before you disable it: http://www.blackviper.com/WinXP/Serv...ry_Service.htm TCP/IP NetBIOS Helper Set this to manual, only needed for NetBIOS name resolution on networks. Viewpoint Manager Service I haven't a clue what this is for. WebClient Set this to manual. Windows Time Entirely up to you, sets (synchronizes) the time on your computer with a time server on the internet. Wireless Zero Configuration No wireless devices, no need for this. Set it to manual. John Thanks for spending the time, John. I do appreciate it. You're welcome. John |
Thread Tools | |
Display Modes | |
|
|